BRAWHOOH E CQ006 Portable Tire Inflator Air Compressor

1. Important Safety Instructions

Please read all instructions carefully before using this product. Failure to follow these instructions may result in product damage, property damage, or personal injury.

• Keep the device away from children. This is not a toy.
• Do not operate the inflator in wet conditions or near flammable liquids or gases.
• Ensure the air hose is securely attached to the valve stem before inflation to prevent air leakage or hose detachment.
• Do not over-inflate. Always refer to the recommended pressure for the item being inflated.
• The air hose and nozzle may become hot during prolonged use. Avoid direct contact with skin.
• Do not leave the inflator unattended while in operation.
• Store the device in a cool, dry place when not in use.
• Use only the provided charging cable and accessories.

2. Product Overview

The BRAWHOOH E CQ006 Portable Tire Inflator is a compact, cordless air compressor designed for inflating various items such as car tires, motorcycle tires, bicycle tires, and sports balls. It features a digital display, preset inflation modes, automatic shut-off, and an LED light.

Package Contents:

• BRAWHOOH E CQ006 Portable Tire Inflator
• Air Hose
• Needle Valve Adapter (for balls)
• Presta Valve Adapter (for some bicycles)
• USB Charging Cable
• User Manual

Device Components:

Refer to the image below for a visual representation of the device's main components.

Image: Front view of the BRAWHOOH E CQ006 portable tire inflator, highlighting the digital LCD display, power button, mode selection, and pressure adjustment buttons. The air hose connection port is visible at the top.

• Digital LCD Display: Shows current pressure, target pressure, battery level, and selected mode.
• Power/Start/Stop Button: Turns the device on/off and starts/stops inflation.
• Mode Button: Cycles through preset inflation modes (Car, Motorcycle, Bike, Ball, Custom).
• Pressure Adjustment Buttons (+/-): Increases or decreases the target pressure.
• LED Light Button: Activates the built-in LED light.
• Air Hose Connection Port: Where the inflation hose connects.
• USB Charging Port: For recharging the internal battery.

3. Setup

3.1 Charging the Device

1. Connect the provided USB charging cable to the inflator's USB charging port.
2. Connect the other end of the USB cable to a compatible USB power adapter (not included) or a USB port on a computer.
3. The battery indicator on the LCD display will show charging status. Charge the device fully before first use.
4. A full charge typically takes approximately 3-4 hours.

3.2 Attaching the Air Hose and Adapters

1. Screw the air hose securely into the air hose connection port on the top of the inflator.
2. For car, motorcycle, and most bike tires (Schrader valve), directly attach the free end of the air hose to the valve stem.
3. For sports balls, screw the needle valve adapter onto the air hose, then insert the needle into the ball's inflation port.
4. For Presta valve bicycle tires, screw the Presta valve adapter onto the air hose, then attach it to the Presta valve.

4. Operating Instructions

4.1 Powering On/Off

• To Power On: Press and hold the Power button (ⓘ) for 2-3 seconds. The LCD display will illuminate.
• To Power Off: Press and hold the Power button (ⓘ) for 2-3 seconds. The display will turn off. The device will also automatically power off after a period of inactivity.

4.2 Selecting Inflation Mode and Pressure Unit

1. After powering on, press the Mode button (⚙) to cycle through the preset inflation modes: Car, Motorcycle, Bike, Ball, and Custom.
2. Each mode has a default target pressure. You can adjust this default or set a custom pressure.
3. To change the pressure unit (PSI, KPA, BAR, KG/CM²), press and hold the Mode button (⚙) for 2-3 seconds. The unit will cycle. Release the button when your desired unit is displayed.

4.3 Setting Target Pressure

1. Once a mode is selected, the target pressure will flash on the display.
2. Use the '+' and '-' buttons to increase or decrease the target pressure. Press and hold for faster adjustment.
3. The current pressure of the connected item will be displayed above the target pressure.

4.4 Starting and Stopping Inflation

1. Ensure the air hose is securely connected to the item to be inflated.
2. Press the Power button (ⓘ) to start inflation. The compressor will begin to operate.
3. The inflator will automatically stop once the preset target pressure is reached.
4. To manually stop inflation at any time, press the Power button (ⓘ) again.
5. After inflation, quickly disconnect the air hose from the valve stem to minimize air loss.

Image: The BRAWHOOH E CQ006 portable tire inflator shown in a versatile usage scenario, demonstrating its capability to inflate tires for cars, motorcycles, and bicycles, as well as sports balls and other inflatables.

4.5 Using the LED Light

• Press the LED Light button (often represented by a light bulb icon) to turn the light on.
• Press it again to turn the light off.
• The LED light is useful for operating the inflator in low-light conditions.

5. Maintenance

5.1 Cleaning

• Ensure the device is powered off and disconnected from any power source before cleaning.
• Wipe the exterior of the inflator with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Do not immerse the device in water or any other liquid.

5.2 Storage

• Store the inflator and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures.
• Keep the device out of reach of children.

5.3 Battery Care

• To prolong battery life, charge the device fully at least once every three months, even if not in regular use.
• Avoid completely draining the battery frequently.

6. Troubleshooting

7. Specifications

8. Warranty and Support

This product comes with a standard manufacturer's warranty. Please refer to the product packaging or contact your retailer for specific warranty terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.

Contact information (e.g., email, phone number, website) is typically provided on the product packaging or manufacturer's official website.