ROOMART 1017+1009&1010

ROOMART Dora-II Washing Machine Cabinet - 115 cm Wide - User Manual

Model: 1017+1009&1010

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your ROOMART Dora-II Washing Machine Cabinet. Please read this manual thoroughly before assembly and use to ensure safe and correct installation and to maximize the lifespan of your product.

The ROOMART Dora-II cabinet is designed as a space-saving and practical solution for housing a washing machine and/or dryer, offering additional storage space. Its flexible shelves can be used individually or removed to accommodate a dryer. The elevated height can facilitate daily laundry tasks.

Closed ROOMART Dora-II Washing Machine Cabinet in oak finish, showing its sleek design.

Image: The ROOMART Dora-II Washing Machine Cabinet in its closed state, showcasing its oak finish and modern design, suitable for various laundry room aesthetics.

Safety Instructions

  • Always ensure the cabinet is placed on a flat, stable surface.
  • Use the provided wall mounting hardware to secure the cabinet to the wall. This is crucial for stability and to prevent tipping, especially with heavy appliances.
  • Adjust the height-adjustable feet to ensure the cabinet is level and to minimize vibrations from appliances.
  • When stacking appliances, always place the washing machine on the bottom and the dryer on top to maintain stability and prevent imbalance during operation.
  • Do not exceed the maximum load capacity of 130 kg for the entire cabinet.
  • Keep small children and pets away from the cabinet during assembly and operation.
  • Ensure all screws and fasteners are tightened securely during assembly. Periodically check for loose connections.
  • Avoid exposing the cabinet to excessive moisture or direct water contact, despite its moisture-resistant properties. Wipe up spills immediately.

Components and Package Contents

The ROOMART Dora-II Washing Machine Cabinet is delivered with all necessary mounting hardware. Please verify all components are present before beginning assembly.

Included Components:

  • Cabinet body panels (E1 quality melamine-coated wood panels)
  • Doors (4 doors for the model with top cabinet)
  • Adjustable shelves (2 included, removable)
  • Height-adjustable feet
  • Wall mounting hardware
  • Hinges and handles
  • Assembly instructions (detailed, multilingual)
ROOMART Dora-II cabinet with doors open, showing internal shelves and space for a washing machine.

Image: Overview of the ROOMART Dora-II cabinet with its doors open, revealing the internal structure, adjustable shelves, and the designated space for a washing machine. This image illustrates the storage options and the general layout of the cabinet.

Setup and Assembly Instructions

Before starting assembly, ensure you have sufficient space and that the floor and wall surfaces are flat to ensure professional installation.

  1. Unpack and Identify Components: Carefully unpack all parts and compare them with the component list in the assembly instructions.
  2. Assemble the Cabinet Body: Follow the detailed assembly instructions provided to construct the main body of the cabinet. Ensure all panels are correctly oriented and securely fastened.
  3. Attach Adjustable Feet: Install the height-adjustable feet to the base of the cabinet. Adjust them to level the cabinet on your chosen surface.
  4. Install Wall Mounting: Securely attach the wall mounting hardware to the cabinet and then to a sturdy wall. This step is critical for stability and safety.
  5. Insert Shelves: Place the click-boards (shelves) into the desired positions. These shelves are removable and do not require screws for insertion, allowing for flexible configuration.
  6. Mount and Adjust Doors: Attach the doors using the provided hinges. Adjust the hinges as necessary to ensure the doors close properly and are aligned.
Technical drawing of ROOMART Dora-II Washing Machine Cabinet with top cabinet, showing dimensions and internal layout.

Image: Detailed technical drawing of the ROOMART Dora-II cabinet (with top cabinet), illustrating overall dimensions (115 cm width, 230 cm height, 73.8 cm depth) and internal compartment measurements. This diagram is essential for planning appliance placement and understanding the cabinet's structure.

Technical drawing of ROOMART Dora-II Washing Machine Cabinet without top cabinet, showing dimensions, adjustable shelves, and adjustable feet.

Image: Technical drawing of the ROOMART Dora-II cabinet (without top cabinet), highlighting key features such as the rear ventilation gap, height-adjustable shelves, and adjustable feet. Dimensions for this variant are also shown (185.8 cm height).

Operating Instructions

The ROOMART Dora-II cabinet is designed to integrate seamlessly with your laundry appliances and provide organized storage.

  • Appliance Placement:
    • For a single appliance, place the washing machine or dryer in the lower compartment.
    • If stacking, always place the washing machine in the lower compartment and the dryer in the upper compartment. Ensure the dryer is securely placed on a stable surface or stacking kit if required by the appliance manufacturer.
  • Shelf Configuration: The two included shelves can be inserted or removed as needed to create custom storage spaces for detergents, laundry accessories, or other items.
  • Ventilation: Ensure adequate ventilation around your appliances. The cabinet design includes a rear ventilation gap (7 cm) to facilitate air circulation. Do not block this gap.
  • Door Usage: Open and close the cabinet doors gently. Ensure they are fully closed when appliances are running to maintain a tidy appearance and reduce noise.
ROOMART Dora-II cabinet with a washing machine and dryer stacked inside, doors open.

Image: The ROOMART Dora-II cabinet configured to house both a washing machine and a dryer, demonstrating the stacking capability. The doors are open, showing the appliances neatly integrated within the cabinet structure.

ROOMART Dora-II cabinet with washing machine, shelves for laundry items, and a hanging rail for clothes.

Image: An example of the ROOMART Dora-II cabinet's versatile storage, featuring a washing machine in the lower section, shelves stocked with laundry essentials, and a hanging rail for clothes, showcasing its multi-functional use.

Maintenance and Care

Proper care will ensure the longevity and appearance of your ROOMART Dora-II cabinet.

  • Cleaning: The melamine-coated surface is easy to clean. Use a dry cloth or a slightly damp cloth to wipe down surfaces. Avoid abrasive cleaners or harsh chemicals, which can damage the finish.
  • Moisture Resistance: While the cabinet is moisture-resistant, it is not waterproof. Promptly wipe away any water spills or condensation to prevent damage.
  • Hardware Check: Periodically check all screws, hinges, and fasteners to ensure they remain tight. Retighten if necessary.
  • Feet Adjustment: Re-adjust the height-adjustable feet if the cabinet becomes uneven or if vibrations from appliances increase over time.

Troubleshooting

ProblemPossible CauseSolution
Cabinet is wobbly or unstable.Uneven floor; feet not properly adjusted; wall mounting not secured.Adjust the height-adjustable feet until the cabinet is level and stable. Ensure the wall mounting hardware is securely fastened to a sturdy wall.
Doors do not close properly or are misaligned.Hinges are loose or require adjustment.Adjust the door hinges according to the assembly instructions until the doors align and close smoothly. Tighten any loose hinge screws.
Excessive vibration from appliances.Cabinet not level; appliances not balanced; wall mounting not secure.Ensure the cabinet is perfectly level using the adjustable feet. Check that the washing machine or dryer is balanced according to its own manual. Verify wall mounting is secure.
Difficulty inserting or removing shelves.Shelves are not aligned correctly with the slots.Ensure the shelves are inserted straight and aligned with the designated slots. Do not force them.

Product Specifications

Model NameDora-II Washing Machine Cabinet
Model Number1017+1009&1010
BrandROOMART
Dimensions (W x H x D) - With Top Cabinet115 cm x 230 cm x 73.8 cm
Dimensions (W x H x D) - Without Top Cabinet115 cm x 186 cm x 73.8 cm
Weight90 Kilograms
MaterialE1 Quality Melamine-Coated Engineered Wood
Max Load Capacity130 kg
Special FeaturesEasy-care surface, moisture-resistant, height-adjustable feet, wall mounting included, removable shelves.
Number of Doors4 (for model with top cabinet)
Number of Shelves2 (adjustable/removable)
Assembly RequiredYes

Warranty and Support

For any questions regarding assembly, missing parts, or product defects, please contact ROOMART customer service. While specific warranty details are not provided in the product description, standard consumer rights apply.

Contact Information: Please refer to your purchase documentation or the ROOMART official website for customer support contact details.

© 2023 ROOMART. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.