Document

BISSELL-LOGO

BISSELL 2066 SERIES PROHEAT 2X REVOLUTION PET PRO

BISSELL-2066-SERIES-PROHEAT-2X-REVOLUTION-PET-PRO-PRODUCT-IMAGE

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR DEEP CLEANER.
When using an electrical appliance, basic precautions should be observed, including the following:

WARNING
To reduce the risk of fire, electric shock, or injury:

  • Unplug from electrical socket when not in use and before cleaning, maintaining or servicing the appliance.
  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision.
  • Children should be supervised to ensure that they do not play with the appliance.
  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • Do not run appliance over cord.
  • Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts of the appliance and its accessories.
  • Use only the type and amount of liquids specified under the Operations section of this guide.
  • Do not leave appliance when plugged in.
  • Always connect to a properly earthed electrical socket. Do not modify earthed plug.
  • Do not allow to be used as a toy.
  • Use only as described in the user guide.
  • Use only manufacturer’s recommended attachments.
  • Do not use with damaged cord or plug.
  • Do not immerse in water or liquid. Use only on surfaces moistened by the cleaning process.
  • If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water; do not attempt to operate it and have it repaired at an authorized service center.
  • Liquid must not be directed towards equipment containing electrical components.
  • Do not pull or carry by cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners.
  • Keep cord away from heated surfaces.
  • Do not unplug by pulling on cord.
  • To unplug, grasp the plug, not the cord.
  • Do not handle plug or appliance with wet hands.
  • Do not put any object into openings.
  • Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
  • Turn off all controls before unplugging.
  • Use extra care when cleaning on stairs.
  • Do not use to pick up flammable or combustible liquids, such as petrol, or use in areas where they may be present.
  • Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.)
  • Do not use appliance in an enclosed space filled with vapors given off by oil base paint, some mothproofing substances, flammable dust, or other explosive or toxic vapors.
  • Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.
  • Keep appliance on a level surface.
  • Do not carry appliance while in use.
  • Unplug before attaching the TurboBrush™ tool.
  • Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
  • If your appliance is fitted with a nonreworkable BS 1363 plug it must not be used unless a 13 amp (ASTA approved to BS 1362) fuse is fitted in the carrier contained in the plug. Spares may be obtained from your BISSELL supplier. If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard should it be inserted into a mains socket.
  • Do not expose to rain. Store indoors.
  • Always install float before any wet pick-up operation.
  • Plastic film can be dangerous. To avoid danger of suffocation, keep away from children.
  • Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained

SAVE THESE INSTRUCTIONS
FOR OPERATION ON A 220-240 VOLT A.C. 50-60 HZ POWER SUPPLY ONLY.
This model is for household use only.

  • Caution.
  • Refer to instruction manual.
  • This symbol means to recycle.
  • Recycling to help the environment. Dispose of packaging at the applicable recycling collection point. This symbol means to recycle. Do not mix packaging with general household waste.
  • This symbol on the product and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product to designated collection points. Please contact your local authority for further details of your nearest designated collection point.
Assembly

WARNING: Do not plug in your deep cleaner until you are familiar with all instructions and operating procedures.

Your deep cleaner comes in four easy-to-assemble components and an accessory bag.

  • Base
  • Upper Handle
  • Clean Water Tank
  • Carry Handle

A Phillips screwdriver is required for Assembly in Step 3.

First, insert the (aluminum) Upper Handle at the top of the base until you hear a “click”.
Do NOT put the clean tank on the machine until Step 5.BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-01Next, align the carry handle with the slots on either side of the base (behind the power switch and cleaning mode switch). The carry handle will “click” into place.BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-02Use a Philips screwdriver to secure the screw (found taped to upper handle) into the carry handle. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-03Wrap the cord around the carry handle and Quick Release™ Cord Wrap hook.BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-04Side View
At the bottom of the upper handle, align the clean water tank with the grooves and slide the tank into place.BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-5

Thanks for buying a BISSELL carpet cleaner!
We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your carpet cleaner works as well as it does today for years to come, so this guide has tips on using (pages 7-12), maintaining (pages 13-17), and if there’s a problem, troubleshooting (page 18).
In just a few simple assembly steps, you’ll be ready to deep clean. Flip to the Quick Start Guide on page 3 and let’s get started!

Package Contents

BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-06

  1. Upper Handle
  2. 1 Screw attached to
    Upper Handle
  3. Base with Dirty Water Tank
  4. Clean Water Tank
  5. Carry Handle
  6. Trial Size BISSELL Formulas (3)
  7. Accessory bag & hose
  8. Tough Stain Tool
  9. 2-in-1 Pet Upholstery Tool
  10. Nozzle Clean Out Tool

NOTE: Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the carton top flap.

Getting to Know Your Deep Cleaner

BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-07Cleaning Formulas

WARNING: To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner.

Keep plenty of genuine BISSELL formula on hand so you can clean whenever it fits your schedule.

Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning formulas may harm the machine and may void the guarantee.

PRETREAT
PRE TREAT SPOTS AND STAINS TO IMPROVE CARPET CLEANING PERFORMANCE
BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-08 BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-08
Stain PreTreat Pet Stain PreTreat
Pretreat to Pretreat to help
penetrate remove tough
and loosen pet stains
tough stains and odors
2X* CONCENTRATED CLEANING FORMULAS
WASH & PROTECT WASH & REMOVE WASH & REFRESH WASH & SHINE
BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-09
BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-10 BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-10 BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-10 BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-10 BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-10 BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-10 BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-11
Professional Stain & Odour Pet Stain & Odour Stain & Odour + Oxy Febreze™ Blossom & Breeze Febreze™ Cotton Fresh Natural Orange Hard Floor Cleaner
Professional strength to remove extra tough stains and odours Includes Scotchgard™ Protector Removes tough pet stains and contains patented odour removal technology Includes Scotchgard™ Protector Removes tough stains and odours Includes Scotchgard™ Protector Permanently removes tough stains like red wine, coffee, tea, cola and grape juice with Active Oxygen Technology Powerful cleaning with a refreshing spring scent Powerful cleaning with a refreshing clean scene Powerful cleaning with a refreshing natural orange scent Removes dirt and grime from sealed hard floor surfaces; leaves a natural shine

ONLY BISSELL Wash & Protect formulas protect from future stains with Scotchgard™ Protector. Scotchgard™ is a trademark of 3M®.
*60 mL of 2X concentrated formula is equivalent to 120 mL of non-concentrated formula.

Tips Before Carpet Cleaning

  • If cleaning an entire room, consider moving your furniture to another area.
  • Remove loose dirt and impediments.
  • Pre-treat stains with BISSELL PreTreat to improve performance on tough stains and ground-in dirt.
Filling Your Clean Water Tank:
2X Concentrated Formula

BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-08

The clean water tank is at the top of the machine.

BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-11Lift the clean water tank straight up to remove from the machine. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-12Unscrew the cap from the clean water tank. Add hot tap water to the water fill line. Next, reference the chart below for formula amounts to add to the tank. Twist cap back into place. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-13At the bottom of the upper handle, align the clean water tank with the grooves and slide the tank into place.

FORMULA FILLING INSTRUCTIONS DEEP CLEAN MODE EXPRESS CLEAN MODE
BISSELL 2X

Concentrated Formulas

Fill water to the Water Fill Line, then add 74 mL of formula. Fill water to the Water Fill Line, then add 37 mL of formula.

NOTE: Fill with hot (140°F/60°C MAX) tap water and add the appropriate BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. Do not substitute BISSELL Cleaning Formula with other household cleaning products.
NOTICE: Do not over wet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature belt failure.

Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and may void the guarantee.

Cleaning Your Carpet

BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-14Plug into a properly earthed outlet. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-15Select cleaning mode:
Deep Clean
Delivers a deep clean to your carpet.
Express Clean
Provides a lighter clean with about 1 hour of dry time.BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-16Press the power button to turn the machine on.
To recline your machine for use, press the recline pedal with your foot.BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-17

 

Deep Clean Mode:

  1. Press the spray trigger to apply solution while making 2 slow wet passes – 1 forward and 1 back.
  2. Release the trigger.
  3. Make 2 slow dry passes – 1 forward and 1 back, to suck up the dirty solution. (Do not hold down the trigger for this step.)

NOTE: For best cleaning performance, clean with your machine in Deep Clean Mode.

Express Clean Mode:

  1. Press the spray trigger to apply solution while making 2 wet passes – 1 for-ward and 1 back.
  2. Release the trigger.
  3. Make 2 dry passes – 1 forward, 1 back to suck up the dirty solution. (Do not hold down the trigger for this step.)

NOTE: In Express Clean Mode, the dirty tank will not get as full as when cleaning with Deep Clean Mode.
NOTICE: To prevent damage to Berber carpets, avoid repeated strokes in the same area.

Bare Floor Cleaning*

*Select models only

WARNING:  To reduce the risk of fire and electric shock when cleaning a hard floor, the BISSELL bare floor tool must be used and is only to be used with BISSELL Wash & Shine Hard Floor Cleaner formula intended for use with this appliance.

NOTE: The bare floor tool that is compatible with the ProHeat 2X Revolution may not be included. It is available for purchase by contacting our team by phone or visting us online at BISSELL.com.

BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-18With the machine unplugged, attach the bare floor tool to the bottom of the machine by lining the tool to the edge of the nozzle. Rotate down until it clicks into place.
Follow filling instructions on page 10 or 11 and switch cleaning mode to Express Clean. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-19Plug into a properly grounded outlet and press the power button.
Clean by pressing the trigger for 1 wet pass forward, 1 wet pass back, and then release the trigger and make 1 dry pass forward, 1 dry pass back. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-20When finished, unplug the machine and remove the bare floor tool by rotating the tool up to unhook from the nozzle.
Rinse and let dry before storing. Refer to page 13 for emptying the dirty water tank. Refer to page 14 for cleaning your machine before storing.

Area Rug Cleaning

Important! Please check manufacturer’s tag before cleaning area rugs for any specialized cleaning instructions. We do not recommend deep cleaning delicate, silk, wool, antique or area rugs without a manufacturer’s tag.

Regularly clean your high-traffic area rugs in Express Clean Mode:

  • Check the manufacturer’s tag.
  • Select Express Clean Mode.
  • When cleaning area rugs, place the rug on a sealed surface to test for colorfastness in an inconspicuous area. Your cleaner should not be used on unsealed surfaces.
  • Important: Keep the foot of the deep cleaner perpendicular to the rug’s edge with each cleaning pass to prevent damage.
Cleaning with Hose & Tool

BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-21Lift the accessory hose door on top of foot on the front of the machine. The door flips toward the machine to open. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-22Insert the hose and snap into place. Be sure the colored hose release clip is facing out, away from machine. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-23Attach the tool to the end of the hose. (Tools may vary by model.) Press the power button to turn machine on.

  • Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. Brushroll continues to rotate when in the upright position.
  • Brushroll continues to turn while product is turned on and handle is in upright position. To avoid damage to carpet, rugs, furniture and flooring, avoid tipping cleaner or setting it on furniture, fringed area rugs, or carpeted stairs during tool use.
  • The brushroll remains on while cleaning with the hose and tool. Do not allow cleaner to sit in one location for an extended period of time, as damage to floor can result. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-24

Press the spray trigger button to spray the soiled area, then slowly move tool back and forth over the area.
Release the trigger to suck up the dirty solution. Work in small sections until the area is clean.
When finished cleaning, turn the machine on to suction up warm clean water to rinse the inside of the hose and tool. Detach the hose and tool and close the accessory hose door. Let the hose and tool air dry before storing.

NOTE: If using the Deep Reach Tool (select models only) or Pet Stain Tool (select models only) be sure the needles of the tool are pressed down into the carpet so the spray gets into the carpet fibers.

Cleaning with CleanShot®

BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-25Press the CleanShot® button with your foot. The window of the button will be green and show an “I” symbol when it is on.

BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-26Spray will continue until you turn it off. To turn CleanShot® off, press the button with your foot. The window of the button will be red and show an “O” symbol when it is off.

Completely cover the stain with CleanShot® spray. Allow the stain to soak. To extract, maneuver the foot of the machine over the stain to brush and remove.

NEW! 2-in-1 Pet Upholstery Tool

*Make sure your clean tank has water & formula to use the tool in wet mode..

BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-27Follow hose plug-in instructions from steps 1 & 2 on page 14.

BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-28Attach the tool and select dry mode to first pick up dry debris and pet hair. The suction will be at the lower part of the tool, near the dry cup.
DRY MODE NOTE: Use a “raking” motion to clean. Start with the tool farthest away and rake in small increments as you bring the tool toward you. The rubber nubs will help attract hair to the suction channel. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-29BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-30WET MODE NOTE: Start from the area farthest away. Hold the trigger down, and pull the tool toward you. Keep the tool in contact with the surface as you pull. You will see extraction through the nozzle.

Empty Dirty Water Tank

WARNING: To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.

BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-31BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-32For quick empty:
Pull the rubber tab and tilt to pour.
(Located at the corner of the top of the tank.)
When closing the rubber tab, make sure all edges are sealed tight.
For final clean and rinse: Unscrew the ring at the bottom of tank.
Gently remove the float stack, rinse, and clean.
Once clean, return float stack into the tank by lining up the arrows so they point at each other. This is the only way the float stack will fit into the tank.
With the arrows aligned, the float stack should lock into place.
Return the ring and twist to lock. Water may leak if the ring is not fully tightened. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-33BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-34

Cleaning Machine After Use

WARNING:  To reduce the risk of  electric shock, turn power switch off and disconnect plug from  electrical outlet before performing maintenance or troubleshooting checks.

BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-35First, fill the clean water tank with warm tap water and then empty it all to rinse. Then fill again with warm tap water and return the tank to the machine.
Twist cap back on tightly. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-36To flush and rinse the machine:
Turn the machine on and press the trigger for 15 seconds while making back and forth passes on a section of carpet.
Finally, release the trigger and extract the water.

See page 13 to clean the dirty tank from the water that was just extracted. Empty the clean water tank and let dry before storing.
Wipe your machine’s exterior with a soft cloth.
Store machine in a protected dry area.

NOTICE: To reduce the risk of a leaking condition, do not store unit where freezing may occur. Damage to internal components may result.

Brush Roll & Nozzle Care

WARNING: To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.

NOTE: Be sure to clean the brush rolls and nozzle before storing your machine. Follow these steps if your nozzle becomes clogged with hair or debris.

BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-37BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-38BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-39When finished, return the brush roll cover by pushing it straight down. You will hear a click from each “push” button when the cover is pushed down into place. Ensure the nozzle wire on the front of the brush roll cover has also snapped back into place. Line up the nozzle from the edge near the floor and rotate to snap back into place.

Replacing Belts & Brush Rolls

WARNING: To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.

What you will need: 1 Phillips screwdriver & 1 flathead screwdriver

BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-40While the machine is upright, unplug the machine and remove both tanks. Remove the nozzle and brush chamber cover (see steps in Brush Roll & Nozzle Care). Press the recline pedal and lay the machine on its back. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-41BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-42BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-43Turn the machine on its side and use a Philips screwdriver to remove the screw just underneath the wheel. Slide the wheel down to remove.

NOTE: To replace brush rolls, remove them from the metal posts and replace. Make sure the metal post goes completely through the end of the brush roll. The brush roll bristles should be aligned in a ‘V’ pattern as pictured. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-44Align brush rolls with belt at other end. To ensure alignment, hold the end of one brush roll and twist. The other brush roll rotates with it. Check that washers are in place. Reassemble the belt and end cap, securing with screws you removed. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-45If the flat belt is broken, gently remove the belt. If it needs replacing for any reason, the gear belt should already be removed before removing the flat belt. Rotate the machine back to its side. Feed the new flat belt through the opening so that it wraps around the red pulley. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-46Keep it wrapped on the red pulley and adjust the machine so it is laying on it’s back again. Use your thumb to stretch the flat belt back to wrap around the metal axle. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-47Resecure the Belt/Brush Access Plate:
Slide the wheel up back into the slot and secure with the screw that was removed. BISSELL-2066-SERIES-PROHEAT-2X REVOLUTION-PET PRO-48Snap the Belt Access Door back down into place.

NOTE: See Step 7 on page 15 for how to put the brush roll cover and nozzle back in place.

Troubleshooting

WARNING: To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.

Problem Possible causes Remedies
Reduced or No Spray Through Foot of Machine Clean water tank may be empty Refill tank
Clean water tank may not be seated completely Turn power OFF; remove and reseat tank
No spray through hose & tool The hose to your machine is not primed or may have lost prime
  1.  With the machine off and unplugged, remove the nozzle from the foot. Place a ball point pen in the black cylinder next to the screw. When water bubbles up, remove the pen. Reassemble the nozzle and hose
  2. Hold end of hose below water level in tank to prime
  3. With the clean tank full of water, the machine OFF and RECLINED, press the CleanShot® button ON and wait for the CleanShot® to drain for a few seconds; This will re-prime the machine
Clean Water tank may be empty Refill the Clean Water Tank
Clean Tank may not be seated properly Turn power OFF; Remove and reseat the clean water tank
No Spray Through CleanShot® Clean Water tank may be empty Refill the Clean Water Tank
Clean Tank may not be seated properly Turn power OFF; Remove and reseat the clean water tank
The machine is not reclined Press the Recline pedal and bring the handle down to recline the machine
Pump may have lost prime With the machine off and unplugged, remove the nozzle from the foot. Place a ball point pen in the black cylinder next to the screw; When water bubbles up, remove the pen; Reassemble the nozzle before cleaning again
CleanShot® Continues Spray When Machine is Off CleanShot® button is not in the “OFF” position Press the CleanShot® button to turn it off. The button window will show the color red and a “O” symbol when it is in the off position
Loss of suction power Dirty tank may not be seated properly Pick up the dirty tank and reseat so it fits in the unit
Dirty tank has picked up maximum amount of dirty water and has reached full line Empty dirty tank
Rubber tab on dirty water tank is not sealed tight Check the rubber tab on the dirty water tank and press firmly on all edges to secure it tightly (see step 4 on page 15 for detail)
Accessory hose door may not be closed tightly in place Check the accessory hose door and make sure it is closed tightly – it should be locked into place
Nozzle may be clogged from pet hair or debris Use the nozzle clean out tool and follow steps on page 15 for “Cleaning Nozzle”
Brush roll cover not fully snapped into place Remove the nozzle and brush roll cover; Follow step 7 from page 15 and make sure you hear both buttons click into place
 

No power

Cleaning mode switch mistaken for power button Press the red power button on the left side of the machine to turn the machine on
Outlet may not be active Try plugging in a different device that uses a grounded outlet to test for power from the outlet
Leaking tank Tank may have been over-filled
  1.   Make sure your tank has the water and formula in it that you’ve prepared
  2. With the cap twisted ON tightly, hold your tank at an angle, over a sink or drain, so any extra water can pour out of the space
  3. Wipe the tank dry with a cloth
Water may be caught in space between the tank and the tank’s handle

Consumer Guarantee
This Guarantee only applies outside of the USA and Canada. It is provided by BISSELL International Trading Company BV (“BISSELL”).

This Guarantee is provided by BISSELL. It gives you specific rights. It is offered as an additional benefit to your rights under law. You also have other rights under law which may vary from country to country. You can find out about your legal rights and remedies by contacting your local consumer advice service. Nothing in this Guarantee will replace or lessen any of your legal rights or remedies. If you need additional instruction regarding this Guarantee or have questions regarding what it may cover, please contact BISSELL Consumer Care or contact your local distributor.

This Guarantee is given to the original purchaser of the product from new and is not transferable. You must be able to evidence the date of purchase in order to claim under this Guarantee.

Limited 6 Year Guarantee
(from the date of purchase by original purchaser)
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, BISSELL will repair or replace (with new or remanufactured components or products), at BISSELL’s option, free of charge, any defective or malfunctioning part or product.
BISSELL recommends that the original packaging and evidence
of the date of purchase be kept for the duration of the Guarantee period in case the need arises within the period to claim on the Guarantee. Keeping the original packaging will assist with any necessary re-packaging and transportation but is not a condition of the Guarantee.
If for your product is replaced by BISSELL under this Guarantee, the new item will benefit from the remainder of the term of this Guarantee (calculated from the date of the original purchase). The period of this Guarantee shall not be extended whether or not your product is repaired or replaced.

EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE GUARANTEE
This Guarantee applies to products used for personal domestic use and not commercial or hire purposes. Consumable components such as filters, belts and mop pads, which must be replaced or serviced by the user from time to time, are not covered by this Guarantee.
This Guarantee does not apply to any defect arising from fair wear and tear. Damage or malfunction caused by the user or any third party whether as a result of accident, negligence, abuse, neglect, or any other use not in accordance with the User Guide is not covered by this Guarantee.

An unauthorized repair (or attempted repair) may void this Guarantee whether or not damage has been caused by that repair/attempt.
Removing or tampering with the Product Rating Label on the product or rendering it illegible will void this Guarantee.

SAVE AS SET OUT BELOW BISSELL AND ITS DISTRIBUTORS ARE NOT LIABLE FOR ANY LOSS OR DAMAGE THAT IS NOT FORESEEABLE
OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY
NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT INCLUDING WITHOUT LIMITATION LOSS OF PROFIT, LOSS OF BUSINESS, BUSINESS INTERRUPTION, LOSS OF OPPORTUNITY, DISTRESS, INCONVENIENCE OR DISAPPOINTMENT. SAVE AS SET OUT BELOW BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
BISSELL DOES NOT EXCLUDE OR LIMIT IN ANY WAY ITS LIABILITY FOR (A) DEATH OR PERSONAL INJURY CAUSED BY OUR NEGLIGENCE OR THE NEGLIGENCE OF OUR EMPLOYEES, AGENTS OR SUBCONTRACTORS; (B) FRAUD OR FRAUDULENT MISREPRESENTATION; (C) OR FOR ANY OTHER MATTER WHICH CANNOT BE EXCLUDED OR LIMITED UNDER LAW.

Consumer Care
If your BISSELL product should require service or to claim under our limited guarantee, please contact us as follows:
Website:

www.bisselldirect.co.uk

Email:
[email protected]
Telephone:
0344-888-6644
Write:
BISSELL Homecare (Overseas) Inc. Ground Floor
226 Berwick Avenue
Slough, Berkshire, SL1 4QT
United Kingdom
Spares are available for purchase.
To purchase visit www.4bissell.co.uk

Visit the BISSELL website: www.bisselldirect.co.uk
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: _____________ Please record your Purchase Date: _____________

NOTE: Please keep your original sales receipt. It provides proof of the date of purchase in the event of a Guarantee claim. See Guarantee for details.

©2017 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China Part Number 161-2614 06/17 RevD Visit our website at: www.BISSELL.com Scotchgard is a trademark of 3M

Documents / Resources

BISSELL 2066 SERIES PROHEAT 2X REVOLUTION PET PRO [pdf] User Guide
2066 SERIES PROHEAT 2X REVOLUTION PET PRO, 2066 SERIES, PROHEAT 2X REVOLUTION PET PRO, REVOLUTION PET PRO, PET PRO

Leave a comment

Your email address will not be published.