audio-technica ATR1300x Unidirectional Vocal Microphone

IMPORTANT  INSTRUCTION

1. Plug XLR cable into the microphone.
2. Confirm that audio device is turned OFF
3.  Plug microphone cable into 1/4″ mic input on your karaoke machine, powered speaker, or another audio device.
4. Turn ON audio device.
5.  Turn ON microphone using ON/OFF switch.

STAND CLAMP

Tips

• When using the microphone for vocals, sing or speak across the mic windscreen rather than directly into the mic to reduce popping caused by sudden breath blasts. To prevent feedback, hold or position the mic tairly close to the sound source (i.e., mouth), but refrain from overcrowding the mic.
• The mic should always be located behind or aimed away from the loudspeaker to minimize pickup of loudspeaker’s sound (feedback).

Documents / Resources

audio-technica ATR1300x Unidirectional Vocal Microphone [pdf] User Guide ATR1300x, Unidirectional Vocal Microphone, ATR1300x Unidirectional Vocal Microphone, Vocal Microphone, Microphone

References

• User Manual