Astro a10 GAMING HEADSET

INSTALLATION

• FLIP-TO-MUTE MICROPHONE
  
• VOLUME WHEEL
• INLINE VOLUME CONTROL CABLE

INSTALLATION SETUP

PC/MAC SETUP

1. Plug the grey end of the Inline Volume Control Cable into the headset.
2. Plug the black end of the Inline Volume Control Cable into the PC headphone jack.
3. Adjust the volume setting using the Inline Volume Control Cable.
4. If the PC sound card has split pink and green jacks, a PC splitter is required (purchase from astrogaming.com).

Xbox ONE SETUP

1. Plug the grey end of the Inline Volume Control Cable into the headset.
2. Plug the black end of the Inline Volume Control Cable into the Xbox One controller.
3. Adjust the volume setting using the Inline Volume Control Cable.
4. Double-tap the Xbox button on the controller, then navigate to Settings and adjust as needed.
5. If the controller has no headset jack, we recommend adding an ASTRO MixAmp M60 or MixAmp M80.

ps4 SETUP

1. Plug the grey end of the Inline Volume Control Cable into the headset.
2. Plug the black end of the Inline Volume Control Cable into the PS4 controller.
3. Adjust volume setting using the Inline Volume Control Cable.
4. Press and hold the PS4 button on the controller and adjust settings under Sound/Devices as needed.

Mobile setup

1. Plug the grey end of the Inline Volume Control Cable into the headset.
2. Plug the black end of the Inline Volume Control Cable into the headphone jack on the device.
3. Adjust volume setting using the Inline Volume Control Cable.
4. Adjust device settings for voice and game volume.

References

• User Manual