1. Product Overview
The DXZ L8058 A4 DTF Printer is designed for direct-to-film printing, offering high-speed and high-resolution output for various fabric applications. It features an XP600 6-color printhead, a built-in white ink stirring system, and a roll feeder for efficient operation.
Key Features:
- XP600 Printhead: Offers doubled printing speed compared to L1800 and L805 printheads, with a super high resolution of 2880*1400dpi.
- White Ink Mixing System: Ensures even ink flow and prevents pigment clumping or sedimentation, crucial for vibrant prints on both light and dark fabrics.
- Roll Feeder & Built-in Cutter: Supports both roll and sheet printing up to 8.27 inches wide, with an integrated cutter for film efficiency.
- Upgraded Motherboard: Designed to reduce failures and double-flash errors, enhancing reliability.
- V11 Printing Software: Safe, virus-free, and supports multi-tasking simultaneous printing without additional image editing software.
- Versatile Applications: Suitable for T-shirts, crafts, bags, hats, jackets, polyester, leather, and other fabrics.
What's in the Box:
- DXZ L8058 DTF Printer
- A4 DTF Oven
- DTF Ink (CMYKW)
- Transfer Film
- DTF Powder
- Maintenance Kit
- Cleaning Kit
- Cutter Kit
- Software
- User Manual
2. Setup Guide
Follow these general steps for initial setup. Refer to the included User Manual for detailed, step-by-step instructions and safety precautions.
2.1 Unpacking and Placement
- Carefully remove all components from the packaging.
- Place the printer and DTF oven on a stable, level surface with adequate ventilation.
- Ensure sufficient space around the printer for operation and maintenance.
2.2 Ink Installation
- Open the ink tank covers.
- Carefully fill each ink tank with the corresponding CMYKW DTF ink. Do not overfill.
- Close the ink tank covers securely.
2.3 Power Connection and Initial Power-On
- Connect the power cable to the printer and a grounded electrical outlet.
- Press the power button to turn on the printer. The printer will perform an initial setup sequence.
2.4 Software Installation
- Insert the provided software USB drive into a Windows PC.
- Follow the on-screen instructions to install the V11 printing software.
- Connect the printer to your PC via USB.
Note: The DTF Printer Software is compatible with Windows PCs only. It is not compatible with Mac computers.
Image: DXZ DTF Printer software is compatible with Windows PCs only.
3. Operating Instructions
This section outlines the general workflow for printing with your DXZ L8058 A4 DTF Printer.
3.1 Preparing Your Design
- Open the V11 printing software on your Windows PC.
- Import your desired design. The software supports multi-tasking simultaneous printing.
- Adjust print settings such as size, resolution (up to 2880*1400dpi), and color profiles as needed.
Video: Demonstrates the DXZ A4 DTF Printer in operation, including software usage and printing process.
3.2 Printing to DTF Film
- Load the DTF film into the printer's roll feeder or sheet tray.
- Initiate the print job from the V11 software. The printer will apply CMYKW inks to the film.
Image: The DXZ L8058 A4 DTF Printer with its roll feeder in action, printing a colorful design onto DTF film.
3.3 Powder Application and Curing
- Once the design is printed on the film, carefully remove it from the printer.
- Evenly sprinkle DTF powder over the wet ink on the film. Ensure full coverage.
- Place the powdered film into the A4 DTF Oven for curing. Follow the oven's instructions for temperature and time (typically 3 minutes at 125-150°C).
Image: A visual guide illustrating the four steps of the DTF printing process: print, powder, bake, and peel.
3.4 Heat Press Transfer
- Once the film is cured, place it onto the desired fabric (e.g., T-shirt, bag).
- Use a heat press to transfer the design from the film to the fabric. Recommended settings are 130°C for 20 seconds.
- Allow the fabric to cool slightly, then carefully peel off the DTF film.
Image: A detailed view of a vibrant lion design being transferred onto a white T-shirt using a heat press.
Video: Shows the complete process of printing a design onto DTF film, applying powder, curing, and heat pressing onto various apparel items.
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your DXZ L8058 A4 DTF Printer.
4.1 White Ink Stirring System
- The built-in white ink stirring system automatically mixes the white ink to prevent sedimentation.
- Periodically check the white ink reservoir to ensure the stirring mechanism is functioning correctly.
Image: A visual representation of the white ink mixing system, designed to ensure smooth ink flow and prevent clogging.
4.2 Print Head Cleaning
- The printer features an automatic print head cleaning and waste ink discharge system.
- Perform regular print head cleaning cycles as recommended by the software or when print quality degrades.
- Use the provided cleaning kit for manual cleaning if necessary, following the instructions in the detailed user manual.
4.3 General Cleaning
- Keep the printer's exterior clean and free of dust and ink residue.
- Regularly inspect the film path and rollers for any debris that could affect feeding.
5. Troubleshooting
This section provides solutions for common issues. For more complex problems, contact technical support.
5.1 Print Quality Issues
- Faded or Missing Colors: Perform a nozzle check and print head cleaning. Ensure ink tanks are adequately filled.
- Streaks or Lines: Clean the print head. Check for any obstructions on the print path.
- Incorrect Colors: Verify color profiles in the V11 software. Ensure correct ink types are used.
5.2 Paper/Film Feeding Issues
- Film Jams: Ensure film is loaded correctly and not wrinkled. Check the roller feeder for debris.
- Film Not Feeding: Verify the film is properly aligned in the feeder. Check for any error messages on the printer or software.
5.3 Software/Connectivity Problems
- Printer Not Detected: Ensure the USB cable is securely connected. Reinstall printer drivers if necessary.
- Software Errors: Restart the V11 software and the printer. Ensure your Windows operating system is up to date.
6. Specifications
| Feature | Specification |
|---|---|
| Brand | DXZ |
| Model Name | L8058 A4 DTF Printer |
| Connectivity Technology | USB |
| Printing Technology | DTF |
| Special Features | White ink mixing, XP600 Double the print speed, Built-in Cutter |
| Color | Blue |
| Printer Output | Color |
| Maximum Print Speed (Color) | 1 A4 page/3 minutes |
| Maximum Print Resolution | 2880 x 1400 DPI |
| Item Weight | 151 Pounds |
| Item Dimensions (D x W x H) | 14.96"D x 15.76"W x 5.91"H |
| Print Media | Fabric |
| Compatible Devices | Windows system |
| Ink Color | Cyan, Magenta, Yellow, Black, White |
| Maximum Media Size | A4 (8.27 Inches Wide) |
| Total USB Ports | 1 |
7. Warranty and Support
7.1 Warranty Information
- Printer Warranty: 1-year warranty on non-consumable parts.
- Printhead Warranty: 6-month warranty on the printhead.
7.2 Technical Support
DXZ provides professional after-sales technical support. If you encounter any problems during the installation or printing process, professional engineers are available to assist you within 24 hours.
- Technical Support Phone: +86 1587-472-8347
- Email: printmasters1@outlook.com
Image: DXZ customer support details, including phone number and email for technical assistance.