Vetroo 850W 80 Plus Gold Full Modular ATX 3.1 Power Supply User Manual

1. Уводзіны

This manual provides essential information for the installation, operation, and maintenance of your new Vetroo 850W 80 Plus Gold Full Modular ATX 3.1 Power Supply. Please read this manual thoroughly before installation and keep it for future reference.

Figure 1: Vetroo 850W Power Supply (White)

2. Асаблівасці прадукту

• Падтрымка PCIe пакалення 5.1: Meets the latest PCIE 5.1 standards for improved performance and efficiency. Backward compatible with both PCIE 4.0 and 3.0.
• Fully ATX 3.1 Compliant: Designed to meet the newest, most advanced power supply standards.
• Premium 105°C Capacitors: High-quality materials and construction ensure stable, low-temperature operation.
• 80 Plus Gold Certified: Meets high standards for quality and efficiency, ensuring reliable performance and energy savings.
• Цалкам модульная канструкцыя: Allows for easy cable management and customization, reducing cable clutter by only installing necessary cables.
• Ціхая праца: Features a 120mm FDB (Fluid Dynamic Bearing) fan for quiet cooling.

Малюнак 2: Закончанаview of Vetroo 850W Power Supply features

3. Змесціва ўпакоўкі

Праверце наяўнасць усіх кампанентаў у камплекце:

• Vetroo 850W Power Supply Unit
• Modular Cable Set (including 24-pin ATX, CPU, PCIe, SATA, Molex, FDD connectors)
• Шнур сілкавання
• Крапежныя шрубы
• Кабельныя сцяжкі
• Storage Bag for Unused Cables

Figure 3: Included Modular Cables

4. Інфармацыя па бяспецы

WARNING: Improper installation or use can result in serious injury or damage to your system.

• Always disconnect the AC power cord from the wall outlet before installing or removing the power supply.
• Не адкрывайце блок харчавання. Высокая гучнасцьtagпрысутнічаюць унутры, нават калі яны адключаныя.
• Ensure all cables are securely plugged into their respective ports. Loose connections can cause damage.
• Use only the modular cables provided with this power supply. Third-party cables may not be compatible and could cause serious damage.
• Install the power supply in a well-ventilated area, away from high humidity and extreme temperatures.

5. Настройка і ўстаноўка

Follow these general steps for installing your power supply. Refer to your PC case and motherboard manuals for specific instructions.

1. Падрыхтуйце сваю сістэму: Пераканайцеся, што ваш камп'ютар выключаны і адключаны ад разеткі.
2. Усталюйце блок харчавання: Secure the power supply unit into the designated bay in your PC case using the provided mounting screws.
3. Падключыце асноўныя кабелі харчавання: Падключыце 24-кантактны кабель ATX да матчынай платы.
4. Падключыце кабелі харчавання працэсара: Падключыце 8-кантактны (4+4) кабель(ы) харчавання працэсара да матчынай платы.
5. Падключэнне кабеляў харчавання PCIe: Connect the necessary PCIe power cables (e.g., 12V-2x6 for PCIe 5.1 GPUs, or 8-pin (6+2) for older GPUs) to your graphics card(s).
   

   Figure 4: Dual PCIe 5.1 Connectors

6. Падключэнне перыферыйных кабеляў: Connect SATA, Molex, and FDD cables to your storage drives and other peripherals as needed.
7. Кабельнае кіраванне: Utilize the fully modular design and included cable ties to route cables neatly, improving airflow and aesthetics.
8. Канчатковая праверка: Double-check all connections to ensure they are secure before closing your PC case.

6. Інструкцыя па эксплуатацыі

After successful installation, you can power on your system.

• Уключэнне: Connect the AC power cord to the power supply and a wall outlet. Flip the main power switch on the power supply to the 'ON' position.
• Рэжым ECO: The power supply features an ECO mode switch. When 'ON', the fan will stop spinning unless the load is above approximately 50% of the rated capacity, ensuring silent operation at low loads. When 'OFF', the fan will spin continuously.

Figure 5: Power Switch and ECO Mode

7. Тэхнічнае абслугоўванне

Правільнае абслугоўванне забяспечвае даўгавечнасць і аптымальную прадукцыйнасць вашай крыніцы харчавання.

• Уборка: Periodically clean the exterior of the power supply and the fan grille to prevent dust buildup, which can impede airflow and cooling. Use compressed air or a soft brush. Ensure the power supply is off and unplugged before cleaning.
• Праца вентылятара: The 120mm Fluid Dynamic Bearing fan is designed for durability and quiet operation. In ECO mode, the fan may not spin at low loads; this is normal.

8. Выпраўленне непаладак

If you encounter issues with your power supply, consider the following:

• Няма харчавання: Ensure the AC power cord is securely connected to both the power supply and the wall outlet. Verify the main power switch on the power supply is in the 'ON' position. Check your wall outlet with another device.
• Нестабільнасць/адключэнні сістэмы: This power supply includes multiple protection features (OVP, OCP, OPP, SCP, UVP, OTP) to safeguard your components. If your system is unstable or shuts down unexpectedly, it could indicate an issue with power delivery or another component. Ensure all power connections are firm.
• Вентылятар не круціцца: If the ECO mode is enabled, the fan will not spin until the power supply reaches approximately 50% load. This is normal operation for quiet performance. If the fan does not spin under heavy load, contact support.
• Незвычайныя шумы: If you hear unusual noises (e.g., coil whine, grinding), power down your system immediately and contact support.

9. Тэхнічныя характарыстыкі

10. Гарантыя і падтрымка

The Vetroo 850W Power Supply comes with a Гарантыя 10 год, ensuring long-term reliability and peace of mind. For technical support, warranty claims, or any questions regarding your product, please visit the official Vetroo webсайт або звярніцеся ў іх аддзел абслугоўвання кліентаў.