Baseus - icon

Baseus BS PF001 T2 Pro Smart Device TrackerBS-PF001 T2 Pro Smart Device Tracker
User Manual

PRODUCT PARAMETERS

Name: Baseus T2 Pro Smart Device Tracker
Model No.: BS-PF00l
Material: PC
Product size: 35 x 33.2 x 8.1mm
Product weight: 8g
Rated voltage: 3V
Rated power: l0mW
Rated current: 3.3mA
Volume: 80-100dB
Battery: CR2032 [email protected]
Battery life: more than 12 months (calculated by 15 times per day)
Working distance: Within 30m radius for open outdoor and
indoor spaces, 10m radius for common indoor spaces
Accessories: Lanyard’l

PRODUCT PART NAME

Baseus BS-PF001 T2 Pro Smart Device Tracker

DOWNLOAD APP

Search for the “Baseus App” in the App Store, scan the QR code on the manual to download and install the app.

Baseus BS-PF001 T2 Pro Smart Device Tracker - QR codehttps://bds-api-cn.baseus.com/app/official/download

APPLY STARTUP PERMISSION SETTINGS

Please keep the “Baseus App” running in the background continuously. This ensures that the mobile phone can receive alarms and reminders from the smart device tracker normally. Click SettingsBaseus BS-PF001 T2 Pro Smart Device Tracker - iconStart the app Baseus BS-PF001 T2 Pro Smart Device Tracker - icon App startup management Baseus BS-PF001 T2 Pro Smart Device Tracker - icon Manually start the app: Allow automatic startup, associated startup, and background activities. Turn off the Power Saving Mode and the Do Not Disturb function in the system interface on the phone

CONNECT TO DEVICE (ANDROID)

  1. After downloading the APP, turn on the “Wireless function and GPS function”.
  2. Turn on “Wireless”, click “Settings”Baseus BS-PF001 T2 Pro Smart Device Tracker - icon Turn on “Geographical Location” Baseus BS-PF001 T2 Pro Smart Device Tracker - icon Turn on “Location Services”.
    *Please keep the network smooth when connecting the device.

CONNECT TO DEVICE (IOS)

  1. After downloading the APP, turn on the “Wireless function and GPS function”.
  2. Allow Wireless function Baseus BS-PF001 T2 Pro Smart Device Tracker - icon Allow the app to use your geographical location Baseus BS-PF001 T2 Pro Smart Device Tracker - icon  Click the “Allow” button.
  3. Allow notifications Baseus BS-PF001 T2 Pro Smart Device Tracker - icon  Click the “Allow” Baseus BS-PF001 T2 Pro Smart Device Tracker - icon Allow “Baseus App” to send you notifications.
    *Please turn on the Wireless function and keep the network running smoothly when connecting to devices.
    • Go to the home page and click the”+” in the upper right corner to bind your device.
    • Go to the page “Add device” and click “T2 Pro Smart Device Tracker” to add the device.
    • After the device is added, place the device close to the mobile phone and press the “Button” for 3 seconds until you hear a “Beep” sound.
    • Device connection is completed, click Find.

DEVICE SETTINGS

Alarm Mode:

  • Go to the “Device Settings” page or, turn on/off the mobile phone alarm or Smart Device Tracker alarm.

Mobile phone alarms (Set phone ringtones):

  • Select the ringtone you prefer.

“Do Not Disturb Mode” Settings (set Do Not Disturb mode):

  • Add an area to limit disturbances. Set the name, time period and area to not be disturbed.
  • When the setting is completed, return and click the “Save” button.

NOTES

  1. Remove and replace the battery: Open the back cover of the Smart Device Tracker to replace the battery. After replacement, close the back cover, and then push lightly until it is locked.
    (Note: please use a CR2032 button battery for replacement)
  2. Do not use this product in a humid environment.
  3. This product is not a toy, please keep children away from the device to avoid accidental ingestion.
  4. Do not use liquid, spray cleaner, or wet cloth to clean this product.
  5. Keep away from water sources and heat sources during use to avoid damage to the product and potential safety hazards.

Baseus BS-PF001 T2 Pro Smart Device Tracker - Disposal iconThis equipment complies with the provisions of Directive 2012/19/EU, 2006/66/EU. It is strictly forbidden to dispose of this equipment with the ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.

This device complies with part 15of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Baseus BS-PF001 T2 Pro Smart Device Tracker - Disposal and CE icon

Manufacturer: Shenzhen Times Innovation Technology Co., Ltd.
Add: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen Executive Standard: Q/SSCZ 037-2019
Hotline: +86-4000-712-711 Website: www.baseus.com

Designed by Baseus
Made in China
PB3319Z_POAO

Documents / Resources

Baseus BS-PF001 T2 Pro Smart Device Tracker [pdf] User Manual
PF001, 2AY37-PF001, 2AY37PF001, BS-PF001, T2 Pro, Smart Device Tracker, T2 Pro Smart Device Tracker, BS-PF001 T2 Pro Smart Device Tracker

Leave a comment

Your email address will not be published.