Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Hodozzy Carplay Autoradio. Please read this manual thoroughly before using the product to ensure proper functionality and safety. This unit is designed for Peugeot 208 and 2008 models manufactured between 2012 and 2018.
Safety Information
- Always ensure the vehicle is parked safely before operating the unit's advanced features.
- Do not attempt to disassemble or modify the unit. This may cause damage and void the warranty.
- Consult a professional for installation if you are unsure about any steps.
- Keep the unit away from water and excessive heat.
Package Contents
Verify that all items listed below are included in your package:
- Android Player Unit
- Power Cable
- RCA Cable
- Rear Camera Input Cable
- Radio Antenna
- Canbus Decoder
- GPS Antenna
- USB Cable
- User Manual
- Rear View Camera
- Microphone
Figure 1: Included components in the Hodozzy Carplay Autoradio package.
Setup and Installation
This section outlines the general steps for installing your Hodozzy Carplay Autoradio. Professional installation is recommended.
- Preparation: Ensure the vehicle's ignition is off and the battery is disconnected before starting installation.
- Remove Original Unit: Carefully remove the existing car stereo and trim panels from your Peugeot 208/2008. Refer to your vehicle's service manual for specific instructions.
- Connect Wiring Harness: Connect the provided power cable, RCA cable, and other necessary cables to the corresponding ports on the new Android player unit and your vehicle's wiring harness. The Canbus decoder should be integrated as per the wiring diagram.
- GPS Antenna Installation: Mount the GPS antenna in a location with a clear view of the sky, typically on the dashboard or under the windshield, ensuring it is securely attached.
- Radio Antenna Connection: Connect the radio antenna to the unit.
- Rear Camera Installation (Optional): If installing the rear view camera, route the rear camera input cable from the unit to the rear of the vehicle. Mount the camera near the license plate and connect its power to the vehicle's reverse light circuit.
- Test Connections: Before fully reassembling, reconnect the vehicle battery and turn on the ignition to test the unit's basic functions (power, audio, touch screen, radio).
- Secure Unit and Reassemble: Once tested, securely mount the Hodozzy Autoradio into the dashboard opening and reattach all trim panels.
Figure 2: Visual comparison of the dashboard before and after installing the Hodozzy Autoradio.
Figure 3: Wiring diagram for the Hodozzy Carplay Autoradio.
Figure 4: Reversing camera wiring instructions.
Operating Instructions
Basic Operation
- Power On/Off: The unit powers on automatically with the vehicle's ignition. Press and hold the power button (if available) to manually turn off or on.
- Touch Screen: The 10-inch In-Cell capacitive touchscreen provides responsive control. Navigate through menus and applications by tapping, swiping, and pinching.
- Volume Control: Adjust volume using the on-screen controls or the vehicle's steering wheel controls.
- Home Screen: The main interface displays essential information and shortcuts to frequently used applications. Long press on app icons to customize the home page.
Figure 5: Hodozzy Autoradio In-Cell Touch Screen features.
Figure 6: Customizing the home screen by long-pressing app icons.
Wireless CarPlay and Android Auto
Connect your smartphone wirelessly to access navigation, music, calls, and messages directly on the car stereo display.
- Ensure Bluetooth and Wi-Fi are enabled on your smartphone.
- On the autoradio, navigate to the CarPlay or Android Auto application.
- Follow the on-screen prompts to pair your phone via Bluetooth.
- Once paired, the system will automatically establish a Wi-Fi connection for CarPlay/Android Auto functionality.
Figure 7: Wireless CarPlay and Android Auto interfaces.
Bluetooth 5.0 and FM/RDS Radio
- Bluetooth: Pair your phone via Bluetooth 5.0 for hands-free calling and audio streaming. Access your phone contacts and music library directly from the unit.
- FM/RDS Radio: Tune into FM radio stations (87.5 MHz-107.5 MHz). The RDS (Radio Data System) feature displays station information, song titles, and traffic announcements where available.
Figure 8: Bluetooth 5.0 and FM/RDS Radio functions.
GPS Navigation and Wi-Fi
- GPS: The built-in GPS receiver allows for offline navigation. Download maps using the "Here We Go" app or other compatible navigation applications.
- Wi-Fi: Connect to a Wi-Fi hotspot to access online features, download apps, and stream content.
Split Screen and Mirror Link
- Split Screen: Run two applications simultaneously, such as navigation and music, for enhanced multitasking.
- Mirror Link: Mirror your smartphone screen (iOS up to 17, Android up to 14) onto the autoradio display via USB cable or Wi-Fi for a larger view of your phone's content.
Steering Wheel Control and Rear Camera
- Steering Wheel Control (SWC): Integrate with your vehicle's existing steering wheel controls for safe and convenient operation of the autoradio.
- Rear Camera: The included 12-LED AHD rear view camera automatically displays the rear view when reversing, enhancing parking safety.
Figure 9: Steering Wheel Control setup and Rear Camera view.
Digital Sound Processor (DSP) and Equalizer
- The built-in DSP and 32-band equalizer allow for precise audio customization. Adjust bass, treble, and mid-range frequencies to achieve your preferred sound profile.
Figure 10: Digital Sound Processor (DSP) and 32-band Equalizer interface.
Maintenance
- Screen Cleaning: Use a soft, lint-free cloth to gently wipe the touchscreen. Do not use abrasive cleaners or solvents.
- Software Updates: Periodically check for software updates to ensure optimal performance and access to new features. Updates can typically be downloaded via Wi-Fi.
- General Care: Avoid exposing the unit to extreme temperatures or direct sunlight for prolonged periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Loose power connection, blown fuse, vehicle battery issue. | Check power cable connections. Inspect vehicle fuses. Ensure vehicle battery is charged. |
| No sound. | Volume too low, mute activated, incorrect audio source, speaker wiring issue. | Increase volume. Check if mute is active. Select correct audio source. Verify speaker connections. |
| Touchscreen unresponsive. | Temporary software glitch, screen protector interference. | Restart the unit. Remove and reapply screen protector if applicable. |
| GPS signal weak or lost. | Antenna obstruction, poor antenna placement, software issue. | Ensure GPS antenna has a clear view of the sky. Check antenna connection. Restart navigation app. |
| CarPlay/Android Auto not connecting. | Bluetooth/Wi-Fi off, phone not paired, software incompatibility. | Ensure Bluetooth and Wi-Fi are on. Re-pair phone. Check phone OS version compatibility. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Hodozzy |
| Model Compatibility | Peugeot 208/2008 (2012-2018) |
| Screen Size | 10 inches |
| Screen Type | In-Cell Capacitive Touchscreen |
| RAM | 4 GB |
| ROM | 64 GB |
| Connectivity Technology | Wireless (Bluetooth 5.0, Wi-Fi) |
| Special Features | RDS, Touchscreen, Wireless CarPlay, Android Auto, GPS, Split Screen, Mirror Link, Steering Wheel Control, DSP, Rear Camera Support |
| Output Wattage | 180 Watts |
| Item Weight | 1 Kilogram |
| Country of Origin | China |
Warranty and Support
This Hodozzy Carplay Autoradio comes with a 2-year product warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For technical support, warranty claims, or any questions regarding your product, please contact Hodozzy customer service through the retailer where you purchased the unit or visit the official Hodozzy store on Amazon: Hodozzy Amazon Store.
Please have your model number (B0GX1BH2WC) and proof of purchase ready when contacting support.