Introduction
The LELO F1S V3 is an advanced device designed for personal use. It incorporates sonic wave technology and dual motors to provide a unique experience. The device features a flexible liquid silicone sleeve and can be connected to a smartphone application for enhanced control and additional modes, including an AI interactive mode.
Image: The LELO F1S V3 device, its retail packaging, and the companion mobile application.
Package Contents
Verify that all items listed below are included in your package:
- LELO F1S V3 Pleasure Console
- USB Charging Cable
- User Manual (this document)
- Warranty Registration Card
- Moisturizer Sachet (water-based lubricant)
Image: The LELO F1S V3 device, USB charging cable, user manual, warranty card, and a moisturizer sachet.
Features
- Flexible Liquid Silicone Sleeve: An insertable length of 110 mm (4.3 in) and girth of 40mm-60mm (1.57 in - 2.36 in). The flexible ribs are designed for comfort.
- App Connectivity: Connects via Bluetooth to a smartphone application, unlocking additional modes and an AI interactive mode.
- Sensonic & Cruise Control Technology: Delivers sonic waves from all sides. Cruise Control technology maintains consistent intensity.
- Dual Motors: Two synchronized motors stimulate nerve endings.
- AI Interactive Mode: Available in the LELO app, this mode adjusts intensity and vibration patterns in response to movement.
- Responsive Sensors: Provides performance feedback on speed, stamina, and skill.
- 8 Powerful Settings: Offers a range of vibration patterns.
- 100% Waterproof: Suitable for use in baths and showers.
Image: A visual breakdown of the LELO F1S V3's core features and internal design.
Setup and First Use
- Initial Charge: Before first use, fully charge your F1S V3 for 2 hours. Connect the USB charging cable to the device and a USB power source. The LED lights will indicate charging status.
- Cleaning: Clean the device thoroughly before and after each use. Refer to the "Maintenance and Cleaning" section for detailed instructions.
- Lubrication: Apply a generous amount of water-based lubricant to the internal sleeve of the F1S V3.
Image: Key operational details: 2-hour charge/use time, 5-second hold for travel lock, 90-day standby, and 100% waterproof design.
Operating Instructions
- To Turn On: Press and hold the power button for 3 seconds.
- To Switch Modes: Press the power button briefly to cycle through the available vibration modes.
- Adjust Intensity: Use the '+' and '-' buttons to increase or decrease the vibration intensity. The LED lights will indicate the current level.
- To Turn Off: Press and hold the power button for 3 seconds.
Image: Step 1: Preparation, illustrating the application of lubricant.
Image: Step 2: Engagement, demonstrating how to use the device.
Image: Step 3: Indulgence, depicting exploration of settings and modes.
App Connection
The LELO F1S V3 can be connected to the LELO smartphone application via Bluetooth for extended control and features.
- Download the LELO app from your device's app store.
- Ensure Bluetooth is enabled on your smartphone.
- Turn on your F1S V3 device.
- Open the LELO app and follow the on-screen instructions to pair your device.
- Once connected, you can access additional modes, customize settings, and utilize the AI interactive mode.
Image: The LELO F1S V3 and its companion app, illustrating app connectivity.
Maintenance and Cleaning
Proper maintenance ensures the longevity and hygiene of your LELO F1S V3.
- Cleaning: Clean the device thoroughly before and after each use. Wash the silicone sleeve with warm water and a mild, antibacterial soap. Rinse thoroughly.
- Drying: Allow the device to air dry completely or gently pat dry with a lint-free cloth.
- Storage: Store the F1S V3 in a clean, dry place, away from direct sunlight and extreme temperatures.
- Lubricant Compatibility: Only use water-based lubricants with the F1S V3. Oil-based lubricants can damage the silicone material.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Battery is depleted. | Charge the device for 2 hours using the provided USB cable. |
| Device does not connect to the app. | Bluetooth is off, device is off, or app issue. | Ensure Bluetooth is enabled on your phone, the F1S V3 is turned on, and the LELO app is updated. Try restarting both the device and the app. |
| Vibrations are weak or inconsistent. | Low battery or incorrect mode/intensity setting. | Recharge the device. Adjust the intensity using the '+' button or try a different mode. |
| Travel lock is engaged. | Device is locked to prevent accidental activation. | Hold the '+' and '-' buttons simultaneously for 5 seconds to unlock. |
Specifications
- Model Name: F1S V3
- Item Model Number: 12000
- Material: Silicone
- Color: Teal
- Product Dimensions: 5.67 x 2.83 x 1.97 inches (144 x 72 x 50 mm)
- Weight: 1.06 Pounds (480g)
- Insertable Length: 110 mm (4.3 in)
- Girth: 40mm-60mm (1.57 in - 2.36 in)
- Battery: 1 Lithium Ion battery (included)
- Charging Time: 2 hours
- Use Time: Up to 2 hours
- Standby Time: Up to 90 days
- Waterproof: 100% waterproof
Warranty and Support
Your LELO F1S V3 comes with a warranty. Please refer to the included Warranty Registration Card for details on how to register your product and the terms of the warranty.
For technical support, product inquiries, or warranty claims, please visit the official LELO website or contact their customer service directly. Contact information can typically be found on the LELO website or on the product packaging.
Note: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is intended for adult use only.