Introduction
Thank you for choosing the FILIPPO LORETI DC Collection Batmobile Chronograph Watch, Model WBW00045. This timepiece combines precision engineering with a distinctive design inspired by the iconic Batmobile. Featuring a VK63 MechaQuartz movement, a 42mm stainless steel case, and 10 ATM water resistance, this watch is built for reliability and style. This manual will guide you through the proper setup, operation, and care of your new watch.
Image: Front view of the Filippo Loreti DC Collection Batmobile Chronograph Watch, showcasing its stealth black dial and stainless steel bracelet.
Setup
Setting the Time
- Pull the crown out to the second click position.
- Turn the crown to set the hour and minute hands. Ensure the AM/PM is correctly set by observing the 24-hour sub-dial (if present) or by advancing the hands past 12 o'clock to see if the date changes.
- Push the crown back to the normal position.
Setting the Date
- Pull the crown out to the first click position.
- Turn the crown clockwise or counter-clockwise (depending on the movement) to set the date.
- Push the crown back to the normal position.
Image: The watch worn on a wrist, illustrating the overall design and placement of the crown and pushers for setting.
Operating the Chronograph
Your Batmobile Chronograph Watch is equipped with a precise VK63 MechaQuartz movement, offering accurate timekeeping and chronograph functions.
Using the Chronograph
- Start/Stop: Press the upper pusher (A) to start the chronograph. Press it again to stop.
- Reset: While the chronograph is stopped, press the lower pusher (B) to reset all chronograph hands to their zero positions.
The chronograph features three sub-dials: a 60-minute counter, a 24-hour indicator, and a small seconds hand.
Tachymeter Function
The tachymeter bezel can be used to measure speed over a known distance (e.g., 1 kilometer or 1 mile). Start the chronograph at the beginning of the distance and stop it at the end. The number on the tachymeter scale corresponding to the chronograph second hand's position indicates the average speed in units per hour.
Image: Detailed view of the watch dial, highlighting the chronograph subdials and the tachymeter scale on the bezel.
Features
- Movement: Equipped with a reliable VK63 MechaQuartz movement, combining the accuracy of quartz with the feel of a mechanical chronograph.
- Case: 42mm stainless steel case with IP black plating, providing durability and a stealth aesthetic.
- Crystal: Sapphire-coated, scratch-resistant crystal for enhanced durability and clarity.
- Water Resistance: 10 ATM (100 meters), suitable for swimming and snorkeling, but not for diving.
- Dial: Multi-layered black dial with a "Gotham City Guardian" nameplate and integrated Batman symbol in the chronograph subdial.
- Luminous Details: Blue luminous accents on the hands, indexes, and the 6H counter enhance visibility in low-light conditions.
- Strap: Black stainless steel bracelet with a deployment clasp and safety, featuring a quick-release system for easy interchangeability.
Image: The watch dial illuminated in the dark, showcasing the blue luminous hands and markers for enhanced visibility.
Maintenance
- Cleaning: Wipe the watch regularly with a soft, dry cloth to remove dust and smudges. For the stainless steel bracelet, a slightly damp cloth can be used, followed by immediate drying.
- Water Exposure: While water-resistant to 10 ATM, avoid operating the crown or pushers when the watch is wet to prevent water ingress. Rinse the watch with fresh water after exposure to saltwater.
- Temperature: Avoid exposing the watch to extreme temperatures or sudden temperature changes, which can affect its accuracy and seals.
- Chemicals: Keep the watch away from chemicals, solvents, and detergents, which can damage the case, strap, or seals.
- Battery Replacement: The watch is battery-powered. When the battery runs low, have it replaced by a qualified watchmaker to ensure proper sealing and function.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch stops or runs inaccurately | Low battery | Replace the battery. |
| Date does not change at midnight | Time is set to AM instead of PM, or vice versa | Advance the hour hand by 12 hours. |
| Chronograph hands do not reset to zero | Requires calibration | Consult a watchmaker or refer to specific movement calibration instructions if available. |
| Condensation inside the crystal | Temperature change or water ingress | Seek professional service immediately to prevent damage. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | WBW00045 |
| Movement Type | Japan Quartz (VK63 MechaQuartz) |
| Case Material | Stainless Steel |
| Case Diameter | 42 millimeters |
| Case Thickness | 13.4 millimeters |
| Band Material | Stainless Steel |
| Band Width | 20 millimeters |
| Band Length | 18 centimetres |
| Crystal Type | Glass (Sapphire-coated) |
| Water Resistance Depth | 100 meters (10 ATM) |
| Clasp Type | Deployment Clasp With Safety |
| Item Weight | 308 g |
| UPC | 842885169164 |
Image: An overview of the watch with key specifications such as case size, movement, and water resistance highlighted.
Warranty and Support
Warranty Information
This FILIPPO LORETI watch comes with a Limited Warranty. Please refer to the warranty card included with your purchase for specific terms and conditions regarding coverage and duration.
Customer Support
For any questions, service, or support regarding your watch, please contact FILIPPO LORETI customer service:
- Manufacturer: FILIPPO LORETI / EWatch Factory Corp.
- Address: 7509 E Southern Ave STE 107, Mesa, AZ 85209
- Attention: Paul Chabrat
- Phone: 1 (602) 576-3926