Уводзіны
Thank you for choosing the Philips LED Lamp with Sensor. This energy-efficient LED lamp provides warm white light (2700K) and features integrated motion and daylight sensors for automatic operation. Designed for convenience and energy saving, this lamp is suitable for various indoor applications. Please read this manual carefully before installation and use to ensure proper function and safety.
Image: The Philips LED Lamp with Sensor, showcasing its standard bulb shape and integrated sensor at the top.
Інфармацыя па бяспецы
Заўсёды выконвайце асноўныя меры бяспекі пры ўсталёўцы або выкарыстанні электрычных вырабаў, каб знізіць рызыку пажару, паражэння электрычным токам і траўмаў.
- Выключэнне: Always switch off the power supply at the main circuit breaker before installing or replacing the lamp.
- Толькі для выкарыстання ў памяшканні: Гэта лamp is designed for indoor use. Do not expose it to water or excessive moisture.
- Правільная база: Пераканайцеся, што lamp holder is compatible with an E27 base.
- тtage: Verify that your electrical system's voltage (100-240V, 50Hz) matches the lampпатрабаванні.
- Не зацямняецца: Гэта лamp is not dimmable. Do not use it with dimmer switches.
- Камфорт для вачэй: While designed for EyeComfort, avoid prolonged direct eye exposure to the light source.
Змест пакета
Пакет змяшчае:
- 1 x Philips LED Lamp with Sensor (Model 929002058731)
Інструкцыя па ўстаноўцы
- Выключыць харчаванне: Before installation, ensure the power to the light fixture is completely turned off at the main circuit breaker.
- Выдаліць старую Лamp: Carefully unscrew and remove the existing lamp from the E27 lamp трымальнік.
- Усталяваць новы Lamp: Screw the Philips LED Lamp with Sensor into the E27 lamp holder until it is finger-tight. Do not overtighten.
- пазіцыянаванне: For optimal sensor performance, ensure the sensor at the top of the lamp is not obstructed by the fixture or other objects. The sensor requires a clear line of sight for motion detection and ambient light measurement.
- Аднавіць сілу: Turn the power back on at the main circuit breaker. The lamp will perform a brief self-test and then be ready for operation.
Image: The Philips LED Lamp with Sensor, illustrating its dimensions (12.2 cm height, 6.25 cm width) for proper fitting.
Інструкцыя па эксплуатацыі
Гэты святлодыёдны ліхтарык Philipsamp is equipped with both a motion sensor and a daylight sensor for automatic control.
- Аўтаматычнае ўключэнне/выключэнне: У лamp will automatically turn on when motion is detected in low light conditions (evening/night). It will turn off after a period of no motion or when sufficient ambient light is present (daytime).
- Датчык дзённага святла: The integrated daylight sensor detects ambient light levels. The lamp will only activate due to motion when the surrounding light is below a certain threshold (e.g., in the evening or a dark room). It will remain off during daylight hours to save energy.
- Датчык руху: The motion sensor detects movement within its detection range. Once motion is detected in low light, the lamp illuminates. If no further motion is detected, the lamp will turn off after approximately 60 seconds.
- Якасць святла: Enjoy a comfortable, warm white light at 2700 Kelvin, designed to meet Philips EyeComfort requirements for reduced eye strain.
Image: Product packaging highlighting the motion and daylight sensor features, indicating automatic on/off functionality.
Sensor Functionality Demonstration
Video: This video demonstrates the functionality of an automatic light sensor system, showing how a light turns on in low ambient light conditions and off when it's bright. This illustrates the principle behind the Philips LED Lamp's integrated sensors.
Тэхнічнае абслугоўванне
The Philips LED Lamp with Sensor requires minimal maintenance.
- Уборка: Перад чысткай пераканайцеся, што харчаванне адключана. Працярыце лamp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the lamp's surface or sensor.
- Плошча датчыка: Keep the sensor area at the top of the lamp clean and free from dust or obstructions to ensure optimal performance.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Lamp не ўключаецца. |
|
|
| Lamp не выключаецца. |
|
|
| Sensor sensitivity seems low. |
|
|
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Марка | Philips |
| Нумар мадэлі | 929002058731 |
| Тып святла | святлодыёд |
| Ватtage | 8 ват |
| Эквівалент лямпы напальвання | 60 ват |
| Lamp База | E27 |
| Светлы колер | Цёплы белы |
| Каляровая тэмпература | 2700 кельвінаў |
| Светлавы струмень | 806 люмен |
| тtage | 100-240 Вольт |
| Частата | 50 герц |
| Асаблівасці | Motion Sensor, Daylight Sensor, Non-Dimmable, EyeComfort |
| Выкарыстанне ў памяшканні/на вуліцы | У памяшканні |
| Працягласць жыцця | 15,000 гадзін |
| Памеры (В x Ш) | 12.2 см х 6.25 см |
| Матэрыял | Пластыкавыя |
Гарантыя і падтрымка
This Philips LED Lamp with Sensor comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Philips lighting website. If you encounter any issues or require technical assistance, please contact Philips customer support.
Інтэрнэт-падтрымка: Наведайце www.philips.com/support каб атрымаць адказы на часта задаваныя пытанні і звязацца з намі.
