ASA9 High Definition Network Camera
“
Product Information
Specifications
- Model: AS-A9
- Network Camera Type: High-Definition
- Supported App: V720
- Connection: WiFi
- Power Source: ON/OFF button
Product Usage Instructions
Client Downloading
Please follow these steps to download and install the V720 app
for your device:
- Scan the QR code located on the right side of the manual.
- Download and install the V720 app from the mobile phone
application store or by searching for V720.
Add Device
To add your device to the V720 app, follow these steps:
- Open the V720 app and click on the “+” icon in the upper right
corner to initiate the binding process. - Select or enter the WiFi account you want to use and input the
password.
AP Mode
To set up AP mode for your device, follow these steps:
- Press and hold the mode button until the blue indicator of the
camera flashes quickly, then release it. - Refresh the dropdown list in the V720 app to confirm successful
short-range mode connection.
Device Function Explanation
The device functions are as follows:
- Power On: Press the ON/OFF button.
- Reset Device: Press and hold the MODE
button.
Matters Needing Attention
FCC Caution: Ensure compliance with FCC
regulations while using the device.
FAQ
Q: How can I reset the device?
A: Press and hold the MODE button to reset the device as per the
instructions.
Q: What should I do if the device fails to bind
successfully?
A: Make sure you have entered the correct WiFi credentials and
try again. If issues persist, contact customer support.
“`
High-Definition network camera user’s manual
Thank you for purchasing this product. Please read this manual carefully before using it and keep it in a safe place. Client downloading
Please scan the lower (right) QR code, download and install the “v720” app, or search for “V720” in the mobile phone application store to download and install.
Add device
1. Open the “v720” app and click “+” in the upper right corner of the page to start the binding process.
3. Select or enter the WiFi account you want to use and fill in the password
AP mode
1. Press and hold the mode button until the blue indicator of the camera flashes quickly and then release it.
3. Return to the “v720” app and refresh dropdownlist, when the device displays that means the short-range mode connection is successful.
Device function explanation
Model: AS-A9
2. Turn on and reset the device according to the instructions below. When the reset is successful, the blue indicator flashes quickly. Click Next when finished.
4. Wait for the device to be bound successfully.
Press the ON/OFF button to power on
Press and hold the MODE button to reset the device
2. Mobile phone turn on the WIFI and connect to the WIFI hotspot starting with “NAX_”.
Matters needing attention
1. The applicable working temperature of this product is -10°C~50°C. Please do not use this product in an environment where the temperature is too high or too low. 2. This product is a precision electronic product. Please do not use this product in an environment where is excessively wet or may cause water to enter the product. 3. To better use this productplease avoid the front and side of the lens close to the glass, white wall and other reflective objects, in order to avoid the picture is bright near and dark in the distance or whitish. 4. Please ensure that this product is installed within the range of Wi-Fi signal coverage, and placed as far as possible in a location with better Wi-Fi signal, and try to install it far away from the microwave oven or other locations that may affect the signal.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Documents / Resources
 | Ausek ASA9 High Definition Network Camera [pdf] User Manual AS-A9, ASA9 High Definition Network Camera, ASA9, High Definition Network Camera, Network Camera, Camera |