BELLEZE Corner Wine Cabinet with Rotating Rack

Introduction

Thank you for choosing the BELLEZE Corner Wine Cabinet. This manual provides essential information for the safe assembly, operation, and maintenance of your new cabinet. Please read these instructions thoroughly before beginning assembly or use, and retain them for future reference.

Safety Information

• Always assemble the cabinet on a soft, clean surface to prevent scratches.
• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Do not overtighten screws during assembly, as this may damage the material.
• Keep small parts and packaging materials away from children and pets.
• For stability, place the cabinet on a level surface. Consider using anti-tip hardware (if included) to secure the cabinet to a wall, especially in homes with children or pets.
• Do not exceed the maximum weight capacity of 90 pounds for the entire unit. Distribute weight evenly.

Parts List

Before assembly, verify that all components listed below are present. If any parts are missing or damaged, please contact customer support.

• Top Cabinet Section (with glass racks and fixed shelves)
• Bottom Cabinet Section (with doors and adjustable shelf)
• Rotating Wine Rack Mechanism
• Cabinet Doors (2)
• Adjustable Shelf (1)
• Hardware Pack (screws, dowels, cam locks, hinges, handles, anti-tip kit)
• User Manual (this document)

Image: A general view of the BELLEZE Corner Wine Cabinet, representing the main components.

Setup and Assembly

Assembly typically takes approximately 2 hours. It is recommended to have two people for assembly. Please follow these steps carefully.

1. Prepare the Area: Clear a spacious, clean, and soft area for assembly to prevent damage to the cabinet parts.
2. Identify Parts: Unpack all components and hardware. Compare them with the parts list to ensure everything is present.
3. Assemble the Base: Begin by assembling the base frame of the bottom cabinet section according to the included diagrams. Secure panels using dowels and cam locks.
4. Install Adjustable Shelf: Insert shelf pins into the desired holes within the bottom cabinet section, then place the adjustable shelf on top.
5. Attach Doors to Bottom Section: Secure the hinges to the cabinet doors and then attach the doors to the bottom cabinet section. Ensure soft-close mechanisms are correctly aligned.
6. Assemble Top Cabinet Section: Construct the frame of the top cabinet section, including the fixed shelves and glass racks.
7. Install Rotating Wine Rack: Carefully integrate the rotating wine rack mechanism into the designated area of the top cabinet section. Ensure it rotates smoothly.
8. Join Top and Bottom Sections: With assistance, carefully lift the assembled top section and align it with the bottom section. Secure them together using the provided connectors.
9. Attach Handles: Install the antique gold handles to the cabinet doors.
10. Position and Secure: Move the fully assembled cabinet to its desired corner location. For enhanced safety, attach the anti-tip hardware to the back of the cabinet and secure it to a wall stud.

Image: A diagram illustrating the overall dimensions of the assembled BELLEZE Corner Wine Cabinet, showing height, width, and depth.

Operating Instructions

• Using the Rotating Wine Rack: Gently push or pull the central section of the upper cabinet to rotate the wine rack. This allows for easy access to bottles stored on either side.
• Storing Wine Bottles: Place wine bottles horizontally on the curved shelves of the rotating rack. The design accommodates standard wine bottle sizes.
• Glass Storage: Utilize the hanging racks in the upper section to store wine glasses securely.
• Soft-Close Doors: The lower cabinet doors feature a push-to-open mechanism. Gently press the door to release the latch, then pull to open. When closing, push the door until it clicks into place. The soft-close hinges ensure quiet operation.
• Adjustable Shelf: The shelf in the lower cabinet can be adjusted to different heights. To adjust, remove items from the shelf, lift the shelf, remove the shelf pins, reposition the pins to the desired height, and then replace the shelf.

Image: An interior view of the BELLEZE Corner Wine Cabinet, highlighting the adjustable shelf in the lower section and the glass racks in the upper section.

Maintenance

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, which can damage the finish.
• Spills: Clean up spills immediately to prevent staining or damage to the engineered wood.
• Hardware: Periodically check all screws and fasteners to ensure they remain tight. Retighten if necessary.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.

Troubleshooting

Specifications

Warranty and Support

For warranty information, please refer to the documentation included with your purchase or visit the official BELLEZE website. If you require assistance with assembly, missing parts, or have any questions regarding your product, please contact BELLEZE customer support.

BELLEZE Customer Support:

• Website: BELLEZE Official Store
• Contact Information: Please check the BELLEZE website for the most current contact details (phone, email, chat).