Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Aauro Home Wall Display Case with Glass Doors. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
Safety Information
- Always handle glass components with care to prevent breakage and injury.
- Ensure the wall is suitable for mounting and can support the weight of the display case and its contents. Use appropriate wall anchors for your wall type.
- Do not overload shelves. Each shelf can hold up to 20 lbs (9 kg).
- Install the anti-tipping hardware as instructed to prevent the unit from falling.
- Keep electrical components (LED lights, power cords) away from water and moisture.
- Ensure all screws and fasteners are securely tightened during assembly. Periodically check for tightness.
- Keep small parts out of reach of children during assembly.
Package Contents
Verify that all components are present before beginning assembly:
- 1 x Wall Display Case Unit
- 1 x Installation Kit (includes screws, wall anchors, anti-tipping hardware)
- 1 x User Manual (this document)
- Adjustable Glass Shelves (quantity: 6)
- LED Lighting System with Motion Sensor and Control Panel
Setup and Assembly
The Aauro Home Wall Display Case is designed for easy assembly. Follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Identify all components against the parts list.
- Assemble the Frame: Follow the detailed diagrams in the included installation kit to connect the main frame pieces. Ensure all screws are tightened securely.
- Install Wall Mounting Bracket: Choose a suitable height on your wall. Drill holes using an electric drill and insert the colloidal particles (wall anchors). Fix the mounting board to the wall using the provided screws.
- Mount the Display Case: Carefully lift the assembled display case and insert it into the cutouts of the wall mounting board. Ensure it is securely seated.
- Install Anti-Tipping Hardware: Attach the anti-tipping hardware to the cabinet and wall as shown in the picture to enhance stability and safety.
- Insert Glass Shelves: Place the glass shelves into the desired positions. The shelf height is adjustable by 1.18 inches (3 cm) up or down.
- Install Glass Doors: Carefully attach the pop-up glass doors using the stable hinges. Ensure the black plastic ring is installed together with the hinge for proper function. The magnetic catch closures will secure the doors.
- Connect LED Lights: Connect the LED light strips and motion sensor module according to the wiring diagram. Plug the power adapter into a suitable electrical outlet.
For a visual guide on the assembly process, please refer to the video below:
Video: Display Case Up Close Look and Easy Assembly Process. This video demonstrates the steps for assembling and installing the display case.
Image: Visual guide for the four main assembly steps: drilling, fixing the mounting board, inserting the cabinet, and installing anti-fall hardware.
Operating Instructions
Pop-Up Glass Doors
The display case features pop-up glass doors with a no-handle design. To open, gently press the door. The magnetic catch closures will release, allowing the door to open smoothly. To close, push the door back until the magnetic catches engage.
Image: Illustration of the 'Press to Open' mechanism for the glass doors, highlighting the magnetic catch.
Adjustable Glass Shelves
The display case includes multiple glass shelves that can be adjusted or removed to accommodate items of various heights. Each shelf can be adjusted up or down by 1.18 inches (3 cm). To adjust, carefully lift the shelf, reposition the shelf pins in the desired holes, and then reinsert the shelf.
Image: Visual representation of the customizable display space and adjustable glass shelves.
3-Color LED Lights and Brightness Adjustment
The display cabinet is equipped with LED lights offering three color options: white, warm, and blue. The brightness is also adjustable.
- Change Color: Use the control panel located on the side of the cabinet. A short press on the designated button will cycle through the white, warm, and blue light options.
- Adjust Brightness: Long press the same button on the control panel to adjust the brightness level from 0% to 100%. Release the button when the desired brightness is achieved.
Image: Depiction of the three available LED light colors (blue, warm, white) and the control panel for adjustment.
Motion Sensor Design
The display case includes an intelligent human body sensor. This sensor automatically turns the LED lights on when it detects movement within approximately 1 meter (3.3 feet) and turns them off when no movement is detected for a period. This feature is energy-efficient and provides interactive illumination for your collectibles.
Image: Illustration of the human body sensing module, showing the lights activating upon approach.
For a general overview of the display case features, please watch this video:
Video: Aauro 6 Tier Graded Sports Card Wall Display Case. This video provides a general showcase of the display case and its features.
Maintenance
- Cleaning Glass: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the glass, to avoid liquid seeping into crevices.
- Cleaning Wood Surfaces: Wipe wood surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that can damage the finish.
- Dusting: Regularly dust the interior and exterior of the display case with a dry, soft cloth to maintain clarity and appearance.
- Check Connections: Periodically inspect all screws and fasteners to ensure they remain tight. Re-tighten if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights do not turn on. | Power cord unplugged; loose connection; faulty power adapter. | Check if the power cord is securely plugged into the outlet and the display case. Ensure all internal connections are firm. Try a different outlet. |
| Motion sensor not working. | Sensor obstructed; sensor dirty; insufficient movement. | Ensure the sensor is clean and unobstructed. Test with clear, deliberate movement within 1 meter. |
| Glass doors are stiff or do not pop open easily. | Magnetic catches misaligned; hinges stiff; debris in mechanism. | Check alignment of magnetic catches. Apply a small amount of silicone lubricant to hinges if stiff. Clean any debris from the door mechanism. |
| Shelves are not level. | Shelf pins not fully inserted; uneven wall mounting. | Ensure shelf pins are fully and evenly inserted into the adjustment holes. Verify the display case is mounted level on the wall. |
Specifications
Image: Detailed product dimensions, including overall size and internal shelf spacing.
| Feature | Detail |
|---|---|
| Brand | Aauro Home |
| Model Number | BD026BUS |
| Color | Black |
| Material | Wood, Glass |
| Product Dimensions (D x W x H) | 12"D x 12"W x 12"H (30.5cm D x 30.5cm W x 30.5cm H) |
| Number of Shelves | 6 (Adjustable) |
| Shelf Adjustment Range | 1.18 inches (3 cm) |
| Max Shelf Load Capacity | 20 lbs (9 kg) per shelf |
| Lighting | 3-Color LED (White, Warm, Blue), Adjustable Brightness |
| Special Features | Motion Sensor, Pop-Up Glass Doors, Wall-Mounted |
| Mounting Type | Wall Mount |
| UPC | 740625900629 |
Warranty Information
Aauro Home products are manufactured with quality and care. For specific warranty details regarding your display case, please refer to the warranty card included in your package or contact Aauro Home customer support. Keep your purchase receipt as proof of purchase for any warranty claims.
Support
If you have any questions, require assistance with assembly, or encounter any issues not covered in this manual, please contact Aauro Home customer support. Our team is available to help you.
- Website: Visit the official Aauro Home website for FAQs and support resources.
- Email: Refer to your product packaging or warranty card for customer service email address.
- Phone: Refer to your product packaging or warranty card for customer service phone number.