BLU C7 Dual SIM Smartphone BLU C7 Dual SIM Smartphone
All phones may be interfered, which affect phone calls.
Use only in the normal position. Do not touch the antenna area unnecessarily.
Only qualified personnel may install or repair this product.
Your device is non water-resistant. Keep it dry.
Ensure the phone is switched on and in service. Enter the emergency number and press the Dialer icon.
Keep your device out the reach of children in case of accidental injury caused by incorrect use of the device as toys.
|1. Earphone jack |
3. Light sensor / Proximity sensor
4. SIM card slot
5. Front camera
6. Adjust the volume key
7. Power key
|7. USB Connector |
9. USB jack
10. Rear Camera
Insert the SIM card correctly in the card slot(s) (See figure below), and suggest switching off the phone when you insert the SIM card.
Insert the Micro SD card into the slot in the correct direction (See figure below), suggest switching off the phone when you insert Micro SD.
Note: Use only compatible memory cards with this device. Incompatible memory cards may damage the card or the device and corrupt the data stored in the card.
During charging, the battery indicator on the phone is a thunder icon. If the device is switched off during charging, there will still be a charging indication on the screen that shows the phone is being charged. If the device is overused when the battery is low, the charging icon might take some time to appear.
When the battery indicator on the screen display ‘Battery is full’, the thunder icon will disappear, which means the completion of charging. If the phone is switched off during charging, the screen will display ‘ Battery is full ‘. It generally takes 4 hours to charge the battery. During charging, the battery, the device and the charger will get hot. This is normal.
Unplug the charger from the AC electrical outlet and disconnect the wiring between the phone and the charger after charging. .
Cautions: Charge the phone in a well-ventilated place in which the temperature is between -10℃ to +55℃. Use the charger provided by the manufacturer only. The use of an unconfirmed charger may lead to dangers and violate the manufacturer’s warranty clause. If the temperature is too high or too low during charging, the device will automatically send a warning and stop charging to avoid damage to the battery or any danger.
Press the power button to enter Sleep mode and meanwhile, the screen will be locked; press power button again to wake up and then swipe up for unlock.
Press menu key.
Swipe to right to view Call history and Contacts.
|Press the number if you want to see the details, send message or call back, there are three options for you.|
Press the number, you can view the contact details, send a message or call back.
When there is an incoming call, you can drag the icon up or down to answer or hang up it directly.
Click here to add new contact and in this page press menu key to enter menu view, setting, etc.
Long press one of the all message threads, you can delete it”.
Enter Setting > App.
You can see app info.
For your entertainment purpose, your device is provided with several interesting games, applications and utilities, such as Gmail, Email, Play Store.Before accessing the applications, please turn on the data connection or connect to wifi.
Model: G71 PLUS
4G: FDD: B/2/4/5/7/12/17/66
Google, Google Play, Google Pay, YouTube and other marks are trademarks of Google LLC.
Federal Communication Commission Interference Statement
FCC ID: YHLBLUG71L
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Radiation Exposure Statement:
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions (10mm) accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands.
|BLU PRODUCTS G71L Dual SIM Smartphone [pdf] User Guide|
BLUG71L, YHLBLUG71L, G71L, Dual SIM Smartphone, G71L Dual SIM Smartphone, Smartphone
94430 IkonPRO CCT Massive Lighting Instruction manual IkonPRO CCT 94430, 94431 94431 94430 Thank you…
SD-100 Series 100W Single Output DC DC Converter 100W Single Output DC-DC Converter SD-100 series…
ADD-LTPCF VESA Compatible Laptop and Other Device Holder with Built-in Cooling Fan VESA Compatible Laptop…