Introduction
Thank you for choosing the TYBERLEY Pagani Design PD1796 Automatic Watch. This manual provides essential information for the proper setup, operation, maintenance, and care of your new timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.
Image: Front view of the Pagani Design PD1796 Automatic Watch with a blue dial and leather strap.
Setup
1. Initial Winding
Your Pagani Design PD1796 watch is equipped with an automatic mechanical movement. Before first use, or if the watch has stopped due to inactivity, it requires manual winding to initiate power reserve.
- Locate the crown on the right side of the watch case.
- Ensure the crown is in the fully pushed-in position (position 0).
- Rotate the crown clockwise approximately 30 times. This will build up sufficient power reserve to start the watch.
- The watch will begin to operate.
Image: Side view of the watch, highlighting the crown used for winding and setting.
2. Setting the Time
- Gently pull the crown out to position 1 (first click).
- Rotate the crown to adjust the hour and minute hands to the correct time.
- Once the time is set, push the crown back into position 0.
Operating Your Watch
Automatic Movement
The PD1796 features a self-winding mechanical movement. This means the watch is powered by the natural motion of your wrist while worn. If worn for less than eight hours daily, or if the watch has been inactive for an extended period, it may require manual winding (as described in the "Initial Winding" section) to maintain its power reserve.
Image: The Pagani Design PD1796 watch being worn on a wrist, demonstrating its intended use.
Tourbillon Feature
The watch features a visible tourbillon subdial at the 6 o'clock position, showcasing the intricate mechanical structure and movement. This is a functional and aesthetic element of the watch's design.
Video: A close-up demonstration of the Pagani Design PD1796 automatic watch, highlighting the intricate tourbillon movement and the overall design.
Luminescent Hands
The hands of the watch are luminescent, allowing for clear time-reading in low-light conditions. Exposure to light will charge the luminescence.
Image: The watch dial showing the luminescent hands glowing in a dark environment.
Maintenance and Care
Water Resistance
This watch has a water resistance rating of 100 meters (10 ATM), making it suitable for daily life activities such as hand washing, rain exposure, and swimming. It is not suitable for diving or high-pressure water activities.
Important: Always ensure the crown is fully screwed down (if applicable) or pushed in before the watch comes into contact with water to prevent water ingress.
Image: Rear view of the watch, displaying the stainless steel case back and the folding clasp of the leather strap.
Cleaning
To maintain the appearance of your watch:
- Wipe the case and sapphire crystal with a soft, dry cloth.
- For the leather strap, avoid prolonged exposure to water, direct sunlight, and harsh chemicals to prevent damage and discoloration.
- Do not use chemical cleaners or abrasive materials on any part of the watch.
Storage
When not wearing your watch for an extended period, store it in a cool, dry place away from direct sunlight and strong magnetic fields. A watch winder can be used to keep the automatic movement running and maintain accuracy.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch has stopped or runs intermittently. | Insufficient power reserve. | Manually wind the watch by rotating the crown clockwise approximately 30 times. Wear the watch regularly for at least 8 hours a day. |
| Time is inaccurate. | Low power reserve or exposure to strong magnetic fields. | Ensure the watch is fully wound. Keep the watch away from strong magnetic sources (e.g., speakers, refrigerators, certain electronic devices). If inaccuracy persists, professional service may be required. |
| Water inside the watch. | Crown not fully pushed in or screwed down when exposed to water. | Immediately take the watch to a qualified watch repair professional. Do not attempt to open the watch yourself. |
Specifications
| Model Name: | PD1796-TYBY |
| Movement Type: | Automatic Mechanical |
| Case Material: | Stainless Steel |
| Crystal: | Synthetic Sapphire |
| Case Diameter: | 42 millimeters |
| Case Thickness: | 14 millimeters |
| Band Material: | Leather |
| Band Width: | 22 millimeters |
| Band Length: | 22 centimeters |
| Clasp Type: | Folding Clasp |
| Water Resistance Depth: | 100 meters (10 ATM) |
| Additional Features: | Tourbillon, Luminescent Hands |
Warranty Information
This TYBERLEY Pagani Design PD1796 watch comes with a Limited Warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration of coverage. The warranty typically covers manufacturing defects but does not cover damage resulting from improper use, accidents, or unauthorized repairs.
Customer Support
For further assistance, technical support, or inquiries regarding your TYBERLEY Pagani Design PD1796 watch, please contact the seller or refer to the contact information provided in your product documentation. Ensure you have your model number (PD1796) and purchase details ready when contacting support.