1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your WinZo Smart Toilet with Bidet Built-in, Model SM8013-1H. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
Figure 1.1: WinZo Smart Toilet, Model SM8013-1H
2. Safety Information
Observe all safety warnings and precautions to prevent injury or damage. This appliance is for household use only. Do not attempt to repair or modify the unit yourself. Contact qualified service personnel for assistance.
Important Safety Precautions:
- Ensure the power supply is 110V and properly grounded.
- Do not immerse the unit in water or spray water directly onto electrical components.
- Keep children and individuals with reduced physical, sensory, or mental capabilities away from the unit unless supervised.
- Disconnect power before cleaning or performing any maintenance.
- Do not use abrasive cleaners or harsh chemicals on the toilet surface.
- The tankless design requires a minimum water pressure of 0.15 Mpa.
Figure 2.1: Multiple Security Protection Features
3. Product Components
The WinZo Smart Toilet includes the following main components:
- Smart Toilet Unit (one-piece ceramic body)
- Integrated Bidet System
- Heated Seat
- LED Display
- Night Light
- Remote Control (All-in-One)
- Installation Hardware (e.g., mounting bolts, wax ring)
- Water Supply Hose
Figure 3.1: Product Dimensions and Installation Requirements
4. Setup & Installation
Professional installation is recommended. Ensure all local plumbing and electrical codes are met. The toilet is designed for a standard 12-inch rough-in.
Installation Steps:
- Prepare the Area: Turn off the water supply to the existing toilet and flush to empty the tank. Remove the old toilet. Clean the flange area thoroughly.
- Install Mounting Bolts: Secure the mounting bolts to the floor flange.
- Place Wax Ring: Position a new wax ring around the drain opening on the floor flange.
- Set the Toilet: Carefully lower the WinZo Smart Toilet onto the mounting bolts, ensuring the wax ring creates a seal. Press down firmly and evenly.
- Secure the Toilet: Install washers and nuts onto the mounting bolts. Tighten gradually and evenly to prevent cracking the ceramic. Do not overtighten.
- Connect Water Supply: Connect the water supply hose from the angle stop valve to the toilet's water inlet. Ensure a tight, leak-free connection. The toilet requires a minimum water pressure of 0.15 Mpa.
- Connect Power: Plug the toilet's power cord into a grounded 110V electrical outlet.
- Test Functionality: Turn on the water supply and check for leaks. Test all functions of the toilet as described in the operating instructions.
5. Operating Instructions
Your WinZo Smart Toilet offers a range of automated and customizable features for enhanced comfort and hygiene.
5.1 Auto Open/Close & Flush
- Lid Opening: The lid automatically opens as you approach the toilet.
- Seat Opening (Foot Kick): For standing use, a gentle foot kick near the sensor will open the seat.
- Auto Flush: The toilet flushes automatically after use.
- Lid Closing: The lid closes automatically after a set period (e.g., 90 seconds) or after flushing.
Figure 5.1: Auto Open/Close and Flush Operation
5.2 Bidet Functions (Washing & Drying)
The bidet features instant warm water and adjustable settings.
- Feminine Wash: Rotate the side knob counter-clockwise or select on the remote.
- Rear Wash (Hip Wash): Rotate the side knob clockwise or select on the remote.
- Oscillating Wash (Mobile Wash): Select on the remote to move the nozzle forward and back for a wider cleaning area.
- Water Pressure Adjustment: Use the remote to adjust water pressure.
- Warm Air Drying: After washing, select the drying function on the remote. Adjust from four temperature settings.
Figure 5.2: Arc-Shaped Spray Nozzle and Wash Modes
Figure 5.3: Instant Warm Water, Warm Air Dryer, and Heated Seat
5.3 Heated Seat & Night Light
- Heated Seat: The seat offers four adjustable temperature settings for comfort. Control via remote.
- Night Light: A gentle LED night light illuminates the bowl, providing visibility in the dark. This feature activates automatically in low light conditions.
Figure 5.4: Instant Heated Seat
Figure 5.5: LED Display
5.4 Controls
- Side Knob Control: A multi-functional knob on the side of the toilet allows for easy control of essential bidet functions (feminine wash, hip wash, stop).
- Remote Control: The included remote provides full control over all features, including wash modes, water pressure, water temperature, seat temperature, dryer temperature, and flush options.
Figure 5.6: Side Knob and Remote Control
6. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your smart toilet.
6.1 Cleaning the Toilet
- Exterior: Wipe the exterior surfaces with a soft, damp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads.
- Bowl: Use a standard toilet brush and toilet bowl cleaner for the interior of the bowl.
- Nozzle: The bidet nozzle features a self-cleaning function. Activate this function periodically via the remote control. For manual cleaning, gently pull out the nozzle and wipe with a soft cloth. Do not use excessive force.
Figure 6.1: Nozzle Self-Cleaning Feature
6.2 Filter Maintenance
Periodically check the water inlet filter for debris. If clogged, turn off the water supply, disconnect the hose, and clean the filter screen. Reassemble and check for leaks.
6.3 Power Outage
The toilet includes a built-in battery compartment (batteries not included) to ensure flushing capability during power outages. Install appropriate batteries as per the compartment markings.
7. Troubleshooting
Refer to the table below for common issues and their solutions. If the problem persists, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/LED display off | Power cord unplugged, circuit breaker tripped, no power to outlet. | Check power connection, reset circuit breaker, test outlet with another device. |
| No water for bidet/flush | Water supply valve closed, water pressure too low, inlet filter clogged. | Open water supply valve, ensure minimum 0.15 Mpa pressure, clean inlet filter. |
| Heated seat not working | Seat heating function off, temperature setting too low, seat sensor not detecting user. | Activate heating via remote, increase temperature setting, ensure proper seating. |
| Auto open/close not working | Sensor obstructed or dirty, auto function disabled. | Clean sensor area, ensure no obstructions, check remote settings for auto function. |
| Leakage | Loose connections, damaged wax ring, cracked ceramic. | Check all water connections and tighten. If wax ring or ceramic is damaged, professional repair or replacement may be needed. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | SM8013-1H |
| Color | Gray |
| Product Dimensions (D x W x H) | 27.75" x 17" x 20" |
| Material | Ceramic |
| Item Weight | 95 Pounds |
| Rough-in | 12-inch |
| Power Requirement | 110V |
| Minimum Water Pressure | 0.15 Mpa |
| Seat Material | Plastic |
| Installation Method | Floor Mounted |
| Included Components | Smart Toilet, Remote Control |
9. Warranty & Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official WinZo website. Keep your purchase receipt as proof of purchase for warranty claims.
If you encounter any issues not covered in the troubleshooting section, or require further assistance, please contact WinZo customer service.