Better Music Builder DFS-710 10 Inch 2-Way Full Range Speaker Owner's Manual

WARNING: This product must be installed by professionals. When using hanging brackets or rigging other than those supplied with the product, please ensure they comply with the local safety codes.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
WARNING: To reduce the risk of electric shock, only qualified professionals can remove the cover of this system.

CAUTION
RISK OF ELECTRICAL SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

The lighting flash & arrowhead symbol within an equilateral triangle is intended to alert you that this part is not dielectric, and may cause the hazard of electric shock

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and servicing instructions.

System Features

2-Way full range passive loudspeaker
1 x 10” high power low frequency transducer
1 x compression driver with 1.4” titanium diaphragm
2 x NL4 connector
Dynamic Fusion Technology™ (DFT)
Enclosure constructed of 15 mm plywood with durable painting
100° x 90° wide dispersion can set better coverage
Frequency response 55Hz~18kHz
Sensitivity 97dB
Computer stimulation design technology ensures good frequency response and excellent phase feature
Integral 35mm pole mount receptacle for stand or vertical installation.

Description

DFS-710 10” 2-Way full range passive loudspeaker. The system comprises of 1×10” high-power low frequency transducer and 1×1.4” diaphragm compression high frequency driver.
Big dynamic and high sensitivity, clear & penetrating at high frequency, good bass sound.

Applications

Medium conference room
Multifunctional halls
Live performance

NL4 Connection

Connect
Disconnect

Technical Specification

System: Passive full range wooden speaker with painting
Tweeter: 1 x 1.4” diaphragm compression driver
Woofer: 1 x 10” high power low frequency transducer
Frequency response (-3dB): 55Hz~18kHz
Sensitivity (1W@1m): 97dB
Rated Impedance: 8 Ohms
Maximum SPL: 120 dB (126 dB peak)
Power Rating: 250W (RMS) 1000W (PEAK)
Dispersion (H x V): 100°× 90° (H × V)
Construction: 15 mm, plywood
Installation: M8 hanging point
Connector: 2 x NL4 Speakon
Cabinet Dimensions (W×H×D): 11.8×20.5×13.4 in 30×52.1×34 cm
Net Weight: 28.7 Lbs / 13 Kg

System Connection Reference

Attention: The impedance of connected speaker must match the impedance of amplifier output.
Attention: Make sure the polarity of speaker and amplifier correctly.

Speaker Testing Method

Frequency Response
Use Pink noise to test the speaker in the anechoic chamber, adjust the level to make the speaker work at its rated impedance and set the output power at 1W, then test the frequency response lm away from the speaker.
Sensitivity
Use full range Pink noise which has been modified using an EQ curve to test the speaker in the anechoic chamber, increasing the signal to make the speaker work at its rated impedance and set the power output at 1W, then test the sensitivity 1m away from the speaker.
MAX.SPL
Use full range Pink noise which has been modified using an EQ curve to test the speaker in the anechoic chamber, increase the signal to make the speaker work at its maximum power output level, then test the SPL1 m away from the speaker.
Rated Power
Use Pink noise to the IEC#268-5 standard to test the speaker, increase the signal for a continuous period of100 hours, the rated power is the power when the speaker will show no visible or measurable damage.

Frequency response curve & Impedance curve

Documents / Resources

Better Music Builder DFS-710 10 Inch 2-Way Full Range Speaker [pdf] Owner's Manual
DFS-710 10 Inch 2-Way Full Range Speaker, DFS-710, 10 Inch 2-Way Full Range Speaker, 2-Way Full Range Speaker, Full Range Speaker, Range Speaker, Speaker

References

User Manual

SAFETY INSTRUCTIONS