Dyson WR03

Dyson Clean+Wash Hygiene Wet and Dry Hard Floor Cleaner User Manual

Model: WR03

Introduction

The Dyson Clean+Wash Hygiene is a wet and dry hard floor cleaner designed for efficient and hygienic cleaning. This appliance features a unique system that keeps waste contained within the cleaner head, preventing unhygienic filter issues, clogging, and unpleasant odors. Its advanced microfiber filaments are engineered to rapidly absorb various types of messes, while a self-cleaning mechanism effectively removes dirt and hair. The automatic waste separation system ensures dirty water is kept separate from dry debris for easy disposal. A self-clean cycle flushes the system after each use, and the hot-air drying dock helps prevent microbial growth and odors. The device offers four power modes to address different cleaning needs, from light debris to stubborn stains. For optimal results, use with Dyson 02 Probiotic formulation.

What's in the Box

Carefully unpack all components and ensure you have received the following items:

  • Dyson Clean+Wash Hygiene Wet and Dry Hard Floor Cleaner
  • Hot-air drying dock
  • Dyson 02 Probiotic hard floor cleaning solution (500mL)
  • Charger
Dyson Clean+Wash Hygiene cleaner and included accessories

Image: The Dyson Clean+Wash Hygiene cleaner along with its hot-air drying dock, cleaning solution, and charger.

Features

  • Rapid Spill and Stain Washing: Effectively removes wet spills and tough stains using capillary action to draw up waste liquid.
  • Dust and Debris Lifting: Densely packed microfiber filaments with microscopic hook-like structures grab and lift dry debris from hard floors.
  • Easy Maintenance with Hot-Air Drying Dock: Features a self-clean cycle that flushes the entire system before drying the roller with 185°F air.
  • Hygienic Filter-Free System: Cleans both dry and wet dirt without relying on an unhygienic filter, preventing bad odors.
  • Powerful Motorized Brush Bar: A Dyson motor spins the brush bar at high speed for quick and powerful dirt removal.
  • Streak-Free Finish: Highly absorbent microfiber roller with 84,000 densely-packed filaments prevents water stains and streaking.
  • No Clogging Debris: A hygienic waste system located at the cleaner head ensures dirt is not drawn upwards through the machine.
  • Fast Dry Time: Leaves less than 1g of water per square meter, allowing floors to dry within 60 seconds.
  • Hair Removal and De-tangling: The microfiber roller, embedded with nylon bristles, picks up hair even when wet. An anti-tangle comb behind the roller prevents tangling of hair up to 14 inches.
  • Self-Cleaning Roller: With each rotation, dirty water and debris are scraped from the roller before it is evenly hydrated with clean water.
Close-up of the Dyson Clean+Wash Hygiene hard floor cleaner removing hair from the floor.

Image: The cleaner's brush bar effectively removes hair from the floor.

Close-up of the Dyson Clean+Wash Hygiene hard floor cleaner's Anti-tangle comb.

Image: The anti-tangle comb prevents hair from wrapping around the roller.

Cutaway showing the automatic waste separation in the cleaner head of the hard floor cleaner.

Image: Internal view of the automatic waste separation system in the cleaner head.

Setup

  1. Assembly: Connect the main body of the cleaner to the cleaner head and handle until they click securely into place.
  2. Charging: Place the cleaner on its hot-air drying dock. Connect the charger to a power outlet. The display will indicate charging status. Ensure the appliance is fully charged before first use.
  3. Fill Clean Water Tank: Remove the clean water tank. Fill it with clean water up to the 'MAX' line. For best cleaning results, add the recommended amount of Dyson 02 Probiotic hard floor cleaning solution to the water. Securely reattach the tank.
Dyson 02 Probiotic Hard floor cleaning solution being poured into the cleaner.

Image: Pouring Dyson 02 Probiotic cleaning solution into the clean water tank.

A docked Dyson Clean+Wash Hygiene hard floor cleaner.

Image: The Dyson Clean+Wash Hygiene cleaner docked for charging and drying.

Operation

  1. Power On: Press the power button on the handle to turn on the cleaner.
  2. Select Power Mode: Use the mode selection button to cycle through the four available power modes, choosing the appropriate setting for your cleaning task.
  3. Cleaning: Guide the cleaner across your hard floors. The motorized brush bar will simultaneously wash wet spills and lift dry debris. For best results, move the cleaner in a steady, overlapping motion.
  4. Maneuverability: The cleaner is designed to be lightweight and can lie flat to reach under furniture, such as sofas and tables.
Dyson Clean+Wash Hygiene cleaner in use, cleaning a spill on a hard floor.

Image: The Dyson Clean+Wash Hygiene cleaner actively cleaning a wet spill on a hard floor.

The Dyson Clean+Wash Hygiene hard floor cleaner cleaning dry debris from the floor.

Image: The cleaner effectively picking up dry debris from a hard floor surface.

The Dyson Clean+Wash Hygiene hard floor cleaner washing wet spills from the floor.

Image: The cleaner washing away wet spills, leaving the floor clean.

The Dyson Clean+Wash Hygiene hard floor cleaner cleaning under a sofa.

Image: The cleaner's lie-flat design allows it to clean effectively under low furniture.

Maintenance

  1. Empty Dirty Water Tank: After each use, especially after wet cleaning, remove and empty the dirty water tank. Dispose of the contents hygienically.
  2. Run Self-Clean Cycle: Place the cleaner on its hot-air drying dock and initiate the self-clean cycle. This flushes the system and dries the roller to prevent odors and growth.
  3. Clean Roller and Head: Periodically inspect and clean the roller and cleaner head to remove any accumulated debris or hair. The unit is designed for quick and easy access for maintenance.
Dirty water being poured out of a wet cleaner bin.

Image: Hygienically emptying the dirty water tank after cleaning.

A cut out of the Dyson Clean+Wash Hygiene hard floor cleaner self-cleaning roller.

Image: The self-cleaning roller mechanism ensures continuous clean operation.

The Dyson Clean+Wash Hygiene hard floor cleaner hot-air drying dock.

Image: The hot-air drying dock helps maintain hygiene and prevent odors.

Troubleshooting

  • No Water Dispensing: Check if the clean water tank is filled correctly and securely attached. Ensure the water level is above the minimum mark.
  • Reduced Suction/Cleaning Performance: Verify that the dirty water tank is not full and that there are no blockages in the cleaner head or waste separation system.
  • Unusual Noises: Turn off the appliance and inspect the brush bar for any obstructions or tangled debris.
  • Appliance Not Charging: Ensure the charger is properly connected to both the dock and a working power outlet. Check for any damage to the charging cable.

For further assistance, please refer to the official Dyson support website or contact customer service.

Specifications

FeatureDetail
BrandDyson
Model NameWR03
Model Number431986-01
UPC885609043753
Form FactorUpright
Surface RecommendationHard Floor
Power SourceBattery Powered
Battery TypeLithium-Ion
Voltage14.4 Volts
Wattage70.0
Capacity0.14 Gallons
Number of Power Levels4
Control MethodTouch
Item Weight8.4 Pounds
Item Dimensions (L x W x H)11"L x 9.6"W x 43.1"H

Warranty and Support

The Dyson Clean+Wash Hygiene Wet and Dry Hard Floor Cleaner comes with a 2-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal household use.

For warranty claims, technical support, or to purchase genuine Dyson accessories and parts, please visit the official Dyson website or contact their customer service department. Keep your proof of purchase for warranty validation.