Racokky M200 Rechargeable Motion Sensor Under Cabinet Lights - User Manual

1. Introduction

Thank you for choosing the Racokky M200 Rechargeable Motion Sensor Under Cabinet Lights. This product provides convenient, versatile, and energy-efficient lighting for various indoor spaces. Featuring motion detection, dimmable settings, and a unique charging station, these lights are designed to enhance visibility and comfort in areas such as kitchens, wardrobes, closets, stairs, and RV interiors.

2. Package Contents

Please check the package to ensure all items are present:

• Racokky M200 LED Lights (6 units)
• Charging Station (1 unit)
• Remote Control (1 unit)
• USB Charging Cable (1 unit)
• Adhesive Pads (for mounting)
• Metal Strips (for magnetic mounting)
• User Manual (this document)

3. Product Features

• All-in-One Charging Station: Powers up to 3 lights simultaneously with a single USB cable. Each light features a built-in 1000mAh battery, providing 10-20 days of use in motion sensor mode on a full charge.
• Smart Dual-Sensor Modes: Offers Night Mode (activates only in darkness) and Day Mode (activates anytime). Detects motion within 10ft/120° and automatically shuts off after 15 seconds of no activity.
• Fully Dimmable & Timer-Ready: Adjust brightness with 3 preset levels (10%/50%/100%) or use stepless dimming. Set auto-off timers for 10, 30, 60, or 120 minutes via remote control.
• Effortless 2-in-1 Installation: Can be attached directly to iron surfaces with built-in magnets or mounted using adhesive tape and metal strips on non-iron surfaces.
• Versatile Application: Suitable for various indoor locations including cabinets, closets, hallways, bathrooms, drawers, attics, basements, storage rooms, garages, cellars, vanity mirrors, and stairs. Also suitable for covered areas in RVs and campers.

4. Setup and Installation

The Racokky M200 lights offer two installation methods:

1. Magnetic Attachment: If the desired surface is made of iron, the light can be directly attached using its built-in magnets.
2. Adhesive Mounting: For non-iron surfaces (wood, tile, glass), use the provided adhesive pads and metal strips.
   • Clean the surface thoroughly with rubbing alcohol and allow it to dry completely for optimal adhesion.
   • Peel the protective film from one side of an adhesive pad and attach it to a metal strip.
   • Peel the protective film from the other side of the adhesive pad and firmly press the metal strip onto the desired clean surface.
   • Align the magnets on the back of the light with the metal strip and attach the light.

Image: Illustration of the two installation methods: direct magnetic attachment and adhesive mounting with a metal strip.

5. Charging Instructions

The Racokky M200 lights are rechargeable using the included charging station.

1. Place up to three lights into the charging slots on the charging station.
2. Connect the USB charging cable to the charging station and to a compatible USB power source (e.g., computer, USB wall adapter, power bank).
3. Charging Indicator:
   • A red light indicates that the unit is currently charging.
   • A green light indicates that the unit is fully charged.
4. Once fully charged, disconnect the lights from the charging station.

Image: The 3-in-1 charging station connected to a laptop via USB, showing red (charging) and green (fully charged) indicator lights.

6. Operating Instructions

6.1. Cycle Mode Switch

The lights feature a 3-cycle mode switch to select the desired operating mode:

• Night Mode: The light will automatically turn on only when motion is detected in a dark environment. Ideal for bedrooms or areas where light is only needed at night.
• Day Mode: The light will automatically turn on when motion is detected, regardless of ambient light conditions (dark or daytime). Suitable for dim RVs, closets, or garages.
• Always On Mode: The light remains continuously on, providing non-stop illumination.

Image: Visual representation of the three cycle modes: Night Mode, Day Mode, and Always On Mode, with examples of their use.

6.2. Motion Sensor Function

In Night Mode or Day Mode, the integrated motion sensor detects movement within a 10-foot (3-meter) range and a 120-degree angle. The light will illuminate instantly upon detection and automatically turn off after 15 seconds of no activity to conserve battery power.

Image: A motion sensor light illuminating RV steps, highlighting the detection distance, angle, and auto-off feature.

6.3. Remote Control Functions

The included remote control allows for convenient adjustment of brightness and timer settings.

• Brightness Adjustment:
  • Use the +/- buttons for stepless dimming to achieve precise brightness levels.
  • Select from 3 preset brightness levels: 10%, 50%, or 100%.
• Timer Function: Set the light to automatically turn off after a specified duration.
  • Available timer settings: 10 minutes, 30 minutes, 60 minutes, or 120 minutes.

Image: A remote control demonstrating brightness adjustment (stepless and preset levels) and timer functions for the under cabinet lights.

7. Maintenance

• Cleaning: Wipe the lights and charging station with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery Care: For optimal battery life, avoid fully discharging the lights frequently. Recharge them when the brightness noticeably diminishes.
• Storage: If storing the lights for an extended period, ensure they are fully charged and store them in a cool, dry place. Recharge every 3-6 months to maintain battery health.

8. Troubleshooting

9. Specifications

Image: Product dimensions (8'' x 1.57'' x 0.63'') and USB charging port location.

10. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Racokky customer service through your purchase platform. Please have your model number (M200) and purchase details ready when contacting support.