VIVOHOME VH1889 Bathroom Exhaust Fan with Humidity Sensor and 5-Color LED Light User Manual

Introduction

The VIVOHOME VH1889 Bathroom Exhaust Fan is designed to provide efficient ventilation and lighting for bathrooms up to 280 sq ft. This advanced unit features a humidity sensor for automatic operation, a powerful 240 CFM airflow, 6 fan speeds, and an integrated LED light with 5 color temperatures and 6 brightness levels, including a nightlight mode. All functions are conveniently controlled via a digital remote.

This manual provides detailed instructions for the safe installation, proper operation, routine maintenance, and effective troubleshooting of your VIVOHOME VH1889 Bathroom Exhaust Fan. Please read all instructions carefully before installation and use.

Safety Information

• Always disconnect power at the circuit breaker before installing or servicing the fan.
• Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.
• Ensure the fan is properly grounded.
• Do not use this fan in a cooking area.
• Do not use this fan with a solid-state speed control device unless specifically designed for this fan.
• Wear safety glasses and gloves during installation.

Package Contents

Verify that all components are present before beginning installation:

• 1 x VIVOHOME Bathroom Exhaust Fan (Metal Housing, 6-Speed)
• 1 x Remote Control Panel (with Mounting Plate)
• 1 x Expandable Mounting Bracket (Adjustable Installation Frame)
• 1 x Cut-Out Template (Opening Guide)
• 1 x Exterior Vent Hood (Wall/Window Outlet Cover)
• 1 x Plug-in Test Power Cable
• 1 Set x Installation Screws
• 1 Set x Remote Panel Mounting Screws
• 1 x User Manual

Image: Complete accessory kit including fan, remote, mounting bracket, and hardware.

Setup and Installation

Pre-Installation Check

Before permanent installation, connect the fan to power using the included test cord cap to verify that it functions correctly. This allows you to test the fan and light features.

Remote Control Pairing

The remote control requires two AAA batteries (not included). To pair the remote with the fan, refer to the specific pairing instructions located on the back of the remote control unit.

Installation Steps

1. Prepare Ceiling Opening: Use the provided cut-out template to mark and cut an 11.37 x 12.12 inch opening in the ceiling.
2. Connect Ducting: The fan is designed for 6-inch diameter ducts. Connect the fan's exhaust port to a 6-inch duct (aluminum foil duct included). Ensure a secure and airtight connection.
3. Mounting Options:
   • Direct Joist Mount: If installing directly to a ceiling joist, secure the fan housing using appropriate expansion screws.
   • Adjustable Bracket Mount (Flex Bracket): For installations between joists, use the expandable mounting bracket. This bracket adjusts to fit joist spacing between 12-22 inches. Secure the bracket to the joists, then attach the fan housing to the bracket.
4. Electrical Wiring: Connect the electrical wiring according to the wiring diagram in the full user manual and local electrical codes. Ensure all connections are secure and properly insulated.
5. Attach Decorative Panel: Once the fan housing and wiring are complete, attach the decorative grille and light cover to the ceiling.

Image: Illustration of two installation methods: Mount Between Ceiling Joists and Mount On Single Joist Side.

Image: Step-by-step guide for installing the fan using the flex bracket.

Important Note: The included mounting screws may not be suitable for dense lumber. Consider using high-quality construction screws for a more secure installation. If installing in an attic, using insulated 6-inch ducting is recommended to prevent condensation.

Operating Instructions

Remote Control Overview

The digital display remote control allows full management of the fan and light functions. It shows the current fan speed level and light status.

Image: Digital display remote control showing fan and light settings.

Fan Control

• Power On/Off: Press the power button (U) to turn the unit on or off.
• Automatic Humidity Sensing: The fan features smart humidity control. It automatically adjusts its speed based on real-time humidity levels:
  • Off: When relative humidity (RH) is ≤ 50%.
  • Normal (160 CFM): When RH is between 50% and 80%.
  • Boost (240 CFM): When RH is ≥ 80%.
  To activate this mode, press the AUTO button on the remote.
• Manual Speed Control: Use the Fan Speed + and Fan Speed - buttons to manually select one of the 6 available fan speeds.

Image: Diagram illustrating automatic fan speed adjustment based on humidity levels.

Light Control

• Light Switch: Press the light switch button to turn the light on or off.
• Color Temperature (CCT) Adjustment: Use the CCT buttons (K) to cycle through 5 precise color temperatures: 2700K (Warm White), 3200K (Soft White), 4000K (Neutral White), 5000K (Cool White), and 5700K (Daylight).
• Brightness Adjustment: Use the brightness adjustment buttons to select from 6 brightness levels (10% to 100%).
• Nightlight Mode: Press the nightlight button to activate a soft nightlight mode (2700K, 10% brightness) for gentle illumination.
• Memory Function: The fan remembers your last light and fan settings when powered off and restores them upon restart.

Image: Visual representation of 5 color temperatures and 6 brightness levels.

Timer Function

Press the timer buttons to set the fan to run for a specified duration: 0.5 hours (30 minutes), 1 hour, or 1.5 hours. The fan will automatically turn off after the set time.

Mute Button

Press the mute button to silence the remote control's audible feedback.

Maintenance

Regular maintenance ensures optimal performance and longevity of your exhaust fan.

• Cleaning the Grille and Light Cover: Periodically clean the decorative grille and light cover. Disconnect power before cleaning. Use a soft, damp cloth with mild soap and water. Avoid abrasive cleaners or solvents that could damage the finish.
• Motor Maintenance: The brushless DC motor is designed for long-lasting, maintenance-free operation. No lubrication or internal cleaning is typically required.
• Ducting Inspection: Annually inspect the exhaust ducting for any blockages, kinks, or damage that could restrict airflow. Ensure all connections remain secure.

Troubleshooting

If you encounter issues with your VIVOHOME VH1889 Bathroom Exhaust Fan, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, please contact VIVOHOME customer support.

Specifications

Image: Detailed dimensions and components of the VIVOHOME exhaust fan.

Warranty and Support

Warranty Information

This VIVOHOME product is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, abuse, accident, or unauthorized repairs.

Customer Support

For technical assistance, warranty claims, or any other inquiries regarding your VIVOHOME VH1889 Bathroom Exhaust Fan, please contact VIVOHOME customer support. Refer to the VIVOHOME official website or your purchase documentation for the most current contact information.

Please have your model number (VH1889) and proof of purchase ready when contacting support.