Уводзіны
This manual provides essential information for the proper installation, operation, and maintenance of your FLITI Rechargeable Battery Motion Sensor Outdoor Flood Light, Model 1. This device features dual charging capabilities (solar and USB), an 8000mAh battery for extended endurance, and motion-sensing functionality for enhanced security and convenience. Please read these instructions carefully before use to ensure optimal performance and longevity of your product.
Прадукт скончаныview
The FLITI Rechargeable Battery Motion Sensor Outdoor Flood Light is designed for versatile indoor and outdoor illumination. Key features include:
- Падвойная зарадка: Supports both solar power and USB (Type-C) charging for continuous operation, even in low sunlight conditions.
- Батарэя з працяглым тэрмінам службы: Equipped with an 8000mAh battery, providing up to three months of use on a full charge (based on 10 activations per day, 30 seconds each).
- Датчык руху: Detects motion up to 32.8 feet with a 120° sensing angle, activating the light when movement is detected.
- Высокая яркасць: Delivers 3000 lumens of cool white LED light.
- Лёгкая ўстаноўка і выдаленне: У лamp body can be easily detached from its mounting base for convenient USB charging.
- Separate Solar Panel: The solar panel is connected via a 16.4-foot cable, allowing flexible placement for optimal sun exposure.
- Два рэжыму асвятлення: Adaptable lighting behavior for different needs.
Змест пакета
Калі ласка, пераканайцеся, што ўсе кампаненты наяўныя:
- FLITI Rechargeable Battery Motion Sensor Outdoor Flood Light unit
- Solar Panel with 16.4ft cable
- Мантажныя прыналежнасці (шрубы, дзюбелі для сцяны)
- USB Type-C Charging Cable (not explicitly listed but implied by USB charging)
- Кіраўніцтва карыстальніка
Настройка
Выканайце наступныя дзеянні для правільнай ўстаноўкі:
- Выберыце месца: Select a mounting location for the flood light that provides the desired illumination coverage. For the solar panel, choose a spot that receives direct sunlight for several hours daily to ensure efficient charging. The 16.4ft cable allows flexibility in solar panel placement.
- Усталюйце апорную пласціну: Use the provided screws and wall anchors to securely fix the mounting base plate to the wall or desired surface.
- Attach the Light Body: Align the light unit with the mounted base plate and press it firmly until it clicks into place. The light body is designed for easy installation and removal via a bottom plate buckle.
- Устанавіце панэль сонечных батарэй: Secure the solar panel in its chosen location using appropriate mounting hardware. Ensure the cable is routed safely and connected to the light unit.
- Першапачатковая плата: Before first use, it is recommended to fully charge the light. This can be done by exposing the solar panel to direct sunlight for at least two days, or by removing the light body and charging it via the USB Type-C port for approximately 10 hours.
Інструкцыя па эксплуатацыі
The flood light features two distinct operating modes:
- Рэжым 1 (па змаўчанні): The light will only activate when motion is detected in a dark environment (after dusk). It will illuminate at 100% brightness for 30 seconds, then turn off if no further motion is detected.
- Рэжым 2: The light will activate when motion is detected, regardless of ambient light conditions (day or night). It will illuminate at 100% brightness for 30 seconds, then turn off if no further motion is detected. This mode is useful for areas requiring illumination during daylight hours upon motion.
To switch between modes, locate the small button or switch on the light unit, typically near the motion sensor. Pressing this button will cycle through the modes. The light may flash to indicate a successful mode change.
Video: Lighting Mode Description
Video: This video demonstrates how to switch between the two lighting modes and explains their functionality.
Зарадка прылады
The FLITI flood light offers two charging methods:
- Сонечная зарадка: Ensure the solar panel is positioned in an area that receives maximum direct sunlight. The panel will automatically charge the internal battery during the day.
- USB-зарадка: For faster charging or during periods of insufficient sunlight (e.g., winter, prolonged cloudy weather), detach the light body from its mounting base and connect it to a standard USB power adapter using a Type-C cable. A full USB charge takes approximately 10 hours.
Тэхнічнае абслугоўванне
Рэгулярнае тэхнічнае абслугоўванне забяспечвае аптымальную прадукцыйнасць:
- Чыстая сонечная панэль: Перыядычна працірайце сонечную панэль мяккай анучайamp cloth to remove dust, dirt, snow, or debris that may obstruct sunlight and reduce charging efficiency.
- Сыход за батарэяй: If the light is used in an area with consistently low sunlight, especially during winter, consider performing a full USB charge once every few months to maintain battery health and ensure continuous operation.
- Праверце злучэнні: Occasionally check the cable connection between the solar panel and the light unit to ensure it is secure and free from damage.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Light does not turn on or has short endurance. | Insufficient battery charge. Solar panel not receiving enough sunlight. | Ensure solar panel is clean and positioned for maximum direct sunlight. Perform a full USB charge (10 hours). |
| Motion sensor not activating light. | Incorrect operating mode selected. Obstruction blocking sensor. | Verify the light is in the desired operating mode (Mode 1 for night, Mode 2 for day/night). Clear any obstructions from the sensor's path. |
| Святло мігціць або цьмянае. | Нізкі зарад батарэі. | Charge the device fully via solar or USB. |
| Solar panel cable connection issues. | Пашкоджанае або няшчыльнае злучэнне кабеля. | Ensure the cable is securely connected to both the solar panel and the light unit. Inspect for any visible damage to the cable. |
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Марка | ФЛІЦІ |
| Нумар мадэлі | 1 |
| Крыніца харчавання | Сонечная батарэя, зараджаецца праз USB |
| Ёмістасць батарэі | 8000 мАг |
| Яркасць | 3000 люмен |
| Зандзіраванне адлегласці | 32.8 футаў |
| Кут зандзіравання | 120° |
| Даўжыня кабеля сонечнай панэлі | 16.4 футаў |
| Матэрыял | Акрыланітрыл бутадыен стырол |
| Узровень воданепранікальнасці | Waterproof (IP68 implied from A+ content) |
| Светлы колер | Халодны белы |
| Памеры прадмета (Д х Ш х У) | 14 см Д х 10 см Ш х 8 см В |
| Вага прадмета | 0.62 кілаграма |
Інфармацыя аб гарантыі
This FLITI product comes with a 1-гадовая гарантыя вытворцы from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
Падтрымка
For technical assistance, warranty claims, or any questions regarding your FLITI Rechargeable Battery Motion Sensor Outdoor Flood Light, please contact the manufacturer's customer support. Refer to the product packaging or the retailer's webсайт для атрымання канкрэтнай кантактнай інфармацыі.