blue built BBWEBK24 Wireless Ergonomic Bluetooth Keyboard
Specifications
| Input in Volt, Ampere and Watt | 5V⎓500mA, 2.5W |
| Standby current | ≤ 3.5mA (without backlight) ≤ 200mA (backlight on) |
| Weight | 1019±15g |
| Dimensions | 418 x 244 x 32.7 mm |
| Housing material | ABS + PU |
| Operating temperature | -10°C ~ 40°C |
| Storage temperature | -15°C ~ 65°C |
| Electrical class I, II or III | II |
| Lithium battery | 2000mAh |
Product Usage Instructions
Connect Your Keyboard
Flip the switch to turn on the keyboard. The battery light indicator will be on for 3 seconds indicating that the keyboard is turned on.
Connect via USB
Switch to 2.4G mode, take out the dongle from the bottom of the keyboard, and insert it into the device you want to connect to. The 2.4G indicator light will turn on, indicating a successful connection.
Connect via Bluetooth
Choose Bluetooth 1 or 2, press the corresponding key for 3 seconds until the light starts blinking fast. Open Bluetooth settings on your device and select the keyboard to establish a
connection.
Reset
To reset Bluetooth connection keys, press down Bluetooth 1 or 2 for 5 seconds and repeat the connection steps for a new device.
Keyboard Indicators
The battery indicator shows power status. The keyboard goes into sleep mode after 30 minutes of inactivity; press any key to wake it up.
Set Keyboard Color
To turn on the backlight, press F12. Adjust brightness with repeated presses and change colors by pressing Fn and Tab keys. The light turns off after 1 minute of inactivity.
Charge Your Keyboard
No specific charging instructions provided in the manual.
FAQ:
Q: How do I charge the keyboard?
A: The manual does not provide specific instructions for charging the keyboard. Please refer to any additional documentation or contact customer support for assistance with charging.
CONNECT YOUR KEYBOARD
Flip the switch and turn on your keyboard. The battery light indicator is on for 3 seconds. Your keyboard is now turned on.
CONNECT VIA USB
Press the 2.4G mode. Take the dongle out of the bottom of the keyboard. Place this in the device you want to connect the keyboard to. The light of the 2.4G indicator is on. The keyboard is now connected..
Note: doesn’t it connect by itself?
Turn the keyboard off and on with the switch. Choose the 2.4G mode. Press ‘ESC’ and ‘=’ at the same time. Hold these for 3 seconds. The green light will start blinking. Place the USB receiver in the device you want to connect the keyboard to. Test the connection and press a random Fn key, such as the sound. The light colors green and the keyboard is connected again. Doesn’t it work? Repeat the steps.
CONNECT VIA BLUETOOTH
Choose Bluetooth 1 or 2. The blue light of Bluetooth 1 or the red light of Bluetooth 2 blinks slowly. Press the chosen key for 3 seconds until the blue light starts blinking fast.Open the Bluetooth settings on your device and select the keyboard. The connection will set itself up.
RESET
Press down Bluetooth 1 or 2 for 5 seconds and reset this key. Repeat the steps and connect a new device.
KEYBOARD INDICATORS
The battery indicator shows you that the keyboard is on. If the keyboard isn’t used for 30 minutes, it goes into sleep mode. Press a random key to get the keyboard out of sleep mode.
Press the key of the source you want to connect the keyboard to. You can switch again by pressing a different source key.
Battery indicator
USB/Bluetooth connection
NumLock
CapsLock
SET KEYBOARD COLOR
Press F12 and turn on the keyboard backlight. Press repeatedly and adjust the brightness. Press Fn and Tab to adjust the color. When the keyboard isn’t used for 1 minute, the light turns off. Press a random key to turn on the light again.
CHARGE YOUR KEYBOARD
When the battery is almost empty, the red light of the battery indicator blinks until the keyboard is empty. Connect the included USB-C cable to the top of the keyboard to charge it.
Note: when the battery is almost empty, the connection of the keyboard can slow down or become unstable.
KEYS AND FUNCTIONS
DECLARATION OF CONFORMITY
SAFETY INSTRUCTIONS
- Always follow these instructions and note the warnings, save this document for future use as long as you own or use the device, and give it to the next users of the device.
- Make sure you read and understand the entire manual before you use the device.
- Use the device only in the application for which it is intended, namely as a device connected to a laptop or computer with which, by pressing keys, letters, numbers and symbols appear on the screen.
- Before you connect a device, check if the output power of the charger provides enough power for the connected device.
- Don’t expose the device to extreme heat, like sunlight or fire. Avoid sudden temperature shifts.
- Don’t use or use the device in moist or wet conditions.
- Don’t use the device close to explosive gasses or flammable materials.
- Don’t burn the device.
- Avoid contact with the chemicals of the battery. When the chemicals of the battery come into contact with skin or the eyes, stop using the device right away, use plenty of water to rinse off the chemicals, and contact a doctor.
- Don’t throw, shake, vibrate, drop, or mechanically misuse the device and don’t expose it to impacts.
- Don’t cover the device with objects that affect the heat dispersal.
- Only use the device with the included cables or with cables that came with the device. Don’t use the device when the included cables are damaged or have gotten damaged over time.
- Disconnect the device when it’s not in use. Don’t charge or discharge the device unsupervised.
- Keep the device away from children.
- Don’t disassemble, open, or repair the device.
- Only clean the device with a damp cloth with water. Don’t use (aggressive) cleaning agents.
- This device can be used by people with reduced physical, sensory, or mental capacity, or by people without experience and knowledge, given that they’re supervised or have gotten instructions about safe use of the product and understand any dangers.
WARRANTY AND LIABILITY
This device comes with a warranty period of five (5) years after the date of purchase. For more information about the warranty terms and conditions, go to www.coolblue.nl/en/customer-service. Coolblue B.V. can in no way be held liable for material and immaterial damage suffered by you, others, the device, other property, or the property of others due to non-compliance with the instructions in this manual.
Hereby, Coolblue B.V. declares that this product is in compliance with RoHS Directive 2011/65/EU and Radio Equipment Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at www.coolblue.nl/en/product/950407.
This symbol on the product indicates that it can’t be treated as regular waste, but that it’s supposed to be collected separately. Hand the product in at a collection point for the recycling of electronic devices if you live in the EU or in a different European country that has a separate collection system for electronic devices. If you correctly dispose of the product, you help to avoid risks for the environment and public health which might arise by the mishandling of disposed devices. Recycling materials contributes to the maintenance of our natural resources.
BlueBuilt is a registered trademark of Coolbue B.V., Weena 664, 3012 CN Rotterdam, The Netherlands.
Documents / Resources
 | blue built BBWEBK24 Wireless Ergonomic Bluetooth Keyboard [pdf] Instruction Manual 950407, BBWEBK24, BBWEBK24 Wireless Ergonomic Bluetooth Keyboard, BBWEBK24, Wireless Ergonomic Bluetooth Keyboard, Ergonomic Bluetooth Keyboard, Bluetooth Keyboard, Keyboard |
