AXIS Q6315-LE PTZ Network Camera Installation Guide

Q6315-LE PTZ Network Camera

AXIS Q6315-LE PTZ Network Camera Installation Guide

axis camera

Read

this first Read through this Installation Guide carefully before installing the product. Keep the Installation Guide for future reference.

Legal considerations

Video surveillance can be regulated by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.

This product includes the following licences:

  • one (1) H.264 decoder license
  • one (1) H.265 decoder license To purchase further licenses, contact your reseller.

Liability

Every care has been taken in the preparation of this document. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material. This product is only to be used for its intended purpose.

Intellectual property rights

Axis AB has intellectual property rights relating to technology embodied in the product described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the patents listed at axis.com/patent and one or more additional patents or pending patent applications in the US and other countries. This product contains licensed third-party software. See the menu item “About” in the product’s user interface for more information. This product contains source code copyright Apple Computer, Inc., under the terms of Apple Public Source License 2.0 (see opensource.apple.com/apsl). The source code is available from developer.apple.com/bonjour/.

Equipment modifications

This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user-serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.

Trademark acknowledgements

AXIS COMMUNICATIONS, AXIS, ARTPEC and VAPIX are registered trademarks of Axis AB in various jurisdictions. All other trademarks are the property of their respective owners. Apple, Apache, Bonjour, Ethernet, Internet Explorer, Linux, Microsoft, Mozilla, Real, SMPTE, QuickTime, UNIX, Windows, and WWW are registered trademarks of the respective holders. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Oracle and/or its affiliates. The UPnP Word Mark and UPnP Logo are trademarks of Open Connectivity Foundation, Inc. in the United States or other countries.
SD, SDHC, and SDXC Logos are trademarks of SD-3C LLC. SD, SDHC and SDXC are trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both. Regulatory information Europe

This product complies with the applicable CE marking directives and harmonized standards:

  • Electromagnetic Compatibility (EMC) Directive
    2014/30/EU. See Electromagnetic compatibility (EMC) on page 2 .
  • Low Voltage Directive (LVD) 2014/35/EU. See Safety on page 3 .
  • Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU and 2015/863, including any amendments, updates or replacements. See Disposal and recycling on page 3 . A copy of the original declaration of conformity may be obtained from Axis Communications AB. See Contact information on page 4 . Electromagnetic compatibility (EMC)

This equipment has been designed and tested to fulfill applicable standards for:

  • Radio freqission when installed agency according to the instructions and used in its intended environment. · Immunity to electrical and electromagnetic phenomena when installed according to the instructions and used in its intended environment. USA This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested using a shielded network cable (STP) and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The product shall be connected using a shielded network cable (STP) that is properly grounded. Contact information Axis Communications Inc. 300 Apollo Drive Chelmsford, MA 01824 United States of America Tel: +1 978 614 2000

Canada This digital apparatus complies with CAN ICES-3 (Class A). The product shall be connected using a shielded network cable (STP) that is properly grounded. Europe This digital equipment fulfills the requirements for RF emission according to the Class A limit of EN 55032. The product shall be connected using a shielded network cable (STP) that is properly grounded. Notice! This is a Class A product. In a domestic environment this product may cause RF interference, in which case the user may be required to take adequate measures. Australia/New Zealand This digital equipment fulfills the requirements for RF emission according to the Class A limit of AS/NZS CISPR 32. The product shall be connected using a shielded network cable (STP) that is properly grounded. Notice! This is a Class A product. In a domestic environment this product may cause RF interference, in which case the user may be required to take adequate measures. Japan A VCCI A (STP) LAN Korea . STP (shielded twisted pair) .
Safety This product complies with IEC/EN/UL 62368-1, safety of audio/video and IT equipment, and IEC/EN/UL 60950-22, Safety of Information Technology Equipment. The product shall be grounded via an appropriate grounding cable. When used with Power over Ethernet (PoE), the Power Sourcing Equipment (PSE) shall comply with IEEE 802.3at/802.3bt and Limited Power Source (LPS) according to clause 2.5 of IEC/EN/UL 60950-1 or annex Q of IEC/EN/UL 62368-1.
Photobiological safety This product fulfills the requirements for photobiological safety according to IEC/EN 62471 (risk group 2).

Laser safety This product complies with IEC 60825-1 Class 1, safety of laser products. Disposal and recycling When this product has reached the end of its useful life, dispose of it according to local laws and regulations. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. In accordance with local legislation, penalties may be applicable for incorrect disposal of this waste. Europe
This symbol means that the product shall not be disposed of together with household or commercial waste. Directive 2012/19/EU on waste electrical and electronic equipment (WEEE) is applicable in the European Union member states. To prevent potential harm to human health and the environment, the product must be disposed of in an approved and environmentally safe recycling process. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. Businesses should contact the product supplier for information about how to dispose of this product correctly. This product complies with the requirements of Directive 2011/65/EU and 2015/863 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS). China

This product complies with the requirements of SJ/T 11364-2014, Marking for the restriction of hazardous substances in electrical and electronic products.

camera setupsetup camera

camera holecaution icon

lock buttonnetwork camera

camera button
switch lock

camera buttons

camera 5
camera screws
inserting tube

camera diagram

utility device

sensor device

rotate camera

Contact information Axis Communications AB Gränden 1 223 69 Lund Sweden Tel: +46 46 272 18 00 Fax: +46 46 13 61 30 axis.com

Warranty information For information about Axis’ product warranty and thereto related information, go to axis.com/warranty.

Support Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response.

If you are connected to the Internet, you can:

  • download user documentation and software updates
  • find answers to resolved problems in the FAQ database, search by product, category, or phrase
  • report problems to Axis support staff by logging in to your private support area
  • chat with Axis support staff
  • visit Axis Support at axis.com/support

Learn more! Visit Axis learning center axis.com/academy for useful trainings, webinars, tutorials and guides.

Safety information Hazard levels

DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE Indicates a situation which, if not avoided, could result in damage to property.
Other message levels Important Indicates significant information which is essential for the product to function correctly. Note Indicates useful information which helps in getting the most out of the product.
Safety instructions WARNING
IR emitted from this product. Do not stare at operating lamp.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

NOTICE

  • This is a Class 1 laser product
  • The Axis product shall be used in compliance with local laws and regulations.
  • Store the Axis product in a dry and ventilated environment.
  • Avoid exposing the Axis product to shocks or heavy pressure.
  • Do not install the product on unstable poles, brackets, surfaces or walls.
  • Use only applicable tools when installing the Axis product.

Using excessive force with power tools could cause damage to the product.

  • Do not use chemicals, caustic agents, or aerosol cleaners.
  • Use a clean cloth dampened with pure water for cleaning.
  • Use only accessories that comply with the technical specification of your product.

These can be provided by Axis or a third party. Axis recommends using Axis power source equipment compatible with your product.

  • Use only spare parts provided by or recommended by Axis.
  • Do not attempt to repair the product yourself. Contact Axis support or your Axis reseller for service matters.
  • Do not point the camera lens toward the sun or other high-intensity radiation sources because this could cause damage to the camera.
  • Use a yellow/green colored grounding cable of at least 0.5 mm2 or 20 AWG.

Transportation NOTICE

  • When transporting the Axis product, use the original packaging or equivalent to prevent damage to the product. Battery The Axis product uses a 3.0 V BR2032 lithium battery as the power supply for its internal real-time clock (RTC). Under normal conditions this battery will last for a minimum of five years.

CAUTION Do not replace the battery yourself. Contact Axis support if the log message requests a battery change. Lithium coin cell 3.0 V batteries contain 1,2-dimethoxyethane; ethylene glycol dimethyl ether (EGDME), CAS no. 110-71-4. Dome cover

NOTICE

  • Be careful not to scratch, damage or leave fingerprints on the dome cover because this could decrease image quality. If possible, keep the protective plastic on the dome cover until the installation is complete.
  • Do not clean a dome cover that looks clean to the eye and never polish the surface. Excessive cleaning could damage the surface.
  • For general cleaning of the dome cover it is recommended to use a non-abrasive, solvent-free neutral soap or detergent mixed with pure water and a soft, clean cloth. Rinse well with pure lukewarm water. Dry with a soft, clean cloth to prevent water spotting.
  • Never use harsh detergents, gasoline, benzene, acetone, or similar chemicals.
  • Avoid cleaning the dome cover in direct sunlight or at elevated temperatures.

Installation Guide AXIS Q6315-LE PTZ Network Camera © 2020 – 2021 Axis Communications AB

Ver. M4.2 Date: March 2021 Part No. 2109906

Documents / Resources

AXIS Q6315-LE PTZ Network Camera [pdf] Installation Guide
Q6315-LE, PTZ Network Camera

References

Leave a comment

Your email address will not be published.