Security Key Box
with combination lock
SSZ 400
Stainless steel
Weather resistant
For wall mounting
ASSEMBLY/OPERATING INSTRUCTIONS
General notes
Intended use
Please read the usage and maintenance instructions carefully before mounting the security key box on the wall. Keep the manual with you for future use. If the product is passed on to any third party, include the manual with it.
Warning: No hazards should be expected if the product is assembled and operated professionally and in accordance with the manual. Small parts and packaging materials can be swallowed by children and lead to choking! Make sure that small parts and packaging materials do not get into the hands of children. Dispose of the packaging material immediately.
Please read the operating manual before using the device.
It is important to note that the security key box MAY NOT be dismantled. Please handle the device with care.
The manufacturer expressly reserves the right to make technical changes.
Disclaimer
The manufacturer accepts no liability for damage or injury resulting from incorrect handling.
Disposal
Please help protect the environment by disposing of the prod- uct and the packaging materials in accordance with the local regulations. Do not dispose of the device in household waste.
Instructions for setting the password:
- Unlocking and locking:
Turn the 1 knob until it can no longer be turned. The 2 display shows „green“ when the key box is unlocked and „red“ when it is locked. - Set the password:
Set the 3 number wheels to the starting code 0-0-0-0 and press the 5 passwortsetting-button inside until it can no longer be pressed. Two small 4 cylinder pins appear at the front. Now set your new password using the 3 number wheels and finally press the 4 cylinder pins so that the 5 passwort-setting-button can return to its original position. The new password is now set.
1 knob
2 display
3 number wheels
4 cylinder pins
5 passwortsetting-button
Scope of delivery:
- security key box
- mounting material
- operating manual
Technical specifications
| Housing | Stainless steel |
| Application | Suitable for indoor and outdoor use |
| Security combination lock | With 4 digits Up to 10,000 combinations possible |
| Outside Dimensions: | H133 x W97 x D80 mm |
| Inside Dimensions: | H64 x W90 x D49 mm |
Mounting the key safe
The key safe is designed for both indoor and outdoor usage.
- Open the key safe. Now pull the front flap of the key safe towards you.
- Mark the drill holes at the desired drilling location.
Please use the back of the key safe as a template.
- Drill the holes.
Caution: Make sure that no cables or pipes are routed along the selected drilling point. Doing so can pose a risk of injury or damage to the surrounding area! - Place the dowels in the drilled holes. Note: Be aware that the supplied fastening material could prove incompatible with the desired mounting location. You can purchase fastening materials that correspond to the location in question from your local hardware store.
- Hold the key safe against the drill holes and fasten the screws into the dowels with the help of a screwdriver. Then fasten the key safe in place with the screws.
© Copyright
Reproduction or duplication
(even excerpts thereof)
is forbidden without approval of:
BASI GmbH
Konstantinstraße 387
41238 Mönchengladbach
Germany
2024
This publication, including all its parts, is protected by copyright.
Any use outside the narrow limits of copyright law without the consent of BASI GmbH is not allowed and liable to prosecution.
This applies in particular to duplications, translations, microfilming and the feeding and processing in electronic systems.
BASI GmbH
Konstantinstraße 387
41238 Mönchengladbach
Germany
facebook.com/BASIGmbH
@basi_gmbh
www.basi.eu
Documents / Resources
 | BASI SSZ 400 Security Key Box With Combination Lock [pdf] Instruction Manual SSZ 400 Security Key Box With Combination Lock, SSZ 400, Security Key Box With Combination Lock, Key Box With Combination Lock, Combination Lock, Lock |