YATINEY 4-Tier Shoe Rack Instruction Manual

1. Introduction

Thank you for choosing the YATINEY 4-Tier Shoe Rack, Model SS24BR-SS52BC. This product is designed to provide an efficient and organized storage solution for your footwear and small entryway essentials. Featuring a sturdy metal frame, durable particleboard top, and convenient non-woven fabric drawers, this shoe rack is suitable for various spaces, including entryways, hallways, and closets.

Please read this manual carefully before assembly and use to ensure proper installation and safe operation. Keep this manual for future reference.

2. Product Components

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Wooden Top Panel with Drawer Frames
• Metal Side Frames (Left and Right)
• Mesh Shelves (3 pieces)
• Non-Woven Fabric Drawers (2 pieces)
• X-shaped Iron Bars (for rear stability)
• Adjustable Feet (4 pieces)
• Anti-Tip Device (strap and hardware)
• Assembly Hardware (screws, Allen wrench, etc.)

Figure 1: Assembled YATINEY 4-Tier Shoe Rack. This image shows the complete shoe rack from an angled perspective, highlighting its wooden top, two drawers, and three mesh shelves.

3. Setup and Assembly

Follow these steps carefully to assemble your YATINEY 4-Tier Shoe Rack. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.

1. Attach Adjustable Feet: Screw the four adjustable feet into the bottom of the metal side frames. Ensure they are securely tightened but allow for minor adjustments later.
2. Assemble Metal Frame: Connect the metal side frames using the provided horizontal bars. Secure them with screws and the Allen wrench. Do not fully tighten all screws until the entire frame is assembled.
3. Install Mesh Shelves: Slide the three mesh shelves into the designated slots on the metal frame. Ensure they are properly seated and level. Secure them with screws if required by the design.
4. Attach Wooden Top Panel: Place the wooden top panel onto the assembled metal frame. Align the pre-drilled holes and secure it with screws from underneath.
5. Install X-shaped Iron Bars: Attach the X-shaped iron bars to the rear of the metal frame using the provided hardware. These bars enhance stability.
6. Insert Drawers: Unfold the two non-woven fabric drawers and insert them into the drawer compartments under the wooden top.
7. Final Tightening and Leveling: Once all components are in place, fully tighten all screws. Place the shoe rack in its desired location and adjust the feet to ensure the unit is stable and level on uneven floors.
8. Install Anti-Tip Device: For safety, especially in households with children or pets, attach the anti-tip strap to the top rear of the shoe rack and secure it to a wall stud using the provided hardware.

Figure 2: Product dimensions. This image provides a detailed diagram of the shoe rack's measurements, including width, depth, height, and spacing between shelves and drawers.

4. Operating Instructions

The YATINEY 4-Tier Shoe Rack is designed for convenient storage and organization.

• Shoe Storage: Utilize the three mesh tiers to store your shoes. Each tier can accommodate approximately 4 pairs of women's shoes or 3 pairs of men's shoes, depending on shoe size and style.
• Drawer Storage: The two non-woven fabric drawers are ideal for storing smaller items such as keys, gloves, dog leashes, hats, scarves, shoe polish, or other sundries to keep your entryway clutter-free.
• Top Surface: The wooden top panel can be used for decorative items, small bags, or as a temporary surface for items when entering or leaving your home.

Figure 3: Non-woven fabric drawers in use. This image shows the two drawers pulled open, revealing various small items stored inside, such as shoe care products and pet accessories.

Figure 4: Shoe rack in an entryway. This image displays the shoe rack positioned in an entryway, showcasing its functionality for organizing shoes and small items, with decorative elements on top.

5. Maintenance

Regular maintenance will help prolong the life and appearance of your shoe rack.

• Cleaning: Wipe the wooden top and metal frame with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish. The non-woven fabric drawers can be spot cleaned with a mild detergent if necessary.
• Stability Check: Periodically check all screws and connections to ensure they remain tight. Re-tighten if any looseness is detected.
• Leveling: Re-adjust the adjustable feet as needed to maintain stability, especially if the unit is moved or placed on an uneven surface.
• Drawer Care: Ensure drawers are not overloaded to prevent damage to the fabric or drawer mechanism.

6. Troubleshooting

7. Specifications

• Model: SS24BR-SS52BC
• Dimensions (Overall): Approximately 70.5 cm (27.7 inches) Width x 27.5 cm (10.8 inches) Depth x 75.2 cm (29.6 inches) Height
• Material: Premium Particleboard (top), Thickened Metal Frame, Non-Woven Fabric (drawers)
• Number of Tiers: 3 Mesh Shoe Shelves + 1 Wooden Top with 2 Drawers
• Weight Capacity (per mesh tier): 22 lb (10 kg)
• Features: 2 Non-woven fabric drawers, X-shaped iron bars for stability, Adjustable feet, Anti-tip device

8. Warranty and Support

For warranty information, product support, or to report missing/damaged parts, please contact YATINEY customer service directly. Refer to your purchase documentation or the YATINEY official website for contact details.

Please have your model number (SS24BR-SS52BC) and purchase date available when contacting support.