Taidacent XKT-R03 DIY Wireless Charging Module Instruction Manual

1. Уводзіны

The Taidacent XKT-R03 is a DIY magnetic induction wireless charging module designed for various electronic projects. It consists of a transmitter module and a receiver module, enabling wireless power transfer for devices requiring a 4.2V power supply. This manual provides essential information for the safe and effective use of the module.

2. Інфармацыя па бяспецы

• Ensure all connections are correct before applying power to prevent damage to the module or connected devices.
• Не перавышайце зададзены ўваходны аб'ёмtage of 5V for the transmitter module.
• Avoid short-circuiting the output terminals of the receiver module.
• Keep the module away from water, moisture, and extreme temperatures.
• This product is intended for DIY and educational purposes. Exercise caution when handling electronic components.
• Do not attempt to modify the module beyond its intended use.

3. Змесціва ўпакоўкі

Звычайна ў камплект уваходзяць наступныя кампаненты:

• 1x Taidacent XKT-R03 Transmitter Module with Coil
• 1x Taidacent XKT-R03 Receiver Module with Coil

Выява 1: Канецview of the Taidacent XKT-R03 wireless charging module, showing the 5V transmitter module and the receiver output module, clearly labeled for connection to a 4.2V Li battery.

4. Тэхнічныя характарыстыкі

5. Інструкцыі па ўсталёўцы

Follow these steps to set up your Taidacent XKT-R03 wireless charging module:

1. Вызначыць кампаненты: Separate the transmitter module (larger coil, typically labeled for 5V input) and the receiver module (smaller coil, typically labeled for 4.2V output). Refer to Image 1 for visual identification.
2. Падключэнне перадатчыка: Connect a 5V DC power source to the input terminals of the transmitter module. Ensure correct polarity (red wire for positive, black wire for negative).
3. Падключэнне прыёмніка: Connect the output terminals of the receiver module to the device or battery you intend to charge. The receiver provides 4.2V DC at 130mA, suitable for charging a 4.2V Li-ion battery. Observe correct polarity.
4. Position Coils: Place the transmitting coil and receiving coil in close proximity. For optimal performance, align the centers of the coils as closely as possible. The effective charging distance will vary based on alignment and environmental factors.
5. Уключэнне: Once all connections are secure and coils are positioned, apply 5V power to the transmitter module. The receiver module should begin outputting power.

Малюнак 2: Заключны механізм view of the transmitter and receiver modules, illustrating their compact design and wire connections.

6. Інструкцыя па эксплуатацыі

Once the module is set up and powered, operation is straightforward:

• Ensure the transmitter is powered with a stable 5V DC supply.
• Place the receiving coil within the effective range of the transmitting coil. The closer the coils are, the more efficient the power transfer.
• The receiver module will automatically convert the wirelessly received power into a stable 4.2V DC output, suitable for charging compatible devices or batteries.
• Monitor the charging status of your connected device if it has an indicator.

7. Тэхнічнае абслугоўванне

The Taidacent XKT-R03 module requires minimal maintenance:

• Keep the modules clean and free from dust and debris.
• Avoid physical stress or bending of the coils and circuit boards.
• Захоўвайце ў сухім асяроддзі, калі ён не выкарыстоўваецца.

8. Выпраўленне непаладак

9. Гарантыя і падтрымка

Information regarding specific warranty terms for the Taidacent XKT-R03 module is not provided in this manual. For warranty claims or technical support, please contact your retailer or the manufacturer, Taidacent, directly through their official channels.

Калі ласка, звярніцеся да ўпакоўкі прадукту або да прадаўца webсайт для атрымання найбольш актуальнай інфармацыі аб падтрымцы.