BRAWHOOH E CQ006 Portable Tire Inflator Instruction Manual

Introduction

Thank you for purchasing the BRAWHOOH E CQ006 Portable Tire Inflator. This device is designed for convenient and efficient inflation of various items such as car tires, motorcycle tires, bicycle tires, and sports balls. It features a digital pressure gauge, automatic shut-off, and multiple inflation modes. Please read this manual thoroughly before use to ensure proper operation and safety.

Safety Instructions

• Do not leave the inflator unattended during operation.
• Keep out of reach of children.
• Do not use the inflator in wet conditions or near flammable liquids/gases.
• Ensure the inflation tube is securely connected before starting inflation.
• Avoid over-inflating. Always refer to the recommended pressure for your item.
• The inflation tube can become hot during prolonged use. Handle with care.
• For optimal battery performance, fully charge the pump before every use. Cold weather can reduce battery efficiency.

Package Contents

Verify that all items are present:

• BRAWHOOH E CQ006 Portable Tire Inflator
• USB Cable (for charging)
• Various Nozzle Adapters (for different inflation needs)
• Storage Bag
• User Manual (this document)

Product Overview

The BRAWHOOH E CQ006 features a compact design with a digital display and integrated LED light. It is equipped with a 10000 mAh battery for extended use.

Figure 1: BRAWHOOH E CQ006 Portable Tire Inflator showing its 10000 mAh battery capacity and estimated inflation counts for various items: Car Tires (x12, 30-36PSI), Motorcycles (x20, 28-33PSI), Bikes (x15, 0-120PSI), and Balls (x80, 0-8PSI).

Figure 2: The built-in LED light feature of the inflator, illustrating its three modes: Normal, Emergency, and Strobe. This light assists in low-light conditions.

Figure 3: Digital display of the inflator demonstrating the auto shut-off function. It shows real-time pressure, a preset value (e.g., 36.0 PSI), and icons for the 5 inflation modes (Car, Motorcycle, Bike, Ball, Custom).

Setup

Charging the Device

1. Connect the provided USB cable to the Type-C input port on the inflator.
2. Connect the other end of the USB cable to a compatible USB power adapter (not included) or a power source.
3. The display will indicate charging status. Ensure the device is fully charged before first use for optimal battery life.

Attaching the Air Tube and Nozzle

1. Screw the heat-resisting air tube securely onto the inflator's air outlet.
2. Select the appropriate nozzle adapter for the item you wish to inflate (e.g., Presta valve adapter for bikes, needle for balls).
3. Attach the selected nozzle adapter to the end of the air tube.

Operating Instructions

Powering On/Off

• Press and hold the power button to turn the inflator on or off.

Selecting Inflation Mode and Pressure Unit

1. With the device on, press the 'M' button to cycle through the 5 preset inflation modes: Car, Motorcycle, Bike, Ball, and Custom Mode.
2. Each mode has a default pressure setting.
3. To change the pressure unit (PSI, KPA, BAR, KG/CM²), press the unit button (often labeled 'UNIT' or similar, refer to device markings).

Setting Desired Pressure

1. After selecting an inflation mode, use the '+' and '-' buttons to adjust the target pressure value.
2. The digital display will show the real-time pressure and the preset target pressure.

Starting and Stopping Inflation

1. Connect the nozzle securely to the item's valve.
2. Press the 'Start/Stop' button (often indicated by a play/pause icon) to begin inflation.
3. The inflator will automatically stop once the preset pressure is reached.
4. To manually stop inflation, press the 'Start/Stop' button again.
5. Carefully disconnect the nozzle from the valve.

Using the LED Light

• Press the LED light button (often indicated by a light bulb icon) to turn on the light.
• Press the button again to cycle through different light modes (Normal, Emergency, Strobe).
• Press and hold the button to turn off the LED light.

Using as a Power Bank

• The inflator features a 5V/2A USB output port.
• Connect your mobile device or other USB-powered device to this port using a compatible USB cable to use the inflator as an emergency power supply.

Maintenance

• Cleaning: Wipe the exterior of the inflator with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the inflator and its accessories in the provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, charge the device regularly, even if not in frequent use. Avoid completely draining the battery.
• Air Tube: Inspect the air tube for any signs of wear or damage before each use. Replace if necessary.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official BRAWHOOH E website. Keep your purchase receipt as proof of purchase.

Return Policy: This product typically comes with a 30-day return policy for refund or replacement. Please check with your retailer for specific terms.