User Manual
Model: Bluedio T6S

Headphone overview

Bluedio T6S

Operational instruction:

Power on:
when headphone is off, press and hold MF button until you hear ”Power on”.

Power off:
When the headphone Is on. press and hold MF button until you hear ••power off”.

Pairing mode:
When the headphone is off, press and hold the MF button until you hear”Ready to pair”.

Bluetooth Pairing:
Make sure the headphone enter pairing mode( see instruction ”Pairing mode”). and turn on Bluetooth function of your phone, select “T6S”.

Music control:
When playing music. press the MF button once to Pause/Play. (Users can increase/reduce volume. or skip to previous/next track via cellphone control.)

Answer/Reject a call:
Receiving an Incoming call,press the MF button once to Answer/End; Press and hold it for 2 seconds to refuse.

ANC Switch:
Push the ANC switch to turn on the ANC function, in about 3 seconds, ANC will be on, and LED light remains green.

Line-in music playback:
Connect the headset with your mob lies phone and computers via 3.5mm Type-C audio cable to play music.
Note: Please tum off Iha headphone before using this function. (audio cable is not provided, if you need it. please order one from Bluedio Official purchase channel.)

Line-out music playback:
Connect headphone 1 with phone via Bluetooth. then tum off ANC feature. Connect headphone 1 with the headphone switch 3.5 mm Type-C audio cable to play music.
Note: Please tum off ANC feature before using this function, and headphone
2 should support 3.5 mm audio connection. (audio cable is not provided. if you need it, please order one from Bluedio official purchase channel.)

Charging the headphone:
Switch off The headset before charging, and use standard charging cable to connect the headphone or wall charger, when it is charging, LED light remains red.
Allow 1.5-2 hours for full charging, once fully charged, LED blue light stays on.

Smart sensors:
Take off the headphone when it is playing music. the song will automatically pause, when you wear it again, music will be restored.

Cloud function:
The headphones support Cloud service. Users can download the APP by scanning the QR code on the last page.

Waka up the cloud( Installed the Cloud APP on your phone)
Connect the headset with your phone, then double-click the MF button to wake up the Cloud. Cloud service is on. you can enjoy smart Cloud service.

Specifications:
Bluetooth version: Bluetooth5.0
Bluetooth range: up to 10 m (free space)
Transmission frequency: 2.4GHz-2.48GHz
Bluetooth Profiles:A2DP, AVRCP, HSP. HFP
Driver units: 57mm
Noise cancelling sensitivity:- 25dB
lmpendence: 16n
Frequency response: 15 Hz-25KHz
Sound pressure level(SPL):115d8
Standby time: about 350 hours
Bluetooth music/talk time: about 32 hours
Working time( For Only Running the ANC): about43 hours
Charging time: 1.5-2 hours for full charge
Operating temperature range: -10″C to 50-C only
Charging voltage/current: 5V/500mA
Power Consumption: 50mW+50mW

Purchase verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the coda on our official website: www.bluedio.com for purchase verification.

Learn more and get support
Welcome to visit our official website: www.bluedlo.com;
Or to email us at [email protected]; Orto call us at400-889-0123.

Common Issues and solution:

Common Issues and solution

Questions about your Manual ? Post in the comments!

Leave a comment

Your email address will not be published. Required fields are marked *