HF23ACTB Coffee Table
Installation Guide
HF23ACTB Coffee Table
Model: HF23ACTB
Attention: First o all, put a piece of carton or rug on the floor, then begin to install the panels, so as to prevent the parts from scratch.
STEP# I Find 4 Rounded Bars (part 2) and screw 4 dowel pin bolts (part A) in each of them.
STEP #2 Insert 2 wood dowel pins (part C) into each side of panel 5 & 6
STEP #3 Insert 2 wood dowel pins into each side of panel 3 & 4, and 2 wood dowel pins into top of panel 4. 
STEP #4 Put rounded bars (part 2) and panel 3-6 together. 
STEP #5 Put 16 cam bolt nuts (part B) inside the holes on panel 3-6, then screw to lock them.
STEP #6 Find panel 9 and screw 5 dowel pin bolts (part A) into it. 
STEP #7 Place panel 8 and panel 9 together and align them. 
STEP #8 Tum the assembled table frame (step 5) upside down then Fit it on panel 8 & 9.
STEP #9 Put 5 cam bolt nuts (part B) inside the holes on panel 4&5&6, then screw to lock them.
STEP #10 Prepare two lift mechanisms and align them with pre-drilled holes on panels.
STEP # 11 Find IO m5 screws and fasten lift mechanisms to the panel 5 &6& 8.
STEP # 12 Find panel 7 and screw IO dowel pin bolts (part A) into it. 
STEP# 13 Fit panel 7 onto table frame, align the bolts and pins carefully.
STEP# 14 Fasten 4 solid wood legs on to pre-assembled metal plates on panel 7
STEP #15 Hold the lifetable side (Panel 8) and carefully flip the coffee table. 
STEP #16 Lift the tabletop, put 10 cam bolt nuts (part 8) inside the holes on panel 3-6, then screw to lock them.
STEP #17 Place metal bar (Part I 0) between two lift mechanisms, fasten two m6 screws (part F) into it. 
STEP # I 8 (Optional) Put 31 white stickers (Part D) on the cam bolt nuts to cover them. Then you are all set! 
HF23ACT
Documents / Resources
 | ASPVO HF23ACTB Coffee Table [pdf] Installation Guide HF23ACTB Coffee Table, HF23ACTB, Coffee Table, Table |