AVS logo

 Instructions

IM007 Engine Immobiliser with Keypad

IMPORTANT. Keep this card in a safe place.
To Disarm: With car IGN off: Press [*](CODE)[#] You will hear 2 beeps. You can now start your car within 15 seconds. Blue LED will turn off when engine starts.
Auto Arm: 30 sec after IGN off > Blue LED flashes slowly
Wrong Code Entry: Hear 4 beeps > if wrong 3 times in a row, 60 second lock-out period to next attempt.
Valet/Service Mode: Disarm > Turn IGN on > Press [*][#](CODE)[#][#] > Hear 3 beeps > Blue LED on solid.
To Manually exit: IGN on > Press & hold [*] for 2 Seconds > Head 3 beeps > Blue LED turns off.
Allows person to drive car without code for 15min max at a time.
To Change 4 Digit PIN: Disarm > Turn IGN on > Pess [*][#][#](CODE)[#][#][#] > Hear 2 beeps > Blue LED Flashes fast > Within 15s Press [*](NEW CODE)[#] > Hear 2 beeps, new PIN is now saved.
Note: Code can’t be all the 4 same digits, i.e. 1111

AVSIMM IMMOBILISER
Published: March 2024

AVS IM007 Engine Immobiliser with Keypad - Qr Code

https://avscarsecurity.co.nz/AVSIMM

Scan the QR code or see the website for more information about your immobilizer

AVS logo

+64 9 273 3600
www.avscarsecurity.co.nz

Documents / Resources

AVS IM007 Engine Immobiliser with Keypad [pdf] Instructions
AVSIMM_CARD, IM007 Engine Immobiliser with Keypad, IM007, Engine Immobiliser with Keypad, Immobiliser with Keypad, Keypad

References

Leave a comment

Your email address will not be published. Required fields are marked *