1. Уводзіны
Thank you for choosing the FLITI AMS193 Motion Sensor Solar Security Lights. This product is designed to provide efficient and reliable outdoor lighting using solar power, featuring adjustable heads, a sensitive motion sensor, and a durable waterproof design. Please read this manual carefully before installation and use to ensure optimal performance and safety.
2. Інфармацыя па бяспецы
- Ensure the product is installed in a location that receives direct sunlight for at least 6-8 hours daily to ensure proper charging.
- Не разбірайце і не мадыфікуйце выраб. Несанкцыянаваныя мадыфікацыі могуць прывесці да пашкоджанняў і анулявання гарантыі.
- Keep the product away from fire or high temperatures.
- Avoid direct eye exposure to the bright LED light.
- Утылізуйце батарэі і электронныя кампаненты ў адпаведнасці з мясцовымі правіламі.
- This product is IP65 waterproof, suitable for outdoor use in various weather conditions, but avoid submerging it in water.
3. Змесціва ўпакоўкі
Калі ласка, праверце ўпакоўку, каб пераканацца ў наяўнасці ўсіх прадметаў:
- FLITI AMS193 Solar Security Light Unit (x2)
- Мантажны кранштэйны (x2)
- Screws and Wall Plugs (x4 sets)
- Кіраўніцтва карыстальніка (x1)
4. Асаблівасці прадукту
- Супер яркае асвятленне: Equipped with 229 high-quality LED beads, providing up to 2500 lumens of 6500K bright white light.
- Wider Lighting Area: Features 3 independently adjustable lamp heads and a rotatable solar panel, allowing for omnidirectional and multi-angle lighting coverage up to 120 degrees.
- Ultra-Sensitive Motion Sensor: An upgraded infrared digital motion sensor detects movement up to 12 meters (39 feet) within a 120-degree angle, activating the light quickly at night.
- Воданепранікальнасць IP65: Durable construction ensures reliable operation in various outdoor weather conditions, including rain and snow.
- Solar Powered & Wireless: Environmentally friendly and easy to install without the need for electrical wiring.
Image: Key features of the FLITI AMS193 solar light, including sensing distance, operating modes, and waterproof rating.
Image: High-quality LED beads and brightness comparison.
Image: IP65 Waterproof feature in action during rain.
5. Настройка і ўстаноўка
The FLITI AMS193 solar security light is designed for quick and simple wireless installation.
5.1 Выбар месца ўстаноўкі
- Select a location that receives direct sunlight for at least 6-8 hours per day to ensure the solar panel can fully charge the battery.
- Avoid areas under eaves, trees, or other obstructions that might block sunlight or motion sensor detection.
- Mount the light at a height of approximately 2-3 meters (6.5-10 feet) for optimal motion detection and light coverage.
5.2 Этапы мантажу
- Mark the desired installation position on the wall.
- Прасвідруйце дзве адтуліны ў пазначаных месцах.
- Устаўце дзюбелі ў прасвідраваныя адтуліны.
- Замацуйце мантажны кранштэйн да сцяны з дапамогай прадугледжаных шруб.
- Slide the solar light unit onto the mounting bracket until it clicks securely into place.
Image: Installation steps for mounting the solar light.
5.3 Adjusting Light Heads and Solar Panel
The solar panel and the three lamp heads can be rotated independently to customize lighting direction and solar charging angle.
- Adjust the solar panel to face direct sunlight for maximum charging efficiency.
- Angle the three lamp heads to cover your desired lighting areas, such as pathways, doorways, or garden sections.
Image: Flexible rotation design of the solar panel and light heads.
6. Інструкцыя па эксплуатацыі
The FLITI AMS193 features three distinct operating modes, selectable via a button on the back of the unit.
6.1 Першапачатковая зарадка
Before first use, allow the solar light to charge in direct sunlight for at least 8-10 hours to ensure the battery is fully charged.
Image: Solar light charging during the day and activating at night.
6.2 Выбар рэжыму
Press the power button on the back of the unit to cycle through the following modes:
- Mode 1 (Motion Sensor Mode): The light remains off until motion is detected. When motion is sensed, the light turns on at full 2500LM brightness for approximately 20 seconds, then turns off after motion ceases.
- Mode 2 (Dim to Sensor Mode): The light automatically turns on at dusk at a low brightness (approx. 200LM). When motion is detected, it switches to full 2500LM brightness for approximately 20 seconds, then returns to dim brightness after motion ceases. After 6 hours of operation, it automatically switches to Mode 1.
- Mode 3 (Always On Mode): The light automatically turns on at dusk at a medium brightness (approx. 500LM) and stays on continuously. After 4 hours of operation, it automatically switches to Mode 1.
Image: Visual representation of the three operating modes.
7. Тэхнічнае абслугоўванне
Regular maintenance ensures the longevity and optimal performance of your solar lights.
- Чыстая сонечная панэль: Перыядычна працірайце сонечную панэль мяккай анучайamp тканінай, каб выдаліць пыл, бруд або смецце. Чыстая панэль забяспечвае максімальнае паглынанне сонечнага святла і эфектыўнасць зарадкі.
- Замена батарэі: The unit uses rechargeable batteries. If the light's performance significantly decreases over time, the batteries may need replacement. Access the battery compartment by removing the plate cover. Ensure to replace with compatible rechargeable batteries.
- Праверце на наяўнасць пашкоджанняў: Regularly check the light for any physical damage, loose connections, or signs of wear.
8. Выпраўленне непаладак
If you encounter issues with your FLITI AMS193 solar lights, refer to the following common problems and solutions:
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Святло ноччу не ўключаецца. | Недастаткова сонечнага святла для зарадкі. Switch is off or in incorrect mode. Battery depleted or faulty. | Ensure the solar panel receives 6-8 hours of direct sunlight daily. Check the operating mode and ensure it's set correctly (Mode 1, 2, or 3). Allow several days of charging. If issue persists, consider replacing the rechargeable battery. |
| Святло цьмянае або гарыць толькі кароткі час. | Недастатковая зарадка. Брудная сонечная панэль. Старэючая батарэя. | Перанясіце лямпу ў месца з большай колькасцю прамых сонечных прамянёў. Рэгулярна чысціце сонечную панэль. Replace the rechargeable battery if it's old. |
| Motion sensor is not working or too sensitive. | Датчык заблакаваны. Incorrect mounting height/angle. Environmental factors (e.g., strong winds, heat sources). | Пераканайцеся, што лінза датчыка чыстая і не засмечаная. Adjust the mounting height and angle for optimal detection. Consider relocating if false triggers are frequent due to environmental factors. |
Калі гэтыя рашэнні не вырашаюць праблему, звярніцеся ў службу падтрымкі кліентаў.
9. Тэхнічныя характарыстыкі
| Асаблівасць | Спецыфікацыя |
|---|---|
| Нумар мадэлі | AMS193 |
| Марка | ФЛІЦІ |
| Крыніца святла | 229 святлодыёдныя пацеркі |
| Яркасць | Да 2500 люмен |
| Каляровая тэмпература | 6500 кельвінаў (халодны белы) |
| Дыяпазон датчыка руху | Да 12 метраў (39 футаў) |
| Кут датчыка руху | 120 градусаў |
| Воданепранікальнасць | Воданепранікальны IP65 |
| Крыніца харчавання | На сонечных батарэях |
| Матэрыял | Пластыкавыя |
| Тып мацавання | Насценнае мацаванне |
| Number of Light Heads | 3 (рэгуляваны) |
10. Гарантыя і падтрымка
Гарантыя вытворцы: This product comes with a 2-year manufacturer warranty from the date of purchase, covering defects in materials and workmanship under normal use.
Што пакрыта: Дэфекты матэрыялаў і вырабу.
Што не пакрываецца: Damage caused by improper installation, misuse, abuse, accidents, unauthorized repairs or modifications, or normal wear and tear.
Падтрымка кліентаў: For warranty claims, technical assistance, or any questions regarding your FLITI AMS193 solar lights, please contact your retailer or the manufacturer's customer service through the contact information provided at the point of purchase.