Pyniro ZX-US-FY2YT14-A

Pyniro 10.6-inch Single DIN Car Stereo User Manual

Model: ZX-US-FY2YT14-A

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Pyniro 10.6-inch Single DIN Car Stereo. Please read this manual thoroughly before use to ensure proper functionality and to prevent damage.

Pyniro 10.6-inch Single DIN Car Stereo with rotatable touchscreen

Image 1.1: Pyniro 10.6-inch Single DIN Car Stereo with rotatable touchscreen and physical controls.

2. Setup and Installation

2.1 Package Contents

Verify that all components are present in the package:

  • 10.6-inch Single DIN Car Stereo Unit
  • 4G Antenna
  • Rearview Camera Video Input Cable (RCA)
  • GPS Antenna
  • RCA Cable
  • USB Cables (x2)
  • External Microphone
  • Power Cable (Universal ISO Harnesses)
  • Mounting Brackets
  • Installation Tools (Screwdriver, Pry Tool)
Included components for Pyniro car stereo installation

Image 2.1: All components included in the package for installation.

2.2 Compatibility and Pre-Installation

This car stereo is designed for universal 1DIN dashboards. The reinforced metal chassis measures 178x50mm. Ensure your vehicle's dashboard slot is a standard 1DIN size. If your car's dashboard slot is 2DIN, this radio will not fit.

Comparison of car dashboard before and after installation, showing 1DIN compatibility

Image 2.2: Visual guide for 1DIN compatibility and dimensions (178mm x 50mm).

2.3 Wiring Connections

The package includes universal ISO harnesses. Connect the wires according to their definitions to avoid short circuits or power consumption issues. Refer to the wiring diagram below.

Detailed wiring diagram for the car stereo connections

Image 2.3: Connection instructions showing the rear panel of the stereo and wiring harness details.

Important Note: The backup camera harness must be installed even if you do not plan to use a backup camera, as it contains the Bluetooth and Wi-Fi antennas.

2.4 Antenna Installation

  • GPS Antenna: Position the GPS antenna outside the glove box for optimal signal performance.
  • 4G Antenna: Attach the included external 4G antenna to the designated port.
GPS navigation display and GPS antenna installation tip

Image 2.4: GPS navigation display and recommended GPS antenna placement.

2.5 Steering Wheel Control (SWC) Setup

To enable multifunction steering wheel controls:

  1. Identify your vehicle’s original SWC wires (typically labeled SWC or Steering Wheel Control).
  2. Connect these wires directly to the radio’s KEY1 and KEY2 ports on the ISO power adapter using crimp connectors.

Important Compatibility Note: This unit does not include a built-in CAN Bus decoder. If your car requires a CAN Bus interface to retain steering wheel controls, you will need to purchase an external CAN Bus decoder separately.

Steering wheel control interface on the car stereo

Image 2.5: Steering wheel control compatibility information.

2.6 4G SIM Card Setup

For 4G LTE connectivity:

  1. Insert a 4G SIM card into the dedicated slot on the 4G antenna module.
  2. Attach the external 4G antenna to the stereo unit.
  3. Network activation should be instant without requiring a driver reset.
4G SIM card and antenna setup guide

Image 2.6: Instructions for 4G SIM card and antenna installation.

3. Operating Instructions

3.1 Rotatable Touchscreen and Controls

The 10.6-inch IPS touchscreen (1280x720 resolution) can be adjusted for vertical or horizontal rotation to suit your viewing preference and avoid glare. The exclusive metal rotary dial provides precise control for volume, zoom, and navigation without diverting attention from the road. The screen features anti-glare technology for daytime visibility and automatic brightness adjustment.

Rotatable touchscreen demonstration and physical controls

Image 3.1: Demonstration of the rotatable touchscreen and physical control knob.

3.2 Android 13 Operating System

The stereo runs on the Android 13 operating system, offering enhanced security, customization, and compatibility. With 64GB of internal storage (expandable via USB), it can run multiple applications simultaneously without significant lag, supported by its 8-core processor and 4GB RAM.

3.3 Wireless CarPlay and Android Auto

Connect your smartphone wirelessly to access navigation, music, calls, and messages directly on the HD display. Use voice assistants like Siri or Google Assistant for hands-free control.

Wireless CarPlay and Android Auto interfaces

Image 3.2: Wireless CarPlay and Android Auto interfaces with voice command examples.

3.4 Split-Screen Display

Utilize the split-screen mode to display two applications simultaneously, such as navigation on one side and a rearview camera feed on the other. The IPS screen offers a 60Hz refresh rate for clear visuals.

3.5 Connectivity Features

  • Bluetooth 5.2: For streaming music and hands-free calls with aptX HD for lossless audio.
  • Dual-band Wi-Fi (2.4GHz/5GHz): For internet access and downloading updates.
  • 4G LTE: Supports 4G SIM cards for independent internet and call functionality. Dual-antenna technology ensures stable signals.
  • GPS: Built-in GPS for navigation with support for online map applications.

3.6 Audio Features

The stereo includes FM/AM radio with RDS, an Equalizer (EQ), Audio Sound Processor (ASP), Digital Signal Processor (DSP), and Bass Boost functions. These features allow for customization of audio output to personal preferences.

Bluetooth call interface and FM/RDS/EQ/DSP settings

Image 3.3: Bluetooth music and call interface, along with FM/RDS and audio adjustment settings.

3.7 Rearview Camera Support

The unit supports aftermarket rearview cameras (not included) via an RCA connector. When reversing, the camera feed will automatically activate, and parking assistance lines will be provided.

Rearview camera display on the car stereo screen

Image 3.4: Integrated rearview camera display with parking guidelines.

4. Maintenance

To maintain the performance and appearance of your car stereo, follow these guidelines:

  • Cleaning the Screen: Use a soft, lint-free cloth to gently wipe the touchscreen. For stubborn smudges, slightly dampen the cloth with water or a screen-safe cleaner. Avoid harsh chemicals or abrasive materials.
  • General Cleaning: Keep the unit and surrounding dashboard area free of dust and debris. Use a soft brush or compressed air for hard-to-reach areas.
  • Software Updates: Periodically check for available software updates through the system settings to ensure optimal performance and access to new features.

5. Troubleshooting

ProblemPossible CauseSolution
No powerIncorrect wiring, blown fuseCheck power cable connections (B+, ACC, GND). Verify vehicle fuses.
No Bluetooth/Wi-Fi signalBackup camera harness not connectedEnsure the backup camera harness is connected, as it houses the Bluetooth and Wi-Fi antennas.
Steering Wheel Controls not workingIncorrect wiring, CAN Bus requiredVerify KEY1/KEY2 wire connections. If your vehicle requires a CAN Bus, an external decoder is needed.
Android Auto not connecting (some phones)Cell phone version/brand operator incompatibilityContact your cell phone brand operator to confirm Android Auto compatibility.
Slow response from touchscreenSystem processing multiple tasksWhile the 8-core processor is efficient, occasional minor delays may occur during heavy multitasking. This is normal operation.
Poor audio quality (thin/tinny)Basic built-in amplificationThe built-in amplifier is basic. For enhanced audio, consider pairing the unit with an external amplifier. Utilize the DSP and EQ settings for fine-tuning.
Accessing Factory SettingsAdvanced configurationThe passcode for the factory settings page is 3368. Use with caution.

6. Specifications

FeatureDetail
BrandPyniro
Model NumberZX-US-FY2YT14-A
Screen Size10.6 Inches
Screen Resolution1280x720 IPS
Operating SystemAndroid 13
Processor8-Core (UIS8581A @1.6GHz)
RAM4GB
Internal Storage (ROM)64GB
ConnectivityBluetooth 5.2, Dual-band Wi-Fi (2.4GHz/5GHz), 4G LTE (SIM card support)
NavigationBuilt-in GPS
Smartphone IntegrationWireless CarPlay, Wireless Android Auto
Audio Output ModeStereo
Output Power4x45W
Radio TunerFM (87.5MHz-108.0MHz), AM (522KHz-1620KHz), RDS
Special FeaturesRotatable Touchscreen, Split-Screen, Customizable RGB Backlighting, DSP, EQ, Bass Boost, Steering Wheel Control Support, Rearview Camera Input
Compatible DevicesSmartphone
UPC708500306065

7. Warranty and Support

7.1 Warranty Information

This product comes with a 2-year warranty. Component repair or replacement is available in all cases of manufacturing defects or malfunctions under normal use.

7.2 Technical Support

Pyniro offers technical support for this product. For assistance, please contact our support team via email or through our online platform. Personalized support is available to help with any queries or issues you may encounter.

© 2023 Pyniro. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.