ASiNG A9 SE Multi Functional Demonstration Controller User Manual

ASiNG A9 SE Multi Functional Demonstration Controller

Product Overview

The A9 SE Presenter is a multi-functional demonstration controller that integrates laser pointer, PPT page turning, Bluetooth/2.4G dual-mode control, time display, and battery level display. It features a Type-C charging port and supports long-distance control up to 100 meters, making it ideal for meetings, teaching, speeches, and other scenarios.

Button Functions & Screen Display

Operating Instructions

Power On & Sleep Mode
There is no physical power switch. If there is no operation for 20 minutes, the device automatically enters sleep mode for low power consumption. Press any key to wake it up and resume page turning.

Bluetooth Pairing Steps

1. Trigger Pairing
   Long press the [ Previous Page) button for 3 seconds to enter Bluetooth mode. The Bluetooth icon on the screen will turn red, entering a l-minute waiting status.
2. Device Search
   Open the Bluetooth settings on your phone or computer, search for the device named “A9 SE”, and click to connect.
3. Pairing Success
   The screen will return to the main time interface, and the Bluetooth icon will stay solid.

Helpful Tip: After entering Bluetooth mode, only Bluetooth-based page turning is supported. Time sync is not available in Bluetooth mode.

 USB Receiver Pairing Steps 

1. Enter Pairing Mode:
   Press and hold [ Loser Button + Previous Page+ Next Page] simultaneously for 3 seconds to enter the USB receiver pairing state.
2. Connect Receiver:
   Insert the USB receiver into the computer’s USB port.
3. Pairing Success
   The presenter screen will automatically sync and display the computer’s time, along with battery percentage and USB icon. (Time auto-sync works on both Windows and macos).

Time Calibration Steps
(Windows only; For mocOS: time auto-syncs on USB pairing, no manual calibration needed)

1.  Prerequisite:
   Insert the USB receiver into the computer’s USB port.
2. Trigger:
   Press and hold [Previous Page+ Next Page] simultaneously for 3 seconds.
3. After your computer automatically opens the time calibration webpage, click “SYNC TIME”.
4. After the pop-up window appears, click “Wireless Receiver”.
   Click ‘Connect” to calibrate the time.
5. When you see connected Time sync successful”, it means the calibration has been successful.

Charging Status Description

• Charging:
  The battery icon displays a dynamic animation.
• Fully Charged:
  The battery icon remains solid green.

Technical Specifications

Transmitter

• Emission Frequency: Bluetooth
• Battery Type: Lithium Battery
• Working Current: <300mAh

Receiver

• Compatible Systems: Windows 11/10/8/7, macOS
• Compatible standards: USB1.1/2.0/3.0
• Operating voltage: DC 4.5V ~ 5.5V

Package Contents

• A9 SE Presenter (Transmitter) x 1
• USB Receiver x 1
• Type-C Charging Cable x 1
• User Manual x 1
• Packaging box x1
• storage bag x1

You can visit the official ASiNG website (https://asingshop.com/) and go to the “Service Support-FAQ” section to download the latest electronic manual. If you need more support or detailed product information, please feel free to call the ASiNG official hotline at 0755-27781846.

We are dedicated to serving you!
Please note that the company assumes no responsibility for any computer hardware or software damage or data loss that may result from the use of this product. Any data storage product carries the risk of data loss. It is recommended that when using ASiNG USB flash drive products, you make multiple backups of important data. If the product has quality issues, official after-sales service will provide a replacement service, but this service does not include data recovery, and the company does not bear the recovery costs or related responsibilities for lost data.

https://asingshop.com/

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Safety Warning

The product contains a lithium battery. Disassembly, impact, crushing, or throwing it into fire is prohibited. If severe swelling occurs, please stop using it. Do not place the product in high-temperature environments or immerse it in water.

Note: When charging this product, please ensure you use a power adapter that meets relevant safety standards or is CCC certified. If the product will not be used for a long time, please turn it off after a full charge and store it in a cool, dry place. It is recommended to charge it at least once every six months to ensure proper battery function and lifespan.

Product Usage Warning

Laser is harmful to human eyes. Avoid beam exposure. Do not aim the laser at eyes or look directly at it. Not suitable for children under 14 years old. Please keep this product away from children.

Do not stare at the laser	Presentation Remote
	Output wavelength : 500 nm ~ 552 nm Output power : < 1mw