FREDEES LED Nightstand with Gun Drawer Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your FREDEES LED Nightstand with Gun Drawer. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

2. Important Safety Information

WARNING: Failure to follow these safety instructions may result in injury or property damage.

• Keep the hidden drawer locked at all times to prevent unauthorized access, especially by children.
• Always follow the assembly instructions carefully to ensure the stability and safety of the nightstand.
• Do not exceed the maximum weight recommendation of 50 pounds for the tabletop.
• Ensure all electrical connections for the charging station and LED lights are secure and properly installed.
• Keep liquids away from electrical components to prevent electric shock or damage.
• This product is intended for indoor residential use only.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Nightstand components (Engineered Wood panels)
• Hardware kit (screws, dowels, cam locks, etc.)
• Assembly Guide
• Charging Station module (pre-installed or separate)
• Installation Tool (Allen Key, Screwdriver)
• Keys for hidden drawer lock
• Foam insert for hidden drawer

4. Assembly Instructions

Assembly is required. Please follow the detailed instructions provided in the included Assembly Guide. It is recommended to have two people for assembly to ensure stability and ease of construction.

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Identify each part using the labels and the Assembly Guide.
2. Assemble the Frame: Follow the step-by-step diagrams in the Assembly Guide to connect the side panels, back panel, and base using the provided hardware. Ensure all connections are tight and secure.
3. Install Drawers: Assemble the two main drawers according to the guide. Install the drawer slides onto the nightstand frame and the drawers. Insert the drawers smoothly.
4. Install Hidden Drawer Mechanism: Carefully install the sliding top mechanism and the lockable hidden drawer as per the instructions. Test the locking function with the provided keys.
5. Integrate Electrical Components: Connect the LED light strip and the charging station module. Ensure all cables are routed safely and securely, away from moving parts or potential pinch points. Plug the power adapter into a wall outlet.
6. Final Checks: Verify that all screws are tightened, drawers slide smoothly, and the nightstand is stable.

Figure 4.1: Product dimensions for assembly planning. Dimensions are approximately 15.75"D x 17.7"W x 22.8"H.

5. Operating Instructions

5.1 Smart Human Sensor Lights

The nightstand is equipped with a human sensor that automatically activates the LED lights when motion is detected within 1 meter. The lights will turn off after 30 seconds of no motion.

• Activation: The sensor is located on the side panel. Ensure it is not obstructed.
• Manual Control: Use the touch button on the control panel to manually turn the lights on/off or change colors.

Figure 5.1: Control panel for lights and charging ports.

5.2 3-Color Dimmable LED Lights

The integrated LED lights offer three adjustable colors (white, yellow, blue) and adjustable brightness levels.

• Change Color: Short press the light control button on the side panel to cycle through white, yellow, and blue light options.
• Adjust Brightness: Long press the light control button to adjust the brightness level (20%, 50%, 100%).

Figure 5.2: Demonstrates the three available light colors (white, blue, yellow) and brightness adjustment.

5.3 2-IN-1 Charger Station

The nightstand includes a built-in charging station with one USB port and one Type-C port.

• Charging Devices: Connect your smartphone, tablet, or other small electronic devices to the USB or Type-C port for convenient charging.
• Power Source: Ensure the nightstand is plugged into a functional wall outlet for the charging ports to operate.

Figure 5.3: Close-up of the integrated USB and Type-C charging ports.

5.4 Hidden Safe Drawer

A lockable hidden drawer is integrated into the top section of the nightstand for secure storage of valuables.

• Accessing the Drawer: Use the provided key to unlock the mechanism on the side of the nightstand. The top surface will then slide open to reveal the hidden compartment.
• Securing Items: The drawer includes a customizable foam insert. You can punch out sections of the foam to create a custom fit for your items, ensuring they are held securely.
• Locking the Drawer: After placing items inside, slide the top back into place and use the key to lock the mechanism. Remove the key and store it in a secure location away from the nightstand.

Figure 5.4: Illustration of the lockable hidden drawer and key usage.

6. Maintenance

• Cleaning: Wipe the nightstand surfaces with a dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the glossy finish.
• Drawer Slides: Periodically check the drawer slides for smooth operation. If they become stiff, a small amount of silicone lubricant can be applied.
• Electrical Components: Ensure all cables are free from damage. Do not attempt to repair electrical components yourself; contact qualified personnel.
• Lock Mechanism: Keep the lock mechanism clean and free of debris. Do not force the key if it feels stiff.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official FREDEES website. Keep your proof of purchase for any warranty claims.