Axess PABT6016

15” MEGA BLAST

Trolley Party Speaker + 1.5” Tweeter

PABT6016

Thank you for your support and trust on purchasing the products of our company. To fully exert the function of the product, we suggest you to read the operating instruction carefully before using it, for the convenience of grasping the connection method and using points. Please take care of the operating instruction after reading it for the purpose of further reference.

SPECIFICATIONS

15” Bluetooth Speaker + 1.5” tweeter
Party LED lights
USB/TF/AUX inputs
FM Radio
Microphone input
Front Control Panel
Output Power: 1000 PMPO
Frequency Response 50Hz-20kHz
Power Supply: DC13.5V
Reachargeable Battery: 11.1V/3600mAh
Remote control
Wired Microphone

REMOTE CONTROL FUNCTIONS

REMOTE CONTROL

  1. . Power Switch: Press this switch turn ON and OFF the speaker
  2. Mode Selector: Press this button to switch between USB, TF, FM and Bluetooth inputs
  3. Repeat Track: Tap this button to repeat single track
  4. EQ mode switching
  5. Previous FM station (CH-): When usign the speaker in FM mode, press this button to go to the previous stored FM station
  6. Next FM Station (CH+): When using the speaker in FM mode press this button to go to next stored FM station
  7. Previous Track: When using the speaker in USB, TF card and Bluetooth mode, press this button to go to the preivous track
  8. Next Track: When using the speaker in USB, TF card and Bluetooth mode, press this button to go to the next track
  9. Pause and FM scan: Press this button to pause the signal from the USB flash drive, TF Card, or Bluetooth inputs. When using the speaker in FM mode, press this button to auto scan for available stations
  10. Volume –
  11. Volume +
  12. (0-9) number buttons

SPEAKER CONTROL PANEL

SPEAKER CONTROL PANEL

  1. LED Lights Power button: Press this button to turn ON and OFF the Front LEDs.
  2. Insert Microphone to front panel MIC jack, adjust MIC VOL and ECHO to best level.
  3. AUX input: connect your smartphone, MP3 player, laptop or other audio device to this input.
  4. Microphone Priority: When the microphone priority is activated, speaking into the microphone will automatically lower the audio signal 20dB. When the two speakers are switched to bluetooth mode, press the TWS function button on any machine for 3-5 seconds to enter the TWS matching state, then the two speakers will be auto- matically paired and connected. When the “dong” tone is heard that means the pairing was successful, and the LED screen has a display prompt.
  5. Mode selector/recording: press this button to switch between USB, TF, and Bluetooth inputs. Press and hold 3-5 seconds to begin recording onto the USB drive or TF card.
  6. Repeat Track: tap this button to single tune repeat
  7. Previosu track/ Previous FM station (CH-): When using the speaker in USB. TF card and Bluetooth mode, press this button to go to previous track. When using the speaker in FM mode, press this button to go to the previous stored FM station.
  8. Play/Pause and FM scan: Press this button to pause the signal from the USB drive, TF card or bluetooth inputs. When using the speaker in FM mode, press this button auto scan for available stations. Each station will be stored. Press the CH+ and CH- to choose a station.
  9. Next track/ Next FM station (CH+): When using the speaker USB, TF card and Bluetooth mode, press this button to go to the next track. When using the speaker in FM mode, press this button to go to the next stored FM station.
  10. USB Flash Drive Input: insert your USB drive into this slot. The unit will only read MP3, WAV, WMA files from teh USB flash drive. The maximum storage size of USB flash drive cannot exceed 32GB. Do not attempt to connect a computer to the USB input as the speaker will not be able to connect to a computer.
  11. USB/TF display screen: the elapsed time and format will appear on screen for the USB/TF card inputs
  12. TF Input: Insert your TF card into this slot. The unit will only read MP3, WAV, WMA files from the TF card flash drive cannot exceed 32 GB.
  13. Power Switch: Press this switch turn on and off the speaker. Before powering on the speaker make sure the volume levels are turned down to prevent damage to the amplifiers or speakers.
  14. DC Charging Port: Insert the charging adapter into the DC9V input port on the rear of the unit. When the battery is charging this indicator will illuminate. When the battery is fully charged the indicator will turn off.
  15. Main Volume Knob: use this knob to adjust the volume of USB//TF/BT/FM music
  16. Treble Knob: Use this knob to adjust the treble levels.
  17. Bass Knob: Use this knob to adjust the bass levels.
  18. Microphone Volume Knob: Use this knob to adjust the microphone volume levels.
  19. Microphone Echo Knob: Use this knob to adjust the microphone echo levels.

ATTENTION!

For first time use, fully charge the device until the light indicator turns off as instructed in the manual. This can take up to approximately 8 hours to fully charge. If you don’t, device will not function at fully capacity.

PROMPT

When people sleep, they need a quiet environment. Please turn off music or turn off the power while sleeping.

electric shock

This symbol indicates to user that the machine with risk of electric shock

important operation

This symbol indicates to user that the machine with important operation and maintenance instruction

Axess PABT6016 15″ Mega Blast Trolley Party Speaker 1.5” Tweeter User Manual – Optimized PDF
Axess PABT6016 15″ Mega Blast Trolley Party Speaker 1.5” Tweeter User Manual – Original PDF

Leave a comment

Your email address will not be published. Required fields are marked *