PUSOKEI PCIe X1 Graphics Card User Manual

1. Introduction

The PUSOKEI PCIe X1 Graphics Card is a 2D GPU designed for various applications, including industrial automation, POS systems, and medical equipment. It features an HDMI single port, supporting a high resolution of 1920x1440. Engineered for reliability, this card operates effectively across a wide temperature range from -40°C to +85°C.

Key features include:

• High compatibility with multiple displays and panels.
• Quick screen image rotation (90°, 180°, 270°).
• Powerful 2D graphics acceleration for demanding applications.
• Support for video display layers.
• Robust design for harsh environments.

An overhead view of the PUSOKEI PCIe X1 Graphics Card, showing the green PCB, the PCIe x1 connector, the HDMI port, and the passive heatsink.

2. Package Contents

Upon opening the package, verify that all components are present:

• 1 x PUSOKEI PCIe X1 Graphics Card
• 1 x CD Disc (for drivers)
• 1 x Low Profile Bracket

3. Setup

1. Prepare Your System: Power off your computer and disconnect all cables. Open the computer case.
2. Install the Graphics Card: Locate an available PCIe x1 slot on your motherboard. Carefully insert the graphics card into the slot until it is firmly seated. Secure the card with a screw or retention clip.

   Note: If your computer case requires a low-profile card, replace the standard bracket on the graphics card with the included low profile bracket before installation.

   

   The reverse side of the PUSOKEI PCIe X1 Graphics Card, displaying the green PCB with circuit traces and regulatory markings. This view helps identify the card for proper installation.

3. Connect Display: Connect your display monitor to the HDMI port on the graphics card.
   

   A close-up view of the HDMI output port located on the metal bracket of the PUSOKEI PCIe X1 Graphics Card, ready for display connection.

4. Power On and Install Drivers: Close your computer case, reconnect all cables, and power on your system. Insert the provided CD Disc into your optical drive and follow the on-screen instructions to install the necessary drivers. Alternatively, visit the PUSOKEI support website for the latest drivers.

4. Operating

Once the drivers are installed, the graphics card will be ready for use. The card supports a maximum resolution of 1920x1440.

Screen Rotation: This graphics card supports quick screen image rotation at 90°, 180°, and 270°. This feature can typically be accessed and configured through your operating system's display settings or the graphics driver control panel.

Supported Operating Systems: The card is compatible with CE, XP, 7, 2003 (32-bit/64-bit), 2008 (32-bit/64-bit), Linux Enterprise (32-bit/64-bit), Ubuntu, and Centos.

5. Maintenance

To ensure optimal performance and longevity of your graphics card, follow these maintenance guidelines:

• Cleaning: Periodically clean dust from the heatsink and components using compressed air. Ensure the computer is powered off and unplugged before cleaning.
• Ventilation: Ensure adequate airflow within your computer case to prevent overheating. The card is designed to operate within a wide temperature range of -40°C to +85°C, but good ventilation is always recommended.

6. Troubleshooting

If you encounter issues with your PUSOKEI PCIe X1 Graphics Card, consider the following troubleshooting steps:

• No Display Output:
  • Verify that the graphics card is securely seated in the PCIe slot.
  • Ensure the HDMI cable is properly connected to both the graphics card and the monitor.
  • Check if your monitor is set to the correct input source (HDMI).
  • Test with a different HDMI cable or monitor if possible.
• Driver Issues:
  • Ensure the correct drivers are installed. Reinstall drivers from the provided CD or the official PUSOKEI website.
  • Check for driver conflicts in your operating system's Device Manager.
• System Instability:
  • Ensure your system's power supply unit (PSU) meets the minimum requirements for all installed components.
  • Check for overheating. Ensure proper ventilation.

7. Specifications

8. Warranty Information

For warranty details, please refer to the documentation included with your purchase or contact PUSOKEI customer support. Standard warranty terms typically cover manufacturing defects for a specified period from the date of purchase.

9. Support Information

For technical assistance or further inquiries, please visit the official PUSOKEI website or contact their customer support channels. Keep your product model number (PUSOKEIswj3qkexbr) and purchase details ready when seeking support.