Aspen LIT5294A DuAlign OA Hinged Knee Belt Instructions

LIT5294A DuAlign OA Hinged Knee Belt

Product Information

Specifications:

  • Product Name: DuAlign OA
  • Type: Knee Brace
  • Features: Fasteners, Hinge, Shin Strap

Product Usage Instructions

Preparation:

  1. Before applying the brace, ensure all fasteners are open by
    pressing the button on the side of the fastener.
  2. When seated, bend your knee joint slightly (approximately 30
    degrees).

Placement & Adjustment:

Position your brace on your leg so that the middle of the hinge
lines up with the center of your patella.

Tightening:

  1. Close the fasteners starting with the lower shin strap labeled
    1.
  2. Adjust and tighten the strap to your level of comfort.
  3. Continue closing the fasteners following the order sequence 2,
    3, 4.
  4. Make sure to adjust the straps at each step.

Removing the Brace:

To remove the brace, press and release the fasteners until all
of the straps are released.

FAQ

Q: How do I know if the brace is fitted correctly?

A: Ensure that the middle of the hinge aligns with the center of
your patella and that the straps are comfortably tightened around
your leg.

Q: Can I wear the brace during physical activities?

A: The DuAlign OA brace is designed to provide support during
physical activities. Make sure it is securely fastened before
engaging in any strenuous activity.

“`

How to Apply the DuAlign OA

1

2

A.

B.
30°
PREPARATION A. Before applying the brace, ensure all fasteners are open by pressing the button on the side of the fastener. B. When seated, bend your knee joint slightly (approximately 30 degrees)
3

PLACEMENT & ADJUSTMENT Position your brace on your leg so that the middle of the hinge lines up with the center of your patella.
4

TIGHTENING
Close the fasteners starting with the lower shin strap labeled 1. Adjust and tighten the strap to your level of comfort. Continue closing the fasteners following the order sequence 2,3,4. Make sure the adjust the straps at each step.

REMOVING THE BRACE: To remove the brace, press and release the fasteners until all of the straps are released.

© 2025 Aspen Medical Products, LLC All rights reserved 6481 Oak Canyon, Irvine, CA 92618-5202, USA · 800-295-2776 949-681-0200 aspenmp.com Pat. aspenmp.com/patents LIT5294A 06/25

SCAN WITH YOUR PHONE
CAMERA

Documents / Resources

Aspen LIT5294A DuAlign OA Hinged Knee Belt [pdf] Instructions
LIT5294A DuAlign OA Hinged Knee Belt, LIT5294A, DuAlign OA Hinged Knee Belt, Hinged Knee Belt, Knee Belt

References

Leave a comment

Your email address will not be published. Required fields are marked *