mijashy Electric Bidet Toilet Seat Model Y101 User Manual

1. Важная інфармацыя па бяспецы

Please read all instructions carefully before installation and use. Retain this manual for future reference. Failure to follow these instructions could result in electric shock, fire, or other injuries.

• Электрабяспека: This product must be connected to a properly grounded outlet. Do not use with extension cords. Ensure the power outlet is protected by a Ground Fault Circuit Interrupter (GFCI).
• Бяспека вады: Do not immerse the product in water. Ensure all water connections are secure to prevent leaks. Turn off the water supply before performing any maintenance.
• Children and Individuals with Reduced Capabilities: Supervise children to ensure they do not play with the appliance. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Уборка: Адключыце электрычнасць перад чысткай. Выкарыстоўвайце толькі мяккія, неабразіўныя ачышчальнікі.

2. Змесціва ўпакоўкі

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:

• 1x mijashy Electric Bidet Toilet Seat
• 1x бесправадны пульт дыстанцыйнага кіравання
• 1x Інструкцыя па эксплуатацыі
• 1x мантажная пласціна
• 2x Шрубы
• 2 сталёвыя дыскі
• 2x Anchoring Rubber
• 1x Three-Way Valve (7/8" to 1/2" to 7/8")
• 1x PE Pipe (Water Hose)

Малюнак 2.1: Уключаныя кампаненты

3. Настройка і ўстаноўка

This bidet toilet seat is designed for easy DIY installation. Ensure you have a standard electrical outlet (GFCI protected) and access to your toilet's water supply line.

3.1 Праверка сумяшчальнасці

This model is designed for elongated toilets. Please measure your toilet bowl to ensure compatibility. The distance from the toilet seat mounting holes to the front edge of the bowl should be approximately 18" - 19.5".

Figure 3.1: Elongated Toilet Compatibility

3.2 Этапы ўстаноўкі

1. Remove Current Toilet Seat: Lift the hinge covers and unscrew the bolts holding your existing toilet seat in place. Remove the seat and lid.
2. Усталяваць мантажную пласціну: Place the mounting plate over the toilet bowl holes. Insert the screws through the steel discs and anchoring rubber, then tighten them to secure the mounting plate.
3. Slide Bidet Seat: Carefully slide the bidet toilet seat onto the mounting plate until it clicks into place. A quick-release button allows for easy removal if needed.
4. Падлучыце Т-вобразны клапан: Turn off the water supply to your toilet. Flush the toilet to drain the tank. Disconnect the existing water supply hose from the toilet tank's fill valve. Install the provided T-valve onto the fill valve.
5. Падключыце шлангі: Connect the original water supply hose to the bottom of the T-valve. Connect one end of the provided PE pipe (bidet hose) to the side of the T-valve and the other end to the water inlet on the bidet seat.
6. Аднаўленне вады і электрычнасці: Slowly turn on the water supply. Check for leaks. Plug the bidet seat's power cord into a GFCI-protected electrical outlet.

Figure 3.2: Fast and Easy Installation Steps

4. Інструкцыя па эксплуатацыі

The mijashy Electric Bidet Toilet Seat offers various functions controlled by the wireless remote. Ensure the remote has fresh batteries and is within range of the bidet seat.

4.1 Пульт дыстанцыйнага кіраванняview

Figure 4.1: Wireless Remote Control Functions

4.2 Асноўныя функцыі

• Задняя мыйка: Актывуе функцыю задняй прамыўкі.
• Bidet Wash (Front Wash): Актывуе функцыю жаночай мыцця.
• Stop: Stops any active wash or drying cycle.
• Сушка: Актывуе асушвальнік цёплым паветрам.
• Магутнасць: Уключае або выключае прыладу.

4.3 Рэгуляваныя параметры

• Тэмпература вады: Use the 'Water Temp' button to cycle through adjustable warm water temperature settings (e.g., Room Temperature, 93°F, 98°F, 104°F).
• Тэмпература сядзення: Use the 'Seat Temp' button to adjust the heated seat temperature through multiple levels.
• Тэмпература сушкі: Use the 'Drying Temp' button to adjust the warm air dryer temperature through multiple levels.
• Water Pressure (Strength+/-): Use 'Strength+' and 'Strength-' buttons to increase or decrease water pressure during a wash cycle.
• Nozzle Position (Forward/Backward): Adjust the nozzle position for optimal cleaning using the 'Forward' and 'Backward' buttons during a wash cycle.

4.4 Дадатковыя магчымасці

• Некалькі рэжымаў мыцця: In addition to standard front and rear wash, the bidet offers Strong Wash, Pulsating Wash, Soft Wash, and Oscillating Wash for a comprehensive cleaning experience.
• Аўтаматычны рэжым: Initiates a pre-programmed wash and dry cycle.
• Дзіцячы рэжым: Provides a gentler wash and lower pressure suitable for children.
• Святлодыёдны начнік: The built-in nightlight provides illumination for nighttime use. Activate or deactivate using the 'Lighting' button.
• Экарэжым: Reduces energy consumption by lowering water and seat temperatures when not in use.

Figure 4.2: Multiple Wash Modes and Water Temperature Settings

Figure 4.3: Heated Seat and Warm Air Dryer Controls

5. Тэхнічнае абслугоўванне

Regular cleaning and maintenance ensure optimal performance and hygiene of your bidet toilet seat.

5.1 Ачыстка фарсунак

The bidet features a self-cleaning nozzle function. Before and after each use, the nozzle automatically rinses itself with water. For a more thorough cleaning, activate the 'Self-Cleaning Nozzle' function on the remote control.

Figure 5.1: Self-Cleaning Nozzle Feature

5.2 Генеральная ўборка

• Адключыць харчаванне: Always unplug the bidet seat from the electrical outlet before cleaning.
• Знешні выгляд: Працярыце вонкавыя паверхні мяккай, damp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or solvents, as these can damage the finish.
• Seat and Lid: Clean the seat and lid with a soft cloth and mild soap. The soft-close lid can be gently lifted for cleaning underneath.
• Nozzle Tip: If necessary, gently clean the nozzle tip with a soft brush (like a toothbrush) and mild soap. Do not force or bend the nozzle.
• Фільтр: Periodically check the water inlet filter for debris. If clogged, turn off the water supply, disconnect the hose, clean the filter, and reassemble.

6. Выпраўленне непаладак

If you encounter issues with your mijashy Electric Bidet Toilet Seat, refer to the following common problems and solutions:

Калі праблема не знікне пасля спробы гэтых рашэнняў, звярніцеся ў службу падтрымкі кліентаў.

7. Тэхнічныя характарыстыкі

Малюнак 7.1: Памеры вырабу

8. Гарантыя і падтрымка

For warranty information and customer support, please refer to the documentation included with your product or visit the official mijashy webсайт. Захоўвайце чэк аб куплі як пацвярджэнне пакупкі ў выпадку любых гарантыйных прэтэнзій.