1. Giriş
This manual provides detailed instructions for the safe and effective use of your Orlushy 500W Submersible Aquarium Heater. Please read this manual thoroughly before installation and operation to ensure proper function and the safety of your aquatic environment.
2. Təhlükəsizlik Təlimatları
- Qızdırıcının olduğundan əmin olun tam su altında qalıb in water before plugging it into a power outlet.
- Always unplug the heater and allow it to cool for 10-20 minutes before removing it from the water.
- The external controller is suya davamlı deyil. Keep it in a dry location, away from water splashes.
- Do not expose any part of the heater body to air or bury it in sand, as this may cause damage to the unit or lead to accidents.
- Verify that your power supply voltage matches the heater's requirements.
- Cihazı uşaqların əli çatmayan yerdə saxlayın.
- If the power cord or heater shows any signs of damage, discontinue use immediately and contact customer support.
- This heater is designed for indoor aquarium use only.
3. Paketin məzmunu
Paketi açarkən, aşağıdakı bütün komponentlərin daxil olduğundan əmin olun:
- 1 x Orlushy 500W Submersible Aquarium Heater
- 1 x External Digital Temperature Controller
- 1 x Strip Thermometer
- 2 x Suction Cups for Heater Mounting
- 1 x Rubber Crash Protection Case (pre-installed on heater)
4. Məhsulun xüsusiyyətləri
- 500W Heating Capacity: Designed for 55-80 gallon freshwater and saltwater aquariums.
- Kompakt dizayn: Measures 9.8 inches in length for easy placement and concealment within the aquarium.
- Durable Quartz Glass: Constructed from thickened gray quartz glass, offering enhanced hardness, high-temperature resistance, and explosion-proof properties.
- Sürətli istilik: Features uniformly wound nickel-chromium wire for efficient and quick heat dissipation throughout the water.
- Accurate Water Sensor: Provides real-time temperature correction to maintain a stable and consistent water temperature.
- Həddindən artıq istidən qorunma: Automatically cuts off power and displays an "EE" error code if the water temperature exceeds 95℉ (35℃), protecting aquatic life.
- External Digital Controller: Allows safe temperature adjustment from 65℉ to 93℉ (18℃ to 34℃) without submerging hands in water.
- LED Rəqəmsal Ekran: Clearly shows both the real-time water temperature (PV) and the set temperature (SV).
- Çox yönlü istifadə: Suitable for freshwater tanks, saltwater tanks, betta tanks, and turtle tanks.
5. Quraşdırma Təlimatları
- Qızdırıcının yerləşdirilməsi: Position the heater fully submerged in your aquarium. It can be installed vertically or horizontally using the provided suction cups. Ensure good water circulation around the heater for even heat distribution.
- Tam Daldırma: The heater must be completely underwater before connecting it to a power source. Operating the heater partially or fully out of water will cause damage.
- Nəzarətçinin Yerləşdirilməsi: Mount the external controller in a dry location, away from water splashes. The controller is not waterproof.
- Enerji bağlantısı: Once the heater is properly submerged and the controller is securely placed, plug the heater into a suitable power outlet.
- Initial Temperature Check: Allow the heater to operate for a few hours. Use the included strip thermometer or another reliable aquarium thermometer to verify the tank's temperature and ensure it matches your desired setting.
Application for Large Tanks
For larger aquariums (150-200 gallons), it is recommended to install two 500W heaters rather than a single 1000W heater. This approach offers:
- More rapid and efficient heating.
- More uniform heat distribution throughout the tank.
- Improved energy efficiency, as the set temperature can be reached faster.
- Enhanced safety: if one heater fails, the other can still provide some heat, preventing a complete temperature drop.
6. Əməliyyat Təlimatları
- Temperaturun qurulması:
Press the "SET" button on the external controller. The set temperature (SV) will flash.
Press the "SET" button repeatedly to adjust the desired temperature. Each press changes the value by 1℉. The adjustable range is 65℉ to 93℉ (18℃ to 34℃).
The display will show the current water temperature (PV) and the set temperature (SV). - İstilik göstəricisi: A red light on the controller indicates the heater is actively heating. A yellow light indicates heating has stopped, and the desired temperature has been reached.
- Həddindən artıq istidən qorunma: If the water temperature exceeds 95℉ (35℃), the heater will automatically power off, and the display will show "EE". This feature protects your aquatic life from dangerously high temperatures.
7. Baxım
- Daimi Təmizlik: Periodically clean the heater surface to prevent algae and mineral buildup, which can reduce heating efficiency. Always unplug the heater and allow it to cool completely before cleaning. Use a soft cloth or brush and aquarium-safe cleaning solutions if necessary.
- During Water Changes: Ensure the heater remains fully submerged during water changes. If the water level drops below the heater, unplug it immediately and allow it to cool before refilling the tank to the appropriate level.
- Nəzarətçi Baxımı: Keep the external controller dry and clean. Avoid exposing it to water or high humidity.
- Yoxlama: Regularly inspect the heater unit and its power cord for any signs of damage, cracks, or wear. If any damage is found, discontinue use immediately and contact customer support.
8. Giderme
| Problem | Mümkün Səbəb | Həll |
|---|---|---|
| Heater not heating (no red light) | Not plugged in / Power outage Temperatur çox aşağı ayarlanıb Water temperature already at or above set temperature | Elektrik bağlantısını yoxlayın. Increase set temperature on controller. This is normal operation. Yellow light indicates heating has stopped. |
| "EE" error displayed | Water temperature exceeds 95℉ (35℃) | Heater has activated overheat protection. Unplug the heater, allow water to cool, and check for external heat sources or heater malfunction. |
| Yanlış temperatur oxunması | Sensor issue / Poor water circulation | Ensure heater is placed in an area with good water flow. Use a separate thermometer to verify accuracy. |
| Heater cracked or damaged | Physical impact / Improper handling | Discontinue use immediately. Unplug and remove carefully. Contact customer support for replacement. |
9. Spesifikasiyalar
- Model: RH500
- Güc: 500W
- Temperatur Nəzarət Aralığı: 65℉ - 93℉ (18℃ - 34℃)
- Applicable Tank Size: 55-80 Qalon
- Heater Length: Təxminən 9.8 düym
- Material: Thickened Gray Quartz Glass
- Uyğunluq: Şirin və duzlu su akvariumları
- Həddindən artıq istidən qorunma: 95 ℉ (35 ℃) temperaturda avtomatik sönmə
- Elektrik kabelinin uzunluğu: Təxminən 6 fut
10. Zəmanət və Dəstək
The Orlushy 500W Submersible Aquarium Heater comes with a 180 günlük zəmanət for free replacement if any insoluble problem occurs to the heater.
For technical support, warranty claims, or any questions regarding your product, please contact Orlushy customer service through the retailer's platform or the official Orlushy website. Please have your model number (RH500) and purchase date available when contacting support.