NUC-1360P/D4
NUC-1340P/D4
NUC-1365UE/D4
NUC-1335UE/D4
NUC-1315UE/D4
NUC-1315U/D4

Jumpers and Headers Setting Guide

The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Revision History

1. M.2 Key-M Socket (M2_M1)
   

   Pin	Signal	Signal	Pin
   1	GND	+3.3V	2
   3	GND	+3.3V	4
   5	PERn3	NC	6
   7	PERp3	NC	8
   9	GND		10
   11	PETn3	+3.3V	12
   13	PETp3	+3.3V	14
   15	GND	+3.3V	16
   17	PERn2	+3.3V	18
   19	PERp2	NA	20
   21	GND	NA	22
   23	PETn2	NA	24
   25	PETp2	NA	26
   27	GND	NA	28
   29	PERn1	NA	30
   31	PERp1	NA	32
   33	GND	NA	34
   35	PETn1	NA	36
   37	PETp1		38
   39	GND	NA	40
   41	PERn0	NA	42
   43	PERp0	NA	44
   45	GND	NA	46
   47	PETn0	NA	48
   49	PETp0	PERST#	50
   51	GND	CLKREQ#	52
   53	PEFCLKn	WAKE#	54
   55	PEFCLKp	NA	56
   57	GND	NA	58
   67	NA	NA	68
   69	PEDET	+3.3V	70
   71	GND	+3.3V	72
   73	GND	+3.3V	74
   75	GND

2. M.2 Key-E Socket (M2_E1)
   

   Pin	Signal	Signal	Pin
   1	GND	+3.3V	2
   3	USB_D+	+3.3V	4
   5	USB_D-	NA	6
   7	GND	NA	8
   9	CNV_WGR_D1-	CNV_RF_RESET	10
   11	CNV_WGR_D1+	NA	12
   13	GND	MODEM_CLKREQ	14
   15	CNV_WGR_D0-	NA	16
   17	CNV_WGR_D0+	GND	18
   19	GND	NA	20
   21	CNV_WGR_CLK-	CNV_BRI_RSP	22
   23	CNV_WGR_CLK+
   33	GND	CNV_BGI_DT	32
   35	PETp	CNV_RGI_RSP	34
   37	PETn	CNV_BRI_DT	36
   39	GND	NA	38
   41	PERp	NA	40
   43	PERn	NA	42
   45	GND	NA	44
   47	PEFCLKp	NA	46
   49	PEFCLKn	NA	48
   51	GND	SUSCLK	50
   53	CLKREQ#	PERST0#	52
   55	WAKE#	W_DISABLE1#	54
   57	GND	W_DISABLE2#	56
   59	CNV_WT_D1-	NA	58
   61	CNV_WT_D1+	NA	60
   63	GND	NA	62
   65	CNV_WT_D0-		64
   67	CNV_WT_D0+	NA	66
   69	GND	NA	68
   71	CNV_WT_CLK-	NA	70
   73	CNV_WT_CLK+	+3.3V	72
   75	GND	+3.3V	74

3. USB 2.0 Connector (USB2_7_8)
   

   Pin	Signal Name	Signal Name	Pin
   1	USB_PWR	USB_PWR	2
   3	-A	-B	4
   5	+A	+B	6
   7	GND	GND	8
   9	DUMMY		10

   

4. COM Port Header (COM1) (RS-232/422/485)
   

   Pin	Signal Name	Signal Name	Pin
   1	DDCD#1	RRXD1	2
   3	TTXD1	DDTR#1	4
   5	GND	DDSR#1	6
   7	RRTS#1	CCTS#1	8
   9	RRI#1		10

   
   • This motherboard supports RS232/422/485 on COM1 port. Please refer to the table below for the pin definition. In addition, COM1 port (RS232/422/485) can be adjusted in BIOS setup utility > Advanced Screen > Super IO Configuration. You may refer  to our manual for details.
   COM1 Port Pin Definition

   Pin	RS232	RS422	RS485
   1	DCD	TX-	RTX-
   2	RXD	RX+	N/A
   3	TXD	TX+	RTX+
   4	DTR	RX-	N/A
   5	GND	GND	GND
   6	DSR	N/A	N/A
   7	RTS	N/A	N/A
   8	CTS	N/A	N/A
   9	N/A	N/A	N/A

5. Audio Jack (AUDIO1)
6. USB4/Thunderbolt™ 4 Type-C Port (TC_T0)
7. USB 3.2 Gen2 Ports (USB3_3_4)
8. SATA3 Port (SATA3_0)
   

   Pin	Signal Name
   1	GND
   2	SATA0_TXP
   3	SATA0_TXN
   4	GND
   5	GND
   6	SATA0_RXN
   7	SATA0_RXP
   8	GND
   9	GND
   10	GND
   11	NC
   12	+5V
   13	+5V
   14	+5V
   15	+5V
   16	+5V
   17	NC
   18	GND
   19	GND
   20	GND

   

9. JP1
   1-2 : SIO AT Mode (Default Open: SIO ATX Mode)
   4-6 : Clear CMOS
   3-4 : Auto Clear CMOS
   5-7 : DACC** Auto clear CMOS when system boot improperly.
10. USB3/DP Type-C Port (TC_UD1)
11. System Panel Header (PANEL1)
    

    Pin	Signal Name	Signal Name	Pin
    1	HDLED+	PLED+	2
    3	HDLED-	PLED-	4
    5	GND	PWRBTN#	6
    7	RESET#	GND	8
    9	DUMMY		10

    

12. DC-In Jack (DC_IN1)
13. USB 3.2 Gen2 Ports (USB3_1_2)
14. Top : DisplayPort (DP1) Bottom : HDMI Port (HDMI1)
15. RJ-45 LAN Port (LAN2)
16. RJ-45 LAN Port (LAN1)Back Side :
17. Power Button (PWR_BTN1)
    
18. Fan Connector (FAN1)
    

    Pin	Signal Name
    1	GND
    2	+5V
    3	FAN_SPEED
    4	FAN_SPEED_CONTROL

    

19. Battery Connector (BAT1)
    

    Pin	Signal Name
    1	+BAT
    2	GND

    

20. ESPI Connector (ESPI1)
    

    Pin	Signal Name
    1	GND
    2	ESPI_CLK
    3	GND
    4	ESPI_CS#
    5	ESPI_RESET#
    6	GND
    7	+3V
    8	GND
    9	SMB_CLK
    10	SMB_DATA
    11	ESPI_IO0
    12	ESPI_IO1
    13	ESPI_IO2
    14	ESPI_IO3
    15	GND
    16	+3VSB
    17	Internal Use
    18	Internal Use
    19	ESPI_ALERT#
    20	GND

    

Installation of ROM Socket

* Do not apply force to the actuator cover after ic inserted.
* Do not apply force to actuator cover when it is opening over 120 degree, Otherwise, the actuator cover may be broken.

* The yellow dot (Pin1) on the ROM must be installed at pin1 position of the socket.
* Make sure the white dot on the ROM is installed outwards of the socket.
* For further details of how to install ROM, please refer to ASRI website.
Warning: If the installation does not follow as the picture, then it may cause severe damage to chipset & MB.

Documents / Resources

ASRock NUC-1360P-D4 High Definition Multimedia Interface [pdf] Installation Guide NUC-1360P-D4, NUC-1340P-D4, NUC-1365UE-D4, NUC-1335UE-D4, NUC-1315UE-D4, NUC-1315U-D4, NUC-1360P-D4 High Definition Multimedia Interface, High Definition Multimedia Interface, Definition Multimedia Interface, Multimedia Interface, Interface

References

• User Manual