SPA-RAIL48 Desoto Ceiling Loudspeaker
Installation Guide
SPA-RAIL48 Desono Ceiling Loudspeaker
SPA-RAIL48 (2 sets in each kit)
PRELIMINARY
DesonoTM Ceiling Loudspeaker Accessories 48″ Tile Rails with Adapters
Installation Guide
Biamp offers 48″ tile rails for Desoto ceiling loudspeakers. CM and C-IC6 loudspeakers utilize adapters with the mounting rails included with the loudspeakers. Please refer to the appropriate Installation and Operation guide for additional information on installation methods.
Note: Loudspeakers do not need to be placed in the center of the large ceiling tile if there are other elements above the ceiling or in the tile.
D Series Installation
- Place 48″ tile rails with flat sides in (as shown) the appropriate distance apart and install the C-Ring. Install the ceiling tile and loudspeaker per regular installation practice. 24″ rails are not needed.
CM Series Installation
- Push a gasket onto the edge of one side of each tab on both ends of the 24″ tile rail. Note: These gasketed ends sit against the 48″ rails and prevent any chattering during loudspeaker operation.
- Place 48″ tile rails with a flat side toward the opening the appropriate distance apart and place the 24″ rails on the flat of the larger rail with gaskets against the 48″ rail’s vertical wall (as shown).
- Push an adapter onto the rails close to each end of the shorter rails capturing the vertical walls of each rail. The fit will be tight (see detail for placement).
- Place a tile bridge (included with the CM models) onto each pair of adapters as shown, and align around the opening in the ceiling tile.
DesonoTM Ceiling Loudspeaker Accessories 48″ Tile Rails with Adapters - With the dog ears rotated in, install the loudspeaker in the ceiling tile. Rotate the dog ears out and down to fit into the channels in the 24″ tile rails. Do not deform the ceiling by tightening the dog’s ears too much.
C-IC6 Installation
- Place 48″ tile rails with flat sides in (as shown) the appropriate distance apart and place the 24″ rails on the flat of the larger rail. (Shown with tile in place)
- Push an adapter onto the rails at each end of the shorter rails capturing the vertical walls of each rail. The fit will be tight (see circle detail).
- Install the C-ring onto the 24″ rails; center on the opening. Secure the C-ring with the provided screws.
- With the dog ears rotated in, insert the loudspeaker up through the C-ring and ceiling.
- Rotate the dog ears out and down to fit onto the C-ring. Do not deform the ceiling by tightening the dog ears too much.
DesonoTM Ceiling Loudspeaker Accessories 48″ Tile Rails with Adapters
SPECIFICATIONS
H x W x D: 37 x 26 x 1248 mm[1.46″ x 1.02″ x 49.12″]
Material / Finish: Zinc-plated 1.2mm steel (tile rails), Black ABS (adapter), black rubber (gasket)
Quantity per kit: 2 sets of rails, adapters, gaskets
Unit Weight: 3.0 lbs (1.4 kg) pair
Scan this QR code and navigate to your loudspeaker model to download the appropriate installation guide
TECHNICAL DRAWING
COMPLIANCE INFORMATION
Conforms to UL2043 Standard
SUITABLE FOR USE IN AIR HANDLING SPACES
PENDING
CONTACT US
Email: support@biamp.com
Web: support.biamp.com
Warranty: biamp.com/legal/warranty-information
A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA
W: www.biamp.com
585.0238 15NOV2021
Documents / Resources
 | biamp SPA-RAIL48 Desono Ceiling Loudspeaker [pdf] Installation Guide SPA-RAIL48, Desono Ceiling Loudspeaker, SPA-RAIL48 Desono Ceiling Loudspeaker, Ceiling Loudspeaker, Loudspeaker |
