1. Əhəmiyyətli Təhlükəsizlik Təlimatları
Read and understand all safety warnings and instructions before operating this electric hoist. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage. Keep this manual for future reference.
1.1 Ümumi Təhlükəsizlik
- Həmişə təhlükəsizlik eynəkləri, əlcəklər və möhkəm ayaqqabılar daxil olmaqla, müvafiq fərdi qoruyucu vasitələrdən (PPE) istifadə edin.
- Ensure the work area is clear of obstructions, well-lit, and free from unauthorized personnel.
- Do not operate the hoist under the influence of drugs, alcohol, or medication.
- Inspect the hoist for damage before each use. Do not operate if damaged.
- Keep hands and body clear of moving parts and the load during operation.
1.2 Elektrik təhlükəsizliyi
- Connect the hoist only to a properly grounded power outlet with the specified voltage (220V).
- Do not expose the hoist to rain or wet conditions.
- Never use the power cord to carry, pull, or unplug the hoist.
- Bütün elektrik bağlantılarının təhlükəsiz və zədələnməmiş olduğundan əmin olun.
1.3 Lifting Safety
- Never exceed the rated load capacity of the hoist (125 kg for single cable, 250 kg for double cable).
- Ensure the load is properly balanced and securely attached to the hook.
- Do not lift people or objects over people.
- Avoid sudden starts or stops when lifting or lowering a load.
- Use the emergency stop switch immediately if an unsafe condition occurs.
2. Məhsul bitdiview
The VEVOR Electric Wire Rope Hoist PAYX250-2 is designed for lifting heavy objects in various environments such as garages, warehouses, and factories. It features a robust pure copper motor, a durable steel wire rope, and a wired remote control for safe operation.
Şəkil 2.1: Əsas view of the VEVOR Electric Wire Rope Hoist, highlighting its compact design and robust construction.
Figure 2.2: The electric hoist installed in a typical garage environment, demonstrating its application for lifting tasks.
2.1 Əsas komponentlər
- Motor: Pure copper motor with a cooling fan for efficient and prolonged operation.
- Tel İp: Durable braided steel cable (Φ 3 mm * L 12 m, 19 strands).
- Qarmaq: Alloy steel hook for secure load attachment. Includes a double hook for increased capacity.
- Uzaqdan İdarəetmə: Wired remote with a 4m cable for safe operation from a distance, featuring an emergency stop button.
- Montaj braketləri: Two channel mounting brackets for easy installation.
- Təhlükəsizlik Xüsusiyyətləri: Emergency stop switch and electromagnetic braking system to prevent accidental slippage and overturning.
3. Quraşdırma
Proper installation is crucial for safe and effective operation of the hoist.
3.1 Qaldırıcının quraşdırılması
- Select a sturdy overhead beam or crossbar capable of supporting the hoist's weight and the maximum intended load.
- Attach the two provided channel mounting brackets to the hoist.
- Securely mount the hoist to the chosen overhead structure using appropriate fasteners. Ensure the brackets are tightly fastened to prevent movement during operation.
Figure 3.1: Illustration of the metal adjustable fixing rings (mounting brackets) and their dimensions for secure installation.
3.2 Elektrik bağlantısı
- Ensure the power supply matches the hoist's voltage tələbi (220V).
- Plug the hoist into a grounded electrical outlet. Avoid using extension cords if possible; if necessary, use a heavy-duty, grounded extension cord rated for the hoist's power requirements.
3.3 Cable Configuration (Single vs. Double Line)
The hoist can be configured for single or double line lifting, affecting its capacity and lifting speed.
- Single Cable: Provides higher lifting height and speed (40 ft/12 m, 33 ft/min) with a capacity of 125 kg.
- Double Cable: Achieved by using the provided pulley hook, which doubles the lifting capacity to 250 kg but halves the lifting height and speed (19.7 ft/6 m, 16 ft/min).
Figure 3.2: Comparison of single cable setup (left) for higher speed and height, and double cable setup (right) using a pulley hook for increased lifting capacity.
4. Əməliyyat Təlimatları
Follow these steps for safe and effective operation of your electric hoist.
4.1 Pultdan istifadə
The hoist is operated via a wired remote control, allowing you to maintain a safe distance from the load.
Figure 4.1: The multi-functional remote control handle with its 14ft (approx. 4m) cable, featuring an emergency stop button.
- Yuxarı düymə: Press and hold to lift the load.
- Aşağı düymə: Press and hold to lower the load.
- Təcili Stop Düyməsi: Press the large red button to immediately stop all hoist operations in an emergency. Twist to reset.
- Always operate the hoist from a position where you have a clear view of the load and the surrounding area.
4.2 Lifting Procedures
- Before lifting, ensure the load is within the hoist's capacity and is securely attached to the hook.
- Slowly lift the load a few inches off the ground to check for balance and stability.
- If the load is stable, proceed to lift it to the desired height. Avoid swinging the load.
- When lowering, do so slowly and steadily. Guide the load if necessary, keeping hands clear.
- Asılmış yükü heç vaxt nəzarətsiz qoymayın.
5. Baxım
Daimi texniki qulluq qaldırıcınızın uzunömürlülüyünü və təhlükəsiz işləməsini təmin edir.
5.1 Müntəzəm yoxlama
- Tel İp: Inspect the wire rope for kinks, fraying, corrosion, or broken strands before each use. Replace if any damage is observed.
- Qarmaq: Check the hook for deformation, cracks, or excessive wear. Ensure the safety latch operates correctly.
- Motor and Housing: Inspect for any visible damage, loose fasteners, or unusual noises during operation.
- Electrical Cable and Remote: Check for cuts, abrasions, or damage to the power cord and remote control cable.
5.2 Təmizlik və saxlama
- Keep the hoist clean and free from dirt, dust, and debris. Use a dry cloth to wipe down surfaces.
- Store the hoist in a dry, clean, and secure location away from moisture and extreme temperatures.
6. Giderme
Ümumi problemlər və onların potensial həlli yolları üçün bu bölməyə baxın.
| Problem | Mümkün Səbəb | Həll |
|---|---|---|
| Qaldırıcı işləmir | Enerji təchizatı yoxdur Emergency stop engaged Mühərrikin həddindən artıq yüklənməsinin qorunması aktivləşdirildi | Elektrik bağlantısı və çıxışı yoxlayın Təcili dayandırma düyməsini buraxın Allow motor to cool down, reduce load |
| Əməliyyat zamanı qeyri-adi səs-küy | Boş komponentlər Yağlama olmaması Daxili ziyan | Inspect for loose parts and tighten İxtisaslı texniki ilə məsləhətləşin Discontinue use and seek professional service |
| Load slips or drops | Əyləc nasazlığı Həddindən artıq yükləmə | Discontinue use immediately and contact service Ensure load is within capacity |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, contact VEVOR customer support.
7. Spesifikasiyalar
Technical data for the VEVOR Electric Wire Rope Hoist PAYX250-2.
Figure 7.1: Detailed product dimensions and a summary of key specifications.
| Parametr | Dəyər |
|---|---|
| Model nömrəsi | PAYX250-2 |
| Lifting Load Capacity (Single Cable) | 125 kq (275 funt) |
| Lifting Load Capacity (Double Cable) | 250 kq (550 funt) |
| Lifting Height (Single Cable) | 12 m (40 fut) |
| Lifting Height (Double Cable) | 6 m (19.7 fut) |
| Lifting Speed (Single Cable) | 10 m/dəq (33 fut/dəq) |
| Lifting Speed (Double Cable) | 5 m/dəq (16 fut/dəq) |
| Motor Gücü | 510 Vt |
| Cildtage | 220 V |
| Kabel Ölçüsü | Φ 3 mm * L 12 m (19 strands) |
| Məhsulun Ölçüləri (U x G x Y) | 350 x 135 x 160 mm (13.8 x 5.3 x 6.3 düym) |
| Məhsul Çəkisi | 10.35 kq (22.82 funt) |
| Nəzarət rejimi | Simli Uzaqdan İdarəetmə |
| Qiymətləndirmə fırlanma sürəti | 2800 rpm |
| Nominal fırlanma anı | 1.1 Nm |
Figure 7.2: Diagram illustrating the internal motor components and the cooling fan designed for heat dissipation.
8. Zəmanət və Dəstək
VEVOR məhsulları davamlılıq və performans üçün nəzərdə tutulmuşdur. Zəmanət məlumatları, texniki dəstək və ya xidmət sorğuları üçün məhsulunuza daxil olan zəmanət kartına müraciət edin və ya rəsmi VEVOR-a baş çəkin. websayt. Satınalma qəbzini alışın sübutu olaraq saxlayın.
