PINGKO Outdoor Multi-Function Portable Sport Pedometer

Прадукт скончаныview

The PINGKO Multi-Function Pedometer is designed to help you monitor your daily physical activity. It accurately tracks steps taken, distance covered in miles or kilometers, and calories burned. Featuring a large, easy-to-read LCD display, this device operates independently without requiring a computer, smartphone, or app connection. Its compact and lightweight design allows for comfortable wear in a pocket, bag, or clipped to your waistband.

Выява: спераду view of the PINGKO Pedometer, highlighting its green casing and clear digital display.

Інструкцыя па наладзе

Before first use, or after replacing the battery, you will need to set the current time, your stride length, and your weight for accurate tracking.

1. Устаноўка батарэі

The pedometer uses an Alkaline battery. To install or replace the battery, locate the battery compartment on the back of the device. Open the cover, insert the battery with the correct polarity, and close the cover securely.

Image: The pedometer's compact size and the included user manual, indicating ease of setup.

2. Setting Time, Stride Length, and Weight

Follow these steps to configure your pedometer's settings:

1. Увайдзіце ў рэжым налад: Доўгі націск НАБОР button until the display changes to setting mode.
2. Задаць фармат часу: The display will show "12Hr" or "24Hr". Press СКІД to toggle between 12-hour and 24-hour clock formats. Press НАБОР каб пацвердзіць.
3. Задаць гадзіны: The hour digits will flash. Press СКІД наладзіць гадзіну. Прэса НАБОР каб пацвердзіць.
4. Задаць хвіліны: Лічбы хвілін будуць міргаць. Прэса СКІД каб наладзіць хвіліны. Доўгі націск СКІД for quick adjustment. Press НАБОР каб пацвердзіць.
5. Set Stride Length Unit: The display will show "CM" (metric) or "IN" (imperial). Press СКІД для пераключэння. Націсніце НАБОР каб пацвердзіць.
6. Set Stride Length Value: The stride length value will flash. Press СКІД to adjust your stride length. Imperial range: 12-60 inches (1-inch interval). Metric range: 30-150 cm (2-cm interval). Press НАБОР каб пацвердзіць.
7. Set Weight Unit: The display will show "KG" (metric) or "LB" (imperial). Press СКІД для пераключэння. Націсніце НАБОР каб пацвердзіць.
8. Set Weight Value: The weight value will flash. Press СКІД to adjust your weight. Set your actual weight for accurate calorie calculation. Press НАБОР каб пацвердзіць і выйсці з рэжыму налад.

Інструкцыя па эксплуатацыі

1. Starting Activity Tracking

To begin tracking your steps, distance, and calories, ensure the pedometer is in tracking mode. If the time is displayed, press the M (Mode) button once to switch to step tracking mode. The display will show "STEP" and the step count will begin from zero (or your last recorded count if not reset).

Image: The pedometer's display showing different tracking modes, including time and calorie count.

2. ViewВашы дадзеныя

Націсніце M (Mode) button repeatedly to cycle through the different display modes:

• КРОК: Паказвае агульную колькасць пройдзеных крокаў.
• DIST: Shows the distance traveled in miles or kilometers.
• KCAL: Паказвае прыблізна колькасць спаленых калорый.
• ЧАС: Адлюстроўвае бягучы час.

3. Wearing the Pedometer for Accuracy

For the most accurate readings, it is highly recommended to clip the pedometer onto your waistband. Ensure the bottom of the pedometer is straight to the ground. If worn upside down or with the bottom facing upwards, the pedometer may not count steps accurately.

Image: Visual guide demonstrating optimal placement of the pedometer on the waistband for accurate tracking.

4. Ачыстка дадзеных

To clear all recorded data (steps, distance, calories) and reset the pedometer to zero, press the НАБОР і СКІД buttons simultaneously. This will not affect your time, stride length, or weight settings.

Тэхнічнае абслугоўванне

1. Уборка

Працірайце крокамер мяккай сухой тканінай. Не выкарыстоўвайце абразіўныя ачышчальнікі і не апускайце прыладу ў ваду.

2. Замена батарэі

When the display becomes dim or the device stops responding, it's time to replace the battery. Refer to the "Battery Installation" section under Setup for instructions.

Ліквідацыю непаладак

• Pedometer makes a sound when working: This is normal. The pedometer uses a mechanical sensor, and a slight sound indicates it is actively tracking movement.
• Inaccurate Step Counting:
  • Ensure the pedometer is clipped securely to your waistband with the bottom straight to the ground. Incorrect positioning (e.g., in a loose pocket, upside down) can lead to inaccurate readings.
  • The pedometer detects movement of your body. Shuffling or very slow movements might not be registered as steps.
  • If the unit turns off while stationary, it will automatically turn on once movement is detected. This is a power-saving feature.
• Unexpected Data Reset: Ensure buttons are not being accidentally pressed or held down by clothing or objects. The data is cleared by simultaneously pressing the SET and RESET buttons.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

Інфармацыя аб гарантыі

This PINGKO Pedometer comes with an Гарантыя 18 месяцаў з даты пакупкі. Гэтая гарантыя распаўсюджваецца на вытворчыя дэфекты і няспраўнасці пры нармальным выкарыстанні. Калі ласка, захавайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.

Падтрымка кліентаў

For any questions, technical assistance, or warranty claims, please contact PINGKO customer support through the retailer's platform or the official PINGKO website. Provide your model number (PK-793) and a detailed description of the issue for faster service.