Lenovo Thinkplus TH10 TWS Stereo Headphones User Manual

Introduction

Thank you for choosing the Lenovo Thinkplus TH10 TWS Stereo Headphones. These headphones are designed to provide an immersive audio experience for both gaming and music, featuring low latency and long endurance. This manual will guide you through the setup, operation, and maintenance of your new headphones.

Package Contents

Lenovo Thinkplus TH10 TWS Stereo Headphones
Charging Cable (USB-C)
User Manual

Note: The product description mentions "Adapter" in "whats_in_the_box". This typically refers to a charging cable or a USB adapter. For clarity, we assume a standard charging cable is included.

Product Overview

Familiarize yourself with the components of your TH10 headphones.

Lenovo Thinkplus TH10 Stereo Headphones in Pink

Image: A pair of Lenovo Thinkplus TH10 over-ear headphones in pink, showcasing the earcups and headband design.

Comfortable earcups of Lenovo Thinkplus TH10 headphones

Image: Close-up view of the soft, cushioned earcup of the TH10 headphones, highlighting its comfortable design for extended wear during sports or gaming.

Control buttons and microphone on Lenovo Thinkplus TH10 headphones

Image: Diagram illustrating the control buttons and microphone placement on the TH10 headphones. Labels indicate functions for play/pause/receive, volume up/next song, volume down/last song, power on/off, and microphone location.

Setup

1. Charging the Headphones

Connect the provided USB-C charging cable to the charging port on the headphones.
Connect the other end of the cable to a USB power source (e.g., computer, wall adapter).
The indicator light will show the charging status. It typically turns off or changes color when fully charged.
Allow approximately 2-3 hours for a full charge.

2. Pairing with a Device

Ensure the headphones are fully charged and powered off.
Press and hold the Power On/Off button (labeled as '4' in the control diagram) for approximately 3-5 seconds until the indicator light flashes blue and red, indicating pairing mode.
On your device (smartphone, tablet, computer), enable Bluetooth.
Search for available Bluetooth devices and select "Lenovo Thinkplus TH10" (or similar name) from the list.
Once connected, the indicator light will typically turn solid blue or flash blue slowly.
If prompted for a password, enter "0000".

The headphones will automatically attempt to reconnect to the last paired device when powered on.

Operating Instructions

Refer to the "Control at Your Fingertips" image in the Product Overview section for button locations.

Power On/Off

Power On: Press and hold the Power On/Off button (4) for 3 seconds.
Power Off: Press and hold the Power On/Off button (4) for 5 seconds.

Music Playback

Play/Pause: Single click the Multi-function button (1).
Volume Up: Single click the Volume Up button (2).
Volume Down: Single click the Volume Down button (3).
Next Song: Long press the Volume Up button (2).
Previous Song: Long press the Volume Down button (3).

Call Management

Answer/End Call: Single click the Multi-function button (1).
Reject Call: Long press the Multi-function button (1) for 2 seconds.

Low Latency (Gaming) Mode

The TH10 headphones feature a low latency mode for an optimized gaming experience. The method to activate this mode is not explicitly detailed in the provided information. Typically, this is activated by a triple-click on a specific button or a dedicated switch. Please refer to the packaging or a more detailed product insert for specific instructions on activating gaming mode if this feature is crucial for your use.

Maintenance

Cleaning: Use a soft, dry cloth to clean the headphones. Do not use abrasive cleaners or solvents.
Storage: Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
Water Exposure: These headphones are not waterproof. Avoid exposure to water or excessive moisture.
Battery Care: To prolong battery life, charge the headphones regularly, even if not in frequent use. Avoid fully discharging the battery for extended periods.

Troubleshooting

Problem	Solution
Headphones do not power on.	Ensure the headphones are fully charged. Connect to a power source and try again.
Cannot pair with device.	1. Ensure Bluetooth is enabled on your device. 2. Make sure the headphones are in pairing mode (flashing blue/red light). 3. Move the headphones closer to your device. 4. Forget "Lenovo Thinkplus TH10" from your device's Bluetooth list and try pairing again. 5. Restart both the headphones and your device.
No sound or low volume.	1. Check the volume levels on both the headphones and your connected device. 2. Ensure the headphones are properly connected to your device. 3. Try playing different audio sources.
Microphone not working.	1. Ensure the headphones are properly connected and selected as the audio input device on your computer/phone settings. 2. Check if the microphone is muted on your device or application.

Specifications

Model Name: TH10
Brand: Generic (Compatible with Lenovo Thinkplus)
Ear Placement: Over-Ear (Note: Product images show over-ear design, contradicting some 'in-ear' specifications in source data.)
Form Factor: Over-Ear (Same note as above)
Connectivity Technology: Hybrid (Likely refers to Bluetooth with potential wired option, though not specified)
Built-In Media: Adapter (Refers to charging cable/adapter)
Features: Low Latency, Long Endurance, Built-in Mic, Stereo Sound

Note: Some specifications provided in the product data, such as "Ear Placement: In Ear" and "Form Factor: In Ear", appear to contradict the visual evidence of an over-ear headphone design. This manual describes the product as an over-ear headphone based on the provided images.

Warranty and Support

This product is covered by a standard manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact the retailer. For technical support or further assistance, please reach out to the seller or manufacturer through your purchase platform.

TH10