Introduction
Thank you for choosing the Jojoka Oversized Papasan Rocking Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read it thoroughly before use and retain it for future reference.
This rocking chair features an integrated comfort footrest, an ergonomic egg-shaped design, and a thick, removable cushion for enhanced relaxation. It is constructed with a rustproof metal frame and handwoven PE rattan, suitable for both indoor and outdoor environments.
Safety Information
WARNING:
- This product requires assembly. Always follow the included instructions for safe and proper assembly.
- Do not exceed the maximum weight recommendation of 352 pounds (160 kg).
- This chair is suitable for both indoor and outdoor use. For outdoor use, store the chair in a covered area or bring it indoors during inclement weather to prolong its lifespan.
- Always inspect the chair for any damage or wear before use. Discontinue use if any damage is found.
- Keep children and pets away from the chair during assembly to prevent injury.
- Ensure all bolts and screws are securely tightened before using the chair.
Package Contents
Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- Chair Frame Components (metal frame, PE rattan base)
- Detachable Foot Rest
- Thick Removable Cushion
- Hardware Pack (screws, bolts, washers, Allen wrench)
- Assembly Instructions Manual (this document)
Figure 1: Illustration of the chair's components, including the reinforced steel frame, high-quality PP cotton filling, UV-resistant fabric, soft flannel fabric, and superior powder-coated frame.
Setup and Assembly Instructions
Assembly is designed to be straightforward. It is recommended to assemble the chair on a soft, clean surface to prevent scratching. All necessary hardware and tools are included.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a protected surface. Verify all parts listed in the "Package Contents" section are present.
- Assemble the Base Frame: Connect the main metal frame pieces using the provided bolts and Allen wrench. Ensure all connections are finger-tightened initially.
- Attach the Rocking Mechanism: Secure the rocking base to the assembled frame. Double-check that the rocking rails are properly aligned and securely fastened.
- Install the PE Rattan Seat Base: Place the handwoven PE rattan seat base onto the frame, aligning any pre-drilled holes or attachment points. Secure it according to the specific instructions provided in the physical manual.
- Attach the Foot Rest: Connect the detachable footrest to the main frame. Ensure it is securely attached and can be adjusted or removed as intended.
- Tighten All Fasteners: Once all components are in place, systematically tighten all bolts and screws using the Allen wrench. Do not overtighten.
- Place the Cushion: Position the thick removable cushion onto the chair frame. The cushion may have straps or ties to secure it to the frame, preventing sliding.
Figure 2: Details highlighting the cushion's securing straps and the handwoven PE rattan construction, emphasizing ease of installation.
Operating Instructions
Your Jojoka Papasan Rocking Chair is designed for comfortable relaxation. Follow these guidelines for optimal use:
- Sitting Position: Sit centrally on the cushion, allowing the ergonomic egg-shaped design to cradle your back, waist, and hips for maximum comfort.
- Rocking Motion: Gently push off with your feet to initiate a smooth rocking motion. The stable rocking base ensures a safe and comfortable sway.
- Using the Foot Rest: The integrated footrest is designed to support your legs and relieve pressure. Extend your legs onto the footrest for full relaxation. It can be detached if not desired.
- Indoor/Outdoor Use: This chair is versatile for both indoor and outdoor settings. When used outdoors, consider placing it in a covered area to protect it from prolonged exposure to harsh weather.
Figure 3: Demonstrates a user enjoying the chair indoors, utilizing the integrated footrest for full relaxation.
Figure 4: Shows the chair in an outdoor setting, highlighting its suitability for garden or patio use.
Maintenance
Proper maintenance will extend the life and appearance of your rocking chair.
- Cushion Care: The cushion's premium outer fabric is waterproof, stain-resistant, and UV-protected. For cleaning, the detachable design allows for easy removal. Spot clean with a mild soap and water solution, then air dry. Do not machine wash or tumble dry unless specified on the cushion's care label.
- Frame Care: Wipe the metal frame with a damp cloth to remove dust and dirt. Avoid abrasive cleaners. The powder-coated steel frame is rust-resistant, but prolonged exposure to moisture should be avoided.
- PE Rattan Care: Clean the handwoven PE rattan with a soft brush or damp cloth. Avoid harsh chemicals that could damage the material.
- Seasonal Storage: If using outdoors, consider storing the chair indoors or covering it with a protective cover during off-seasons or inclement weather to prevent wear and tear.
- Fastener Check: Periodically check all bolts and screws to ensure they remain tight. Retighten if necessary.
Figure 5: Illustrates the features of the comfortable cushion, including its material composition and resistance properties.
Troubleshooting
If you encounter any issues with your rocking chair, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair feels wobbly or unstable. | Loose fasteners or uneven assembly. | Check and tighten all bolts and screws. Ensure the chair is on a flat, level surface. |
| Cushion slides off the chair. | Cushion not properly secured. | Utilize the cushion's straps or ties to secure it to the chair frame. |
| Squeaking noise during rocking. | Friction between metal parts or loose connections. | Apply a small amount of silicone lubricant to moving parts or joints. Check and tighten all fasteners. |
| Rattan appears damaged or frayed. | Wear and tear or environmental exposure. | For minor fraying, trim carefully. For significant damage, contact customer support for repair options or replacement parts. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Jojoka |
| Model Number | PPG_33NMO11TCJNBVTB |
| Color | Dark Grey-flannel |
| Material | Velvet (Upholstery), Polyester (Seat/Fill), Polypropylene (Frame Material Type) |
| Product Dimensions (D x W x H) | 41.73"D x 31.5"W x 29.53"H (106cm D x 80cm W x 75cm H) |
| Item Weight | 46.3 Pounds (21 kg) |
| Maximum Weight Recommendation | 352 Pounds (160 kg) |
| Indoor/Outdoor Usage | Indoor, Outdoor |
| Included Components | Cushion, Detachable Foot Rest |
| Assembly Required | Yes |
Figure 6: Visual representation of the chair's dimensions and weight capacity (352 lbs).
Warranty and Support
Jojoka is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase. For any questions, concerns, or to report missing/damaged parts, please contact Jojoka customer support through the retailer where the product was purchased or visit the official Jojoka website for contact information.
We value your satisfaction and are here to assist you.