1. Introduction
The Aquaguard Enrich Superio ROUVCASS 2X 2AB Water Purifier is designed to provide purified drinking water through an advanced 11-stage purification process. This system integrates Reverse Osmosis (RO) and Ultraviolet (UV) e-boiling technologies to ensure water safety. It features Copper+Alkaline technology, a durable stainless steel tank, and Nanopore Long Life Filters for effective contaminant removal. The purifier also includes a mega sediment filter, water-saving technology with over 40% recovery, a 5-liter storage capacity, and LED indicators for tank fill and service status. An integrated TDS meter allows for convenient water quality checks.
2. Setup and Installation
The Aquaguard Enrich Superio Water Purifier is designed for countertop installation. Professional installation by a qualified technician is recommended to ensure proper setup and optimal performance.
2.1. Unpacking
Carefully unpack the water purifier and all its components. Ensure all items listed in the 'What's in the Box' section are present.
2.2. What's in the Box
- Aquaguard Enrich Superio Water Purifier Unit
- Installation Kit
2.3. Placement
Place the unit on a stable, flat countertop surface, away from direct sunlight and heat sources. Ensure adequate space around the unit for ventilation and maintenance access.
3. Operating Instructions
The Aquaguard Enrich Superio Water Purifier is designed for ease of use, providing purified water on demand.
3.1. Initial Use
- After installation, ensure the power supply is connected and the water inlet valve is open.
- Allow the storage tank to fill completely. The LED indicators will show the tank fill status.
- For the first use, dispense and discard approximately 2-3 liters of water to flush the system and new filters.
3.2. Dispensing Water
To dispense purified water, place a container under the faucet and operate the dispenser lever or button as indicated on the unit.
3.3. Water Saving Technology
This purifier incorporates water-saving RO technology, achieving over 40% water recovery during the purification process.
3.4. TDS Meter
The integrated TDS meter allows you to check the Total Dissolved Solids level of the purified water, providing an indication of water quality.
3.5. Suitable Water Sources
The purifier is suitable for various water sources, including borewell water, municipal water, and tanker water, with a maximum supported TDS level of 2000 PPM.
4. Maintenance
Regular maintenance ensures the longevity and efficiency of your Aquaguard Enrich Superio Water Purifier.
4.1. Filter Life and Replacement
The Nanopore Long Life Filters are designed for a filter life cycle of up to 2 years or 12,000 liters, whichever comes first. Timely replacement of filters is crucial for maintaining purification effectiveness. The unit features LED indicators for service reminders.
4.2. Tank Cleaning
The stainless steel tank is designed for durability and hygiene. Periodically, the tank should be cleaned by a service technician to prevent accumulation of deposits.
4.3. Free Service Plan
For the first year of ownership, a free service plan is provided, which includes:
- Free Installation
- 2 Free Cleaning Visits
- Unlimited Repair Visits
5. Troubleshooting
If you encounter issues with your water purifier, please refer to the following general troubleshooting steps. For complex problems, contact customer support.
5.1. No Water Dispensing
- Check if the power cord is securely plugged into a working outlet.
- Ensure the main water supply valve to the purifier is open.
- Verify that the storage tank is not empty. Wait for it to fill if necessary.
- Check for any error indicators on the LED display.
5.2. Slow Water Flow
- Ensure the water inlet pressure is adequate (within the operating pressure range).
- Filters may be nearing the end of their life cycle and require replacement. Refer to the service indicators.
5.3. Unusual Noise
- Some operational noise is normal during purification.
- If the noise is excessive or unusual, ensure the unit is placed on a stable surface. Contact support if the noise persists.
6. Specifications
| Feature | Specification |
|---|---|
| Brand | Aquaguard |
| Model Name | Enrich Superio ROUVCASS 2X 2AB |
| Model Number | GWPDESRUC0002X |
| Product Dimensions (L x W x H) | 48L x 32W x 32H Centimeters |
| Item Weight | 11 Kilograms |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Capacity | 5 Liters |
| Installation Type | Countertop |
| Purification Method | Reverse Osmosis, Ultraviolet |
| Power Source Type | Corded Electric |
| Maximum Flow Rate | 24 Liters Per Hour |
| Operating Pressure Range | Upto 3 Kilograms Per Square Centimeter |
| Supported Water TDS Level Maximum | 2000 PPM |
| Water Saving Percentage | 40.0% |
| Filter Life Cycle | 2 Years |
| Lower Temperature Range | 5 Degrees Celsius |
| Upper Temperature Rating | 45 Degrees Celsius |
7. Warranty Information
The Aquaguard Enrich Superio Water Purifier comes with the following warranty:
- Product Warranty: 1 year on the product.
- Filter Life Warranty: 2 years or 12,000 liters, whichever comes first.
Please retain your purchase receipt for warranty claims.
8. Support and Contact
For any assistance, service requests, or inquiries regarding your Aquaguard Enrich Superio Water Purifier, please contact the manufacturer:
Manufacturer:
Eureka Forbes Limited (Formerly Forbes Enviro Solutions Limited)
Registered Office Address: B1/B2, 701, 7th Floor, Marathon Innova, Off. Ganpatrao Kadam Marg, Lower Parel (West), Mumbai, Maharashtra – 400013
Manufacturing Unit: Lal Tapper Industrial Area, Majri Grant, Dehradun, Uttrakhand-248140
Please refer to the product packaging or official Aquaguard website for the most current contact information, including customer service numbers and email addresses.