Introduction
The EPOMAKER Glyph keyboard combines a retro typewriter aesthetic with modern mechanical keyboard functionality. It features 83 vintage-inspired round PBT keycaps, a smart screen, a multi-function knob, and an integrated return lever. Designed for versatility, it supports multiple connectivity modes and offers extensive customization options through dedicated software.
Image: The EPOMAKER Glyph Wireless Mechanical Keyboard showcasing its retro design and RGB lighting.
Video: Close-up views of the Glyph Retro Typewriter Keyboard, highlighting its design and features.
Package Contents
Verify that all items are present in the package:
- EPOMAKER Glyph Typewriter Mechanical Keyboard
- Silicone Wrist Rest
- Detachable USB A-to-C Cable
- 2.4Ghz Wireless Receiver (stored within keyboard’s back)
- Extra Switches
- 2-in-1 Keycap-and-Switch Puller
- Pair of Extra Silicone Stands
- Quick Start Manual
- LOGO Card
Setup
Initial Charging
Before first use, fully charge the keyboard using the provided USB A-to-C cable. Connect the USB-C end to the keyboard and the USB-A end to a computer's USB port. Avoid using wall outlets for charging. A full charge may take approximately 6-12 hours.
Connecting the Keyboard
The Glyph keyboard supports three connectivity modes: Wired, 2.4GHz Wireless, and Bluetooth.
- Wired Mode: Connect the USB A-to-C cable directly from the keyboard to your device. The keyboard will operate in wired mode and charge simultaneously.
- 2.4GHz Wireless Mode: Locate the 2.4GHz wireless receiver, typically stored in the keyboard's back compartment. Plug the receiver into an available USB port on your computer. The keyboard should automatically connect.
- Bluetooth Mode:
- Ensure the keyboard is powered on and in Bluetooth pairing mode (refer to the Operating Instructions for mode switching).
- On your device (PC, Mac, tablet, smartphone), navigate to Bluetooth settings.
- Search for "EPOMAKER Glyph" or a similar device name and select it to pair.
- The keyboard can store up to three Bluetooth connections (FN + Q/W/E).
Image: The EPOMAKER Glyph keyboard, illustrating its connectivity options including the USB-C port and the location for the 2.4GHz receiver.
Operating Instructions
Power On/Off
Locate the power switch on the keyboard, typically on the side or back. Slide it to the 'ON' position to power on the keyboard and 'OFF' to power it down.
Connectivity Mode Switching
Use the following key combinations to switch between modes:
- Wired Mode: Connect USB-C cable.
- 2.4GHz Wireless: Press FN + R.
- Bluetooth 1: Press FN + Q.
- Bluetooth 2: Press FN + W.
- Bluetooth 3: Press FN + E.
Return Lever Functionality
The integrated return lever functions as follows:
- Pushing the lever Up: Acts as the Enter key.
- Pushing the lever Down: Acts as the Backspace key.
Image: The EPOMAKER Glyph keyboard demonstrating the integrated slot holding a tablet in portrait orientation.
Rotary Knob Functions
The dual-mode rotary knob provides intuitive control:
- Media Mode: Rotate to adjust volume. Press to mute/unmute. Can be remapped to skip tracks via software.
- Screen Mode: Press FN + Knob to toggle. Rotate to navigate the onboard display for information and RGB customization.
Smart Screen Display
The integrated screen displays keyboard status, time, date, and battery level. It can also showcase custom GIFs or images.
Image: The smart screen of the EPOMAKER Glyph keyboard showing the current time and date.
Customization
The EPOMAKER Glyph keyboard offers extensive customization through the EPOMAKER 3.0 software (compatible with Mac/Windows).
Software Features:
- Key Remapping: Customize key assignments.
- Macro Recording: Create and assign complex macros.
- RGB Backlight Control: Adjust dynamic and static lighting effects, colors, and brightness.
- Advanced Key Functions: Configure specialized key behaviors.
- Screen Customization: Upload GIFs or images to the smart screen.
- Sleep Mode Settings: Adjust power-saving options.
Download the EPOMAKER 3.0 software from the official EPOMAKER website for full customization capabilities.
Image: The EPOMAKER Glyph keyboard shown with its customization software interface on a computer screen, demonstrating key remapping and other settings.
Video: Instructions on how to customize the Glyph Retro Typewriter Keyboard using the EPOMAKER software.
Maintenance
Cleaning
- Use a soft, dry cloth to wipe the keyboard surface.
- For deeper cleaning, use a keycap puller to remove keycaps and clean dust or debris with compressed air.
- Avoid using harsh chemicals or abrasive materials.
Switch Replacement (Hot-Swappable)
The Glyph keyboard features a hot-swappable PCB, allowing for easy switch replacement without soldering.
- Use the provided 2-in-1 keycap-and-switch puller.
- Gently pull the keycap upwards to remove it.
- Use the switch puller to carefully grip the switch and pull it straight up.
- Align the pins of the new switch with the holes on the PCB and press down firmly until it clicks into place.
- Reattach the keycap.
Image: A visual representation of the hot-swappable switch feature, showing a switch being removed from the keyboard.
Troubleshooting
Keyboard Not Responding
- Ensure the keyboard is powered on.
- Check battery level on the smart screen or by connecting via USB-C.
- Verify the correct connectivity mode (Wired, 2.4GHz, or Bluetooth) is selected.
- For 2.4GHz, ensure the receiver is securely plugged in.
- For Bluetooth, ensure the keyboard is paired and selected in your device's Bluetooth settings. Try re-pairing if necessary.
- If using Bluetooth, remember to press FN + Q/W/E to select the correct paired device.
- Try connecting via USB-C cable to rule out wireless issues.
Keys Not Registering or Double Typing
- This can sometimes occur with sensitive switches. Consider replacing the affected switch using the hot-swap feature.
- Ensure the switch is fully seated in the PCB.
- Clean under the keycap and around the switch to remove any debris.
Screen Not Displaying Correctly
- Ensure the keyboard is powered on.
- Check the keyboard's battery level.
- If the screen is black when plugged in, this is a known behavior for some units during charging.
- Use the EPOMAKER 3.0 software to sync system time or reset screen settings.
Battery Life Issues
- Ensure the keyboard is charged via a computer USB port, not a wall adapter.
- RGB lighting significantly impacts battery life. Reduce brightness or turn off RGB to extend usage.
- Adjust sleep mode settings via the EPOMAKER 3.0 software.
Specifications
| Brand | EPOMAKER |
| Model Name | Glyph |
| Connectivity Technology | 2.4Ghz, Bluetooth, USB Wired |
| Keyboard Description | Wireless Typewriter Mechanical Keyboard |
| Number of Keys | 83 |
| Switch Type | Linear (Wisteria Linear V2 Switch) |
| Keyboard Layout | QWERTY |
| Keyboard Backlighting | RGB |
| Special Features | Backlit, Ergonomic, Hot-Swappable, Programmable Keys, Round Key, Smart Screen, Rotary Knob, Return Lever |
| Compatible Devices | Laptop, PC, Smartphone, Tablet |
| Compatible Operating Systems | Windows 7+, Mac OS 11 Big Sur+, Android, iOS |
| Battery Capacity | 8000mAh |
| Product Dimensions (L x W x H) | 13.66" x 8.15" x 2.24" (34.7cm x 20.7cm x 5.7cm) |
| Weight | 1.18kg |
| Material | ABS Plastic, Aluminum Plate |
Image: Detailed diagram illustrating the 5-layer cushioned top-mount internal structure of the keyboard.
Warranty and Support
The EPOMAKER Glyph Wireless Mechanical Keyboard comes with a 1-Year Warranty from the date of purchase.
For technical support, warranty claims, or further assistance, please contact EPOMAKER customer service through their official website or the retailer where the product was purchased. Please retain your proof of purchase for warranty validation.
