Philips ICN-2S28-N Centium Electronic Ballast Instruction Manual

1. Giriş

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Philips ICN-2S28-N Centium Electronic Ballast. This ballast is designed for use with two F28T5, F21T5, or F14T5 fluorescent lamps, and can also operate single lamps. Please read this manual thoroughly before installation and retain it for future reference.

2. Təhlükəsizlik Məlumatı

XƏBƏRDARLIQ: Risk of electric shock. Installation should be performed by a qualified electrician in accordance with all national and local electrical codes. Disconnect power at the circuit breaker before installation or servicing.

• Enerji təchizatı voltage matches the ballast's rated voltage (120V və ya 277V).
• The ballast case must be properly grounded.
• l dağıamps within 1/4 inch of a grounded metal reflector.
• Maksimum həcmtage for RED-BLUE leads is 500 Vrms.
• Insulate YELLOW leads for 600V.
• Only use rapid-start sockets with this ballast.
• Do not modify the ballast or its wiring.
• This ballast is a Semi-Conducteur, High Power Factor, Class P, Sound Rated A, Type 1 Outdoor, with Inherent Thermal Protection. It contains no PCB's.

3. Paketin məzmunu

Quraşdırmaya başlamazdan əvvəl bütün komponentlərin mövcud olduğunu yoxlayın:

• 1 x Philips ICN-2S28-N Centium Electronic Ballast

Image 1: Philips ICN-2S28-N Centium Electronic Ballast with its integrated wiring.

4. Quraşdırma və Quraşdırma

Balastın düzgün quraşdırılması üçün bu addımları izləyin:

1. Gücü ayırın: Before starting any work, ensure the main power supply to the fixture is turned off at the circuit breaker.
2. Mount the Ballast: Securely mount the Philips ICN-2S28-N ballast within the fixture. Ensure the ballast case is grounded.
3. Naqil Bağlantıları: Refer to the wiring diagram on the ballast label and the instructions below.

Şəkil 2: Ətraflı view of the ballast label, including wiring diagram and technical specifications.

Naqil sxemi təfərrüatları:

• Input Power (120V or 277V):
  • birləşdirin QARA naqili Xətt (L) girişinə qoşun.
  • birləşdirin AĞ naqili Neytral (N) girişinə qoşun.
• Lamp Connections (for 2 Lamps):
  • birləşdirin MAVİ wires to one end of each lamp.
  • birləşdirin QIRMIZI wires to the other end of each lamp.
  • birləşdirin SARI wires to the remaining terminals of the lamps.
• Torpaqlama: Ensure the ballast case is properly grounded to the fixture's metal housing.

Vacib qeydlər:

• This ballast is compatible with (2) F28T5, (2) F21T5, and (2) F14T5 lamps. It also works for single lamps.
• l dağıamps within 1/4 inch of a grounded metal reflector for optimal performance and safety.
• Insulate any unused YELLOW leads for 600V.
• Only use rapid-start sockets.

Image 3: The ballast with its color-coded wires clearly visible for connection.

5. Əməliyyat

Once the Philips ICN-2S28-N Centium Electronic Ballast is correctly installed and wired, operation is straightforward:

1. After completing the installation, restore power to the circuit at the breaker.
2. Turn on the light switch connected to the fixture. The ballast will automatically ignite and regulate the power to the fluorescent lamps.
3. The ballast is designed for programmed start, ensuring optimal lamp həyat.

6. Baxım

The Philips ICN-2S28-N Centium Electronic Ballast is designed for long-term, reliable operation with minimal maintenance. However, periodic checks can help ensure continued performance:

• Elektrik kəsilməsi: Hər hansı təmir və ya yoxlamadan əvvəl həmişə elektrik enerjisini ayırın.
• Təmizləmə: Keep the ballast and fixture free from dust and debris to ensure proper heat dissipation. Use a dry, soft cloth for cleaning.
• Naqillərin yoxlanılması: Periodically inspect wiring connections for any signs of wear, fraying, or loose connections. Ensure all connections remain secure.
• Lamp Əvəzetmə: L əvəz edərkənamps, ensure they are of the correct type and wattage as specified for this ballast (F28T5, F21T5, F14T5).
• Ekoloji Şərtlər: Ensure the ballast operates within its specified temperature range and environmental conditions (Type 1 Outdoor).

7. Giderme

If your fluorescent fixture is not operating correctly, consult the following troubleshooting guide:

Əgər problemlərin aradan qaldırılması addımları problemi həll etmirsə, ixtisaslı elektrikçi və ya Philips müştəri dəstəyi ilə əlaqə saxlayın.

8. Spesifikasiyalar

Below are the technical specifications for the Philips ICN-2S28-N Centium Electronic Ballast:

• Model nömrəsi: ICN-2S28-N
• Brend: PHILIPS (Advance Ballast)
• Giriş həcmitage: 120V / 277V
• Uyğun Lamps: (2) F28T5, (2) F21T5, (2) F14T5 (also works for single lamps)
• Wattage: 28 watts (for F28T5 lamps)
• İşıq mənbəyi növü: Floresan
• Güc mənbəyi: Kabelli Elektrik
• Material: plastik
• Rəng: Qara
• Forma: Düzbucaqlı
• Bitmə növü: Qara
• Montaj növü: Rack Mount
• Maddə çəkisi: 9.6 unsiya
• Ölçülər (U x G x Y): 9.5" x 1.25" x 1"
• UPC: 781087080726
• Sertifikatlar: UL Listed 704G, CSA (NRTL/C)
• Xüsusiyyətlər: IntelliVolt (120V to 277V 50/60Hz), Programmed Start, High Power Factor, Class P, Sound Rated A, Type 1 Outdoor, Inherent Thermal Protection, No PCB's.

Şəkil 4: Yan view of the ballast, illustrating its compact dimensions and mounting points.

9. Zəmanət və dəstək

This Philips ICN-2S28-N Centium Electronic Ballast comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact Philips customer support.

For technical assistance or support, please contact Philips directly. Technical information is often available via their official websaytı və ya dəstək xəttinə zəng edərək.

• İstehsalçı: Advance Ballast (a Philips company)
• Texniki məlumat: 1.800.372.3331 (as seen on product label)
• Onlayn dəstək: Rəsmi Philips mağazasına baş çəkin website for product support and resources.